Loading...
Search for:
curbs
0.01 seconds
Parametric Study of Concrete Connection Retrofitted by Steel Jacketing
, M.Sc. Thesis Sharif University of Technology ; Mofid, Massoud (Supervisor)
Abstract
This study investigates the cyclic experimental behavior of damaged exterior reinforced concrete beam–column joint specimens retrofitted with the proposed technique using steel elements called steel prop and curb. The technique is usable for local and global strengthening of reinforced concrete frames. Four half-scale RC joints were tested under the cyclic loading; two control specimens with the different beam heights were loaded up to their ultimate strength and this was followed by retrofitting of these damaged specimens as new specimens and tested again under the same loading system. This study indicate the importance of some parameters such as friction , jacket place , thickness of plate...
A PID controller design to suppress chatter vibrations in the turning process studying its effect in nonlinear delayed process
, Article 10th International Conference on Modern Circuits and Systems Technologies, MOCAST 2021, 5 July 2021 through 7 July 2021 ; 2021 ; 9781665418478 (ISBN) ; Moradi, H ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2021
Abstract
High-quality, high-production-rate machining operations are significantly hindered by the regenerative chatter. Therefore, chatter suppression is of great significance; and active control is one of the best ways to curb it. In this paper, the orthogonal turning process is modeled as a single-degree-of-freedom system that includes the effect of tool wear; and described through a delay differential equation (DDE). Based on the model, stability lobes diagrams are obtained by the trial and error. The actuator force is the input for the control system and the tool vibration is the output. A classical PID controller is designed to improve the stability of the process and curb the self-excited...