Sharif Digital Repository

Copper oxide-titania catalysts with nanocrystalline mesoporous structure were prepared by sol-gel technique using tetra isopropyl ortho titanate (TiPT) as the inorganic precursor and amino-2 ethanol as the swelling agent. Characterization was performed using X-ray diffraction (XRD), fourier transformed infrared spectra (FTIR), scanning electron microscopy (SEM), diffuse reflectance UV-Vis spectroscopy (DRS), and N2 adsorption-desorption measurements. It was found that CuO (0.025-0.1 mol ratio) has some effect on the particle size, surface area, pore-volume, pore-diameter, crystallinity of the particles, and crystalline phase of TiO2 nanocrystalline. The results indicated that 0.1 CuO-TiO2... 

Copper oxide-titania catalysts with nanocrystalline mesoporous structure were prepared by sol-gel technique using tetra isopropyl ortho titanate (TiPT) as the inorganic precursor and amino-2 ethanol as the swelling agent. Characterization was performed using X-ray diffraction (XRD), fourier transformed infrared spectra (FTIR), scanning electron microscopy (SEM), diffuse reflectance UV-Vis spectroscopy (DRS), and N2 adsorption-desorption measurements. It was found that CuO (0.025-0.1 mol ratio) has some effect on the particle size, surface area, pore-volume, pore-diameter, crystallinity of the particles, and crystalline phase of TiO2 nanocrystalline. The results indicated that 0.1 CuO-TiO2... 

Nano-structured CuO granules catalyze the C-N cross-coupling of amines with iodobenzene in excellent yields. The reaction is simple, efficient, and operates in air under ligand-free conditions  

An efficient method for the synthesis of 4-amino-5-pyrimidinecarbonitriles by the three-component reaction of malononitrile, aldehydes, and N-unsubstituted amidines under aqueous conditions using CuO microspheres as catalyst is reported. The catalyst exhibited remarkable reusable activity. Graphical abstract: [Figure not available: see fulltext.]  

In this study, the effect of adding 5–12.5 wt% CuO to TiO2 on photocatalytic properties of the nano-composite TiO2/CuO was investigated. The products were characterized by X-ray diffractometer, SEM, Brunauer–Emmett–Teller (BET), and DRS. BET-specific surface area of the TiO2/CuO composites was lower than that of the pure TiO2. Incorporation of CuO into TiO2 shifted absorption spectra to the visible region. As the CuO content increased from 0 to 12.5%, a clear decrease in optical band gap from 2.95 to 2.30 eV was observed. The photocatalytic performance was determined by methyl orange degradation and cyanide photo-oxidation under ultraviolet irradiation. However, the excessive incorporation... 

The lattice Boltzmann simulation of natural convection fluid flow and heat transfer is performed. The double-MRT lattice Boltzmann method is employed. The D2Q5 and D2Q9 lattice models are used to simulate the temperature field and flow field, respectively. The configuration of the cavity is U-shaped, and the cavity is filled with CuO-water nanofluid. The KKL (Koo-Kleinstreuer-Li) model is utilized to estimate the thermal conductivity and dynamic viscosity; as well as, the nanoparticle shape effect on the thermo-physical properties of nanofluid is considered. The streamlines, temperature distribution, local entropy generation map, average Nusselt number, magnitude of total entropy generation... 

The present study deals with the investigation of Cu2+, Ni2+ and Pd2+ chelating potential of the Schiff base, (E)-N-(2-((2-hydroxybenzylidene)amino)benzyl)-4-methylbenzenesulfonamide (H2SB). Crystal structures of Ni(HSB)2, Pd(HSB)2 and Cu(HSB)2 have been elucidated from single crystal X-ray diffraction data. NMR spectroscopy showed the presence of two conformers of Pd(HSB)2 in solution, both with an E configuration of the ligand. The determination of binding constants by fluorescence quenching showed that affinity of H2SB to Cu2+ in solution is higher than for Ni2+ and Pd2+. Since there is a high demand for selective, sensitive, rapid and simple methods to detect copper in aqueous samples... 

In this study, we present fabrication and characterization of a gas ionization sensor based on high aspect ratio one-dimensional CuO nanowires as the field enhancing medium. Self-organized arrays of CuO nanowires have been synthesized based on a low-cost thermal oxidation method and integrated into a gas ionization sensor (GIS). The self-organized arrays of CuO nanowires have been employed to detect the identity of several gas species such as He, Ar and CO at ambient temperature and pressure. The sharp nanoscale size of CuO tips provide very high electric fields at moderate voltages (less than 100 V) and provoke the breakdown of different gases. The reduced breakdown current of the metal... 

Resistive sensors composed of SnO2 and CuO, are known to be highly efficient in detection of detrimental H2S gas in terms of sensitivity, selectivity and speed. Recently, dependency of electrical response of the sensor toward H2S gas concentration has been related to the selective mechanism (formation of CuS) by a theoretical model. Another important factor in design of gas sensors is the working temperature which so far has not been explicitly explained for H2S sensing process of SnO2-CuO system. In present study, origin of this temperature for SnO2-CuO thin bilayer based on the selective mechanism has been theoretically interpreted. For this purpose, Poisson, Laplace and continuity... 

