Sharif Digital Repository

Electrochemical exfoliation of graphite has recently attracted a big attention as a simple, fast and scalable method for the preparation of high quality graphene, but there are some drawbacks that hinder its application. Direct deposition is one of the most critical challenges that makes it difficult to deposit uniform, compact and large scale graphene thin films. This work develops a facile electrophoretic deposition route to fabricate exfoliated graphene (EG) film on Ag nanowires (NWs) networks with a controllable film thickness in nanometers scale. EG thin films are deposited with different applied potentials and times from an EG dispersion in N, N-dimethylformamide solvent. Since... 

Thin film composites (TFCs) as forward osmosis (FO) membranes for seawater desalination application were prepared. For this purpose, polyacrylonitrile (PAN) as a moderately hydrophilic polymer was used to fabricate support membranes via nonsolvent-induced phase inversion. A selective thin polyamide (PA) film was then formed on the top of PAN membranes via interfacial polymerization reaction of m-phenylenediamine and trimesoyl chloride (TMC). The effects of PAN solution concentration, solvent mixture, and coagulation bath temperature on the morphology, water permeability, and FO performance of the membranes and composites were studied. Support membranes based on low PAN concentrations (7 wt... 

This study investigates the effects of polymer concentration and solvent type on the pore size distribution (PSD) of the fabricated gas-liquid membrane contactors (MCs). Eighteen flat-sheet MCs are fabricated using polysulfone (PSf) and polyethersulfone (PES) polymers, with polymer concentration of 10%, 15%, and 20%. Dimethylformamide (DMF) and n-methyl-2-pyrrolidone (NMP) solvents are used to prepare the polymeric solutions. The role of polyvinylpyrrolidone (PVP) on the mean pore size of MCs is also studied. Scanning electron microscope (SEM) analysis is applied to visualize the pore system of the fabricated MCs. Image processing technique is used to obtain the PSD of the fabricated MCs... 

Structural and intermolecular interactions of solvatochromic probes 4-nitroaniline, 4-nitroanisole, and Reichardt’s dye were investigated in the binary mixtures of 2-hydroxy ethylammonium formate as an ionic liquid with N,N-dimethyl formamide, dimethyl amine, and dimethyl sulfoxide. Solvatochromic parameters (ETN, normalized polarity parameter; π*, dipolarity/polarizability; β, hydrogen-bond acceptor basicity; α, hydrogen -bond donor acidity) were determined in ionic liquid mixtures at 25 °C using UV−vis spectroscopy. ETN parameters obtained from absorbance of Reichardt’s dye within various mixtures of ionic liquid were observed to be higher than predicted values from ideal additive... 

Structural and intermolecular interactions of solvatochromic probes 4-nitroaniline, 4-nitroanisole, and Reichardts dye were investigated in the binary mixtures of 2-hydroxy ethylammonium formate as an ionic liquid with N,N-dimethyl formamide, dimethyl amine, and dimethyl sulfoxide. Solvatochromic parameters (ETN, normalized polarity parameter; π, dipolarity/polarizability; β, hydrogen-bond acceptor basicity; α, hydrogen -bond donor acidity) were determined in ionic liquid mixtures at 25°C using UV-vis spectroscopy. ETN parameters obtained from absorbance of Reichardt dye within various mixtures of ionic liquid were observed to be higher than predicted values from ideal additive behavior.... 

The presence of dyes as pollutants in wastewater sources from textile industries can cause significant health issues if they are not adequately treated. Dye adsorption to entrap contaminants in nanoparticle pores has created considerable attention in recent years due to the environmental concerns occurring as a result of spillage of dyes in water bodies. In efforts to understand adsorption capability UiO-66, metal-organic frameworks (MOFs) were developed and examined for the separation of four pollutant dyes containing methyl red (MR), methyl orange (MO), malachite green (MG), and methylene blue (MB), which are widely used in textile industries. The adsorbent structural stability in water,... 

