Sharif Digital Repository

Simultaneous water and CO2 injection has been performed on a sandstone core to evaluate oil recovery under the secondary and tertiary near-miscible injection modes. It is demonstrated that secondary SWACO2 injection as well as tertiary flood is an effective method for the oil/residual oil recovery from oil saturated/water-flooded porous media. In the secondary SWACO2 injection, the ultimate oil recovery increases by increasing SWAG ratio from 0.2 to 0.4 but due to some limits, e.g. topological effects, prohibiting contacting of injected gas with residual oil in pores, altering SWAG ratio from 0.4 to 0.6 showed no effect on ultimate oil recovery. Secondary SWACO2 injection can recover higher... 

Most condensate gas reservoirs discovered in Iran are rich in intermediate components. The phase diagram of these fluids is essential for reservoir management. The available commercial reservoir fluid simulators are not able to find the critical point of some of these condensate gas reservoirs to obtain the phase diagram quality lines. The quality lines of these reservoir's samples can be obtained experimentally using the constant mass expansion test data. The authors present experimental development of gas condensate phase diagram along with retrograde condensation and revaporization characterization during the reservoir depletion process of one Iranian condensate gas reservoir  

Recently, carbon dioxide (CO2) flooding into depleted reservoirs regardless of miscible or immiscible displacement is widely investigated not only to improve oil recovery but also to reduce the greenhouse effect of this gas produced by numbers of industries in the globe. In the light of this fact, in the first stage of this investigation, the minimum miscibility pressure (MMP) of CO2 and light crude oil (API° = 35) with low asphaltene content was determined at temperatures of 30, 50 and 80 °C using vanishing interfacial tension (VIT) method. The obtained results demonstrated that the MMP of the studied system is almost linear function of temperature with slope of 0.15 MPa/K. The interesting... 

Many oil reservoirs encounter asphaltene precipitation as a major problem during natural production. In spite of numerous experimental studies, the effect of temperature on asphaltene precipitation during pressure depletion at reservoir conditions is still obscure in the literature. To study their asphaltene precipitation behavior at different temperatures, two Iranian light and heavy live oil samples were selected. First, different screening criteria were applied to evaluate asphaltene instability of the selected reservoirs using pressure, volume, and temperature data. Then, a high pressure, high temperature filtration (HPHT) setup was designed to investigate the asphaltene precipitation...