Sharif Digital Repository

In this paper, we consider the problem of transmit code design to optimize the detection probability of an extended target embedded in Gaussian signal-dependent interference. We model the target with a priori known target impulse response (TIR) structure along with an unknown reflection factor. As is known, the performance of the generalized likelihood ratio test (GLRT) detector, for the case at hand, monotonically increases with the signal-to-interference-plus-noise ratio (SINR). Hence, we deal with the code design problem via maximizing the SINR. We also enforce a peak-to-average power ratio (PAR) constraint on the sought code. We devise a cyclic method to tackle the highly non-convex... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

The sensor selection is a technique to reduce the cost, energy consumption, and complexity of a system by discarding redundant or less useful sensors. In this technique, one attempts to select a subset of sensors within a larger set so as to optimise a performance criterion. In this work, the authors consider the detection of sources in the 3D space when the source space could be sparsely represented. The application of compressive sensing (CS) methods in this setting has been extensively studied. Their aim in this work is to carry out the task of sensor selection in a planar array without sacrificing the detection performance. Their approach is to adopt the equivalent CS model and reduce... 

In this paper, we propose a theoretical framework for cooperative abnormality detection and localization systems by exploiting molecular communication setup. The system consists of mobile sensors in a fluidic medium, which are injected into the medium to search the environment for abnormality. Some fusion centers (FC) are placed at specific locations in the medium, which absorb all sensors arrived at their locations, and by observing its state, each FC decides on the abnormality existence and/or its location. To reduce the effects of sensor imperfection, we propose a scheme where the sensors release some molecules (i.e., markers) into the medium after they sense an abnormality. If the goal... 

This paper addresses the problem of frame detection in orthogonal frequency-division multiplexing (OFDM) systems. Using fourth-order statistics, a novel approach is presented for detection of a preamble composed of two identical parts in the time domain. First, it is demonstrated that sufficient statistics for detection of a periodic preamble do not exist, and conventional methods are not optimal. Next, looking at the detection of a preamble from the viewpoints of hypothesis testing and classification, a new method is presented based on the idea that fourth-order statistics can increase class separability (between-class distance) and consequently improve detection performance. It is proven... 

Using multiple illuminators of opportunity at the transmit side and multiple antennas at the receiver side in a passive coherent location (PCL) scheme is expected to improve the detection performance. However, in such multiple-input multiple-output (MIMO) configuration choosing the position of the receivers is an obstacle that can have significant influence on the resulting performance. In this study, the authors consider the case of digital video broadcast (DVB)-T stations as non-cooperative transmitters and introduce a procedure based on the probability of missed detection to properly place receive antennas in a MIMO digital video broadcasting (DVB)-T based PCL configuration  

In this paper, the problem of coarse timing synchronization in orthogonal frequency-division multiplexing (OFDM) systems is investigated, and two new timing metrics with better performance are presented. The new metrics take advantage of two novel differential normalization functions that are based on the fourth-order statistics and are designed depending on the value of carrier frequency offset (CFO). The proposed timing metrics are theoretically evaluated using two different class separability criteria. It is shown that the new schemes considerably increase the difference between the correct and wrong timing points in comparison with previous methods. The computational complexity of the... 

In this study, a detector/estimator is proposed for compressed sensing radars, which does not need to reconstruct the radar signal, and which works directly from compressive measurements. More precisely, through direct processing of the measurements, and without the need for reconstructing the original radar signal, the system performs target detection, and then estimates range, Doppler frequency shift and radar cross section in the presence of a Gaussian clutter. It can be seen that for large compression ratios, the detection performance and estimation quality is comparable with a common radar system while having a much lower data rate and with less computational load  

Two gains play key roles in recently developed multiple-input-multiple-output (MIMO) wireless communication systems: 'spatial diversity' gain and 'spatial multiplexing' gain. The diversity gain (DG) refers to the capability to decrease the error rate of the MIMO channel, whereas the multiplexing gain (MG) implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the DG) and increasing data rate (via an increase in the MG). On the other hand, recently, MIMO radars have attracted much attention for their superior... 

In this paper, we propose a two dimensional optimal linear detector (2-D OLD) for slowly fluctuating target in Gaussian interference. We assume that the samples of received signal in the range and in the successive pulsation times are collected in a two dimensional array. In conventional detectors, each column of this matrix (the Samples of the same pulsation time) is detected separately and the binary results may be integrated for successive pulsation times in order to improve the detection performance. In fact, by applying binary integration, we ignore the considerable correlation among 2-D data in the azimuth direction. In the proposed 2-D OLD detector, this correlation is considered,... 

Transformer turn-to-turn fault (TTF) is one of the most difficult failures to detect. The negative sequence percentage differential current (NSPD) and extended park vectors approach (EPVA) are the two most promising methods for detection of the TTF inception. In this paper, in order to evaluate the performance of these methods, various experimental tests are carried out to detect the TTF initiation on the winding of the transformer under different operating conditions such as: No-load operation, when an external fault or an open conductor fault is also occurred. The results show that the setting of the proper thresholds plays the main role in the reliable and secure performance of NSPD and... 

