Sharif Digital Repository

In this paper optimization of energy consumption in an electric vehicle is presented. The main idea of this optimization is based on selecting the best gear level in driving the vehicle. Two algorithms for optimization are introduced which are based on fuzzy rules and fuzzy controllers. In first algorithm, fuzzy controller simulates energy consumption in different gear levels, and chooses the optimum gear level. While in second method, fuzzy controller detects the optimum gear level by measuring the vehicle's average speed and acceleration. To investigate the performance of these controllers, a model of TOSAN vehicle is developed and the controllers outