Sharif Digital Repository

This paper attempted to control a hybrid DC microgrid in islanded operation mode using decentralized power management strategies. Proposed adaptive I/V characteristic for hybrid photovoltaic (PV) and battery energy storage system (BESS) and wind turbine generator (WTG) adapts the distributed energy resources (DER) behavior independently in accordance with the load demand. Hence, the PV module can spend its maximum power on load demand and spend the extra power for charging the BESS, which will regulate DC bus voltage and maintain the power balance within the microgrid. When load demand is beyond the maximum generation power of PV unit, WTG will supply the energy shortage. The proposed... 

Because of the advances in power electronics, DC-based power systems, have been used in industrial applications such as data centers [. 18], space applications [. 10], aircraft [. 12], offshore wind farms, electric vehicles [. 56], DC home systems [. 5, 20], and high-voltage DC transmission systems. To provide such sensitive loads with more reliability, efficiency, and controllability for future power systems, AC microgrid and more recently DC microgrid and smart-grid technologies have been employed [. 5-9].To obtain stable and optimal operation in DC power systems (microgrids), proper load sharing among different energy units and acceptable voltage regulation across the microgrid is... 

In this paper a novel droop approach for autonomous power management in low voltage dc microgrids based on a master-slave concept is presented. Conventional voltage-based droop approaches suffer from poor power sharing due to line resistance effects on a virtual resistance, which is solved a by introducing a communication system to increase the current sharing accuracy. In this paper, a virtual frequency is superimposed by the master units, and slave units determine their output power according to the corresponding frequency-based droop characteristics. Unlike the voltage-droop methods, the proposed virtual frequency-droop approach can be applied for proportional power management among the... 

This paper presents an effective control scheme in dc microgrids to precisely share the load current oscillatory and dc components among distributed generation (DG) units. The proposed control strategy includes current and voltage control blocks. The current control block consists of oscillatory and dc current-sharing units. The main idea of the proposed method is to share the load current oscillatory and dc components among the DG units based on their rated power, by assigning appropriate output impedance values and droop coefficients to each DG unit. The voltage control block is a multiloop voltage control unit employed to control the microgrid voltage. The detailed model of the proposed... 

In a classical ac microgrid (MG), a common frequency exists for coordinating active power sharing among droop-controlled sources. Like the frequency-droop method, a voltage-based droop approach has been employed to control the converters in low voltage direct current (LVDC) MGs. However, voltage variation due to the droop gains and line resistances causes poor power sharing and voltage regulation in dc MG, which in most cases are solved by a secondary controller by using a communication network. To avoid such an infrastructure and its accompanied complications, this paper proposes a new droop scheme to control dc sources by introducing a small ac voltage superimposed onto the output dc... 

Centralized or decentralized secondary controller is commonly employed to regulate the voltage drop raised by the primary controller. However, in the case of high capacity microgrids (MGs) and long feeders with much voltage drop on the line resistances, the conventional methods may not guarantee the voltage regulation on the load busses within a suitable range. Therefore, in addition to compensate the voltage drop of the primary controller, it is necessary to regulate the voltage of critical loads. In this paper, a new voltage regulation strategy is proposed to regulate the voltage of MG by employing the average voltage of identified critical busses, which are determined by the proposed... 

In this paper, a novel droop approach for autonomous power management in low voltage DC (LVDC) microgrids based on a master-slave concept is presented. Conventional voltage-based droop approaches suffer from poor power sharing due to line resistance effects on a virtual resistance, which is solved by introducing a communication system to increase the current sharing accuracy. In this paper, a virtual frequency is superimposed by the master units, and slave units determine their output power according to the corresponding frequency-based droop characteristics. Unlike the voltage-droop methods, the proposed virtual frequency-droop approach can be applied for proportional power management among... 

In an ac microgrid, a common frequency exists for coordinating active power sharing among droop-controlled sources. A common frequency is absent in a dc microgrid, leaving only the dc source voltages for coordinating active power sharing. That causes sharing error and poorer voltage regulation in dc microgrids, which in most cases, are solved by a secondary control layer reinforced by an extensive communication network. To avoid such an infrastructure and its accompanied complications, this paper proposes an alternative droop scheme for low-voltage dc microgrid with both primary power sharing and secondary voltage regulation merged. The main idea is to introduce a non-zero unifying frequency... 

This paper proposes a control strategy to improve the superimposed droop frequency control scheme in DC microgrids. Conventional droop-based schemes for DC microgrids control suffer from issues such as inaccurate power sharing among the sources, voltage control with insufficient quality, and adverse effect of the line resistance on the droop characteristic. To overcome these challenges, the superimposed droop frequency method has been introduced. However, the stable operation in terms of the load variations and improper voltage quality are still the challenges with this prior-art method due to the injected AC voltages. In this paper, a method is proposed to solve the stability problem and... 

Vulnerability of power electronic converters in DC microgrids in case of fault occurrence in DC cables necessitates using a fast fault detection and isolation scheme. In this paper, a modified, fast and selective protection scheme has been presented, which provides the required tripping of low voltage DC (LVDC) microgrids. This protection scheme has been developed based on the natural characteristics of the fault current, in which the first and second derivatives of the fault current have been employed to define thresholds for discriminating between faulted and non-faulted situations. To enhance fault detection capability of the protection scheme, definition of thresholds have been improved... 

This paper proposes an adaptive droop characteristic to enhance the superimposed droop frequency scheme for the control of DC microgrids. Conventional superimposed droop frequency scheme solves the poor current sharing and undesirable voltage regulation issues in DC microgrid. However, this method suffers from two main problems which are (i) instability in terms of load variation due to the limitation in transferrable reactive power, and (ii) poor voltage quality caused by the injected AC voltages in the DC system. In this paper, an adaptive droop characteristic is proposed to decrease the transferred reactive power and mitigate system overall voltage quality, and its performance is verified... 

This paper proposes a novel decentralized control approach for islanded direct-current (DC) microgrids (MGs) based on model predictive control (MPC) to regulate the distributed generation unit (DGU) output voltages, i.e. the voltages of the point of common coupling (PCC). A local controller is designed for each DGU, in the presence of uncertainties, disturbances, and unmodeled dynamics. First, a discrete-time state-space model of an MG is derived. Afterward, an MPC algorithm is designed to perform the PCC voltage control. The proposed MPC scheme ensures that the PCC voltages remain within an acceptable range. Several simulation studies have been conducted to illustrate the effectiveness of...