Membrane separator based on the polyvinylidene fluoride (PVDF) is prepared via the non-solvent-induced phase separation (NIPS) method with water and ethanol as non-solvent and a mixture of dimethylformamide (DMF) and acetone as solvent. The effect of various acetone/DMF ratios and non-solvent material on the physical and electrochemical properties of the separator is studied by FE-SEM, tensile strength, electrochemical AC-impedance spectroscopy (EIS), thermal stability, and linear sweep voltammetry (LSV). The charge-discharge studies are carried out by fabricating a lithium foil/polymer electrolyte membrane/LiFePO4 cell. The results show that with the change of solvent and non-solvent, the... 

Metal-organic frameworks (MOFs) have recently achieved much attention to eliminating toxic pollutants because of their attractive attributes, including large specific surface area, ultra-high porosity, abundant active adsorption sites, tunable surface chemistry, well-controlled pore size distribution, and strong host–guest interactions. Among the many developed MOFs, the Zr-based MOFs, particularly the UiO-66 family, are considered extremely attractive for wastewater treatment applications. The fascinating properties of UiO-66 such as high thermal stability, superior chemical resistance towards several solvents, including benzene, acetone, different alcohols, dimethylformamide, acidic and... 

In this study, superhydrophobic dual layer membranes with highly porous structure were fabricated using electrospinning and electrospraying techniques. Electrospinning method was used to produce the support nanofibrous layer using polyvinylidene fluoride-co-hexafluoropropylene (PH) as the polymer and a mixed solvent system of N,N-Dimetylformamide (DMF) and acetone. Afterwards, hydrophobic, functionalized TiO2 nanoparticles were deposited on the surface of the support layer using the electrospraying technique. TiO2 chemical functionalization and their deposition on the support layer were investigated by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy. The... 

This work reports on the potential application of UiO-66 in gas sweetening and its structural stability against water, air, dimethylformamide (DMF), and chloroform. The UiO-66 nanoparticles were solvothermally synthesized at different scales and activated via solvent exchange technique using chloroform, methanol, and ethanol. Thus prepared and aged MOFs were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), and nitrogen adsorption-desorption analysis. The chloroform-activated MOF showed the largest surface area among all activation solvents, and presented high uptakes of 8.8 and 4.3 mmol/g for CO2... 

We have investigated hydrogen sensing properties of electrodeposited Pd clusters on macroporous silicon substrates. Porous layer was prepared by electrochemical etching of p-type silicon (100) wafer in organic electrolyte DMF (dimethylformamide) diluted by HF (%95 Vol. %). The deposition of Pd was carried out by linear voltammetry (LV) technique. This technique was taken for reduction of palladium ions in the potential range from 0.4 V to -1 V vs. SCE, at the scan rate of 20 mV s-1. Some samples were annealed at 300°C for an hour in air to study the effect of heat treatment on their gas sensitivity. Surface structural and chemical properties of the samples were characterised using Scanning... 

A novel sulfoxide containing bis(ether amine) monomer, 2,2'-sulfoxide- bis[4-methyl(2-trifluoromethyl)4-aminophenoxy) phenyl ether] (M2), was synthesized from the halogen displacement of 2-chloro-5-nitrobenzotrifluoride with dibenzosulfoxide (DH) in the presence of potassium carbonate, followed by catalytic reduction of bis(ether nitro) intermediate with Zinc/Ammonium chloride. A series of organic-soluble poly(ether amide)s (PA1-7) bearing sulfoxide and electronwithdrawing trifiuoromethyl group were synthesized from bis(ether amine) with various aromatic diacids (1-7) via a direct polycondensation with triphenyl phosphite and pyridine. The resulting polymers had inherent viscosities ranging... 

Tin sulfide (SnS2) has recently attracted considerable attention due to its layered structure that may form two dimensional morphologies. It is an n-type semiconductor with band gap and electron affinity similar to CdS and In2S3; therefore can be regarded as an alternative for these materials in thin film solar cells. Here, we synthesis of SnS2 nanoparticles with different morphology in different ratio of water-ethanol mixed solution by solvothermal method, and observe that more ethanol leads to large sheet like morphologies, while water based synthesis results in very small nanosheets. A challenge in wet deposition of device-quality thin films of SnS2 is the requirement for highly dispersed...