In this paper, we propose a novel method for irregularity detection. Previous researches solve this problem as a One-Class Classification (OCC) task where they train a reference model on all of the available samples. Then, they consider a test sample as an anomaly if it has a diversion from the reference model. Generative Adversarial Networks (GANs) have achieved the most promising results for OCC while implementing and training such networks, especially for the OCC task, is a cumbersome and computationally expensive procedure. To cope with the mentioned challenges, we present a simple but effective method to solve the irregularity detection as a binary classification task in order to make... 

Accurate modeling of sea clutter and detection of low observable targets within sea clutter are the major goals of radar signal processing applications. Recently, fractal geometry has been applied to the analysis of high range resolution radar sea clutters. The box-counting method is widely used to estimate fractal dimension but it has some drawbacks. We explain the drawbacks and propose a new fractal dimension based detector to increase detection performance in comparison with traditional detectors. Both statistically generated and real data samples are used to compare detector performance  

As the DVB-T (Digital Video Broadcasting-Terrestrial)'s use is outspreading, one of its interesting emerging applications is to use DVB-T stations as non-cooperative transmitters in order to detect and localize targets. An important and favorable characteristic of DVB-T for this application is its being working in a Single Frequency Network (SFN), so that multiple transmitters can be used simultaneously to detect the targets. In addition, using multiple antennas at the receiver side leads to the well known configuration known as MIMO. However, one of the obstacles, arisen in such configurations, is the receive antennas' placement in proper positions so that the detection performance is... 

In a MIMO (Multiple Input Multiple Output) radar system, proper design of transmit signal and receive filter is an advantageous tool to improve the detection performance. Thus, in this paper, we consider the problem of transmit code and receive filter design, in order to maximize the Signal to Noise Ratio (SNR) at the receiver while enforcing a similarity constraint between the transmit space-time code (STC) and a reference STC which has a desirable ambiguity function. We will show that by solving such constrained optimization problem through successive iterations, our proposed method leads to satisfactory results  

The Hough transform is known to be an effective technique for target detection and track initiation in search radars. However, most papers have focused on the simplistic applications of this technique which consider a 2-D data space for the Hough transform. In this paper, a new method based on xthe Hough transform is introduced for detecting targets in a 3-D data space. The data space is constructed from returned surveillance radar signal using the range and bearing information of several successive scans. This information is mapped into a 3-D x-y-t Cartesian data space. Targets are modeled with four parameters in this data space. The proposed 3-D Hough detector is then used to detect the... 

This paper presents a feasibility study on using satellite signal for passive radar application. Our focus is on utilizing geostationary Earth orbit satellite signal with suitable properties, like Inmarsat. Then, a new method of detection for passive coherent location using adaptive filter weights variation model is presented. To evaluate the performance, three different scenarios including a low Earth orbit satellite, a space shuttle, and a high-altitude aircraft as the targets of interest are considered. In addition to being covert, it will be shown that using such passive radar system, we can benefit the forward scatter enhancement, which enables us to detect such high-altitude targets... 

Compressive sensing (CS) is a widely used technique for (multiple) target detection in multiple input multiple output (MIMO) radars. In this paper, our goal is to enhance the quality of CS-based detection techniques for a colocated MIMO radar with given location of transmit and receive nodes. Our approach is to design the transmit waveforms based on the given antenna locations and optimally allocate the total power budget among the transmitters. The design criterion in this paper is the coherence of the resulting sensing matrix. Based on this criterion, we derive and solve a convex optimization problem for power allocation. For waveform design, however, the direct method studied is... 

It is shown that the detection performance can be significantly improved using the recent technology of multiple-input multiple-output (MIMO) radar systems. This is a result of the spatial diversity in such systems due to the viewing of the target from different angles. On the other hand, the moving target indication (MTI) processing has long been known and applied in the traditional pulse radars to detect weak moving targets in the presence of strong clutter signals. The authors propose a procedure based on the compressive sensing idea, in order to apply the MTI processing in a MIMO radar with widely separated antennas. Although a clutter is included in the signal model and a different... 

Compressive sensing (CS) has been widely used in multiple-input-multiple-output (MIMO) radar in recent years. Unlike traditional MIMO radar, detection/estimation of targets in a CS-based MIMO radar is accomplished via sparse recovery. In this article, for a CS-based colocated MIMO radar with linear arrays, we attempt to improve the target detection performance by reducing the coherence of the associated sensing matrix. Our tool in reducing the coherence is the placement of the antennas across the array aperture. In particular, we choose antenna positions within a given grid. Initially, we formalize the position selection problem as finding binary weights for each of the locations. This...