Recyclable CuO nanoparticles provide an efficient, economic, and novel method for the synthesis of quinoxaline, benzoxazine, and benzothiazine. This method provides a wide range of substrate applicability, avoids the use of organic solvents, and gives benzoheterocycles in satisfactory yields  

Enhancing stability against photocorrosion and improving photocurrent response are the main challenges toward the development of cupric oxide (CuO) based photocathodes for solar-driven hydrogen production. In this paper, stable and efficient CuO-photocathodes have been developed using in situ materials engineering and through gold-palladium (Au-Pd) nanoparticles deposition on the CuO surface. The CuO photocathode exhibits a photocurrent generation of ∼3 mA/cm2 at 0 V v/s RHE. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis and X-ray spectroscopy (XPS) confirm the formation of oxygen-rich (O-rich) CuO film which demonstrates a highly stable photocathode with retained... 

We analyze an experiment in which two distinct superconducting phases YBa2Cu3O7-δ (Y123) and Y 3Ba5Cu8O18-δ (Y358) coexisted. This experiment enabled us to characterize the recently introduced Y358 phase in contrast to the Y123 phase, thus to resolve some discrepancies reported in associated properties of Y358. Specifically, our experiment indicates the transition temperature Tmid C = 105 K and 94 K for Y358 and Y123, respectively, and that Y358 has five CuO2 planes and three CuO chains, with Pmm2 symmetry and lattice parameter (a, b, c) = (3.845, 3.894, 31.093) Å, in agreement with density functional theory predictions for this specific structure  

A simple, efficient, and practical procedure for the synthesis of imidazo[1,2-a]quinoline and quinolino[1,2-a]quinazoline derivatives using CuO nanoparticles as a novel catalyst in excellent yields is described. The catalyst can be recovered conveniently and reused at least four times without any loss of activity  

CuO flower-like microcrystals, prepared by a facile template-free thermal method, showed incredible photocatalytic activity towards degradation of Acid Blue 92 (AB92), an organic wastewater, Escherichia coli and Staphylococcus aureus pathogenic bacteria under visible light. The products were well characterised by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), scanning electron microscope (SEM), Fourier transform infrared (FTIR), photoluminescence spectroscopy (PL) and diffuse reflectance spectra (DRS) analysis methods. The XRD pattern of the products well confirmed the formation of copper oxide crystalline phase without any other impurities. The results of the photocatalytic... 

Metal Organic Frameworks (MOFs) have received enormous attention in catalysis field due to their special structures and various promising applications. One of the intriguing applications of MOFs is utilization of them as precursors for synthesis of metal oxide nanomaterials. Base on this strategy, in this work, we have applied Cu-MOF to prepare a series of noble metal nanoparticles (Ag and Au) decorated CuO (M/CuO) as efficient catalyst. As-prepared nanocomposites were characterized by various analytical techniques and their catalytic performances appraised by using of the catalytic reduction of p-nitrophenol to p-aminophenol as a reliable model reaction. Experimental results suggest that... 

Nanowire arrays of copper oxide were first grown vertically using simple and cost effective thermal oxidation method on a copper foil. Subsequently, in order to deposit and grow PbS nanocyrstalline thin films on CuO NWs by utilizing the chemical bath deposition technique, these arrays were immersed as the substrate in the reaction solution consisting of Pb(NO3)2, (NH2)2CS and NaOH. The final products were characterized in detail by which the formation of uniform, unique arrays of CuO@PbS core–shell NWs was confirmed. Due to the nature of methods employed in synthesis of this hetero structure, the tuning of core and shell size and consequently properties of the novel structure is easily... 

This research focused on making novel low-voltage SnO2 varistors by CuO addition on conventional high-voltage SnO2 varistors. Moreover, the withstand surge capability of samples was studied. The results showed that CuO addition enhances grain growth of SnO2 and coarse-grained SnO2 varistors with simple microstructures were acquired in 1 mol% CuO-doped sample. This coarse-grained SnO2 varistor presented a high nonlinear coefficient (23) and low leakage current density (23 µA/cm2) with low breakdown field value of 0.6 kV/cm. Despite the large grain size, the low residual voltage ratio (2.3) was obtained for this sample compared to the CuO-free sample. The decrease in grain electric resistivity... 

Up to now, attempts for developing coarse-grained SnO2-based varistors which exhibit high nonlinearity property at lower voltage have become a challenge without any prominent result because of its unknown grain growth mechanism. In this study, the effect of CuO addition to SnO2-based varistors as a grain growth enhancer additive on microstructural development, grain growth kinetics, and electrical properties was investigated. The characterization of grain growth kinetics showed that CuO addition encouraged grain growth and enhanced the grains size as it could be seen in the activation energy which decreased from 594 kJ/mol to 364 kJ/mol. In the samples with a low amount of CuO, the solute... 

Amine-functionalized MIL-101(Cr) has been synthesized by hydrothermal (MNH2) and post-synthetic modification (MNH2-p) approaches. Pd/MNH2 and Pd/MNH2-p have been tested in CO oxidation reaction as a gas phase reaction to clarify the difference between two synthesis approaches. Their performance has also been compared with that of Pd supported on MIL as a common MOF and CuBTC as a commercial one. The results show the significant difference between Pd/MNH2-p and Pd/MNH2, where CO conversion of 100% was not observed for Pd/MNH2-p, whereas Pd/MNH2 outperformed the others and exhibited the high reaction rate thanks to the active sites created by amorphization during the reduction process because... 

This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been retracted at the request of the Editor-in-Chief. Concern has been raised about the identity of the author “David Ross” as the listed institution has denied the affiliation of a person with this name. Further inquiry revealed that the names of the co-authors were added to the revised version of the article without notifying the handling Editor, which is contrary to the journal policy on changes to authorship. Also, the co-authors were not able to provide a reasonable description of their contribution to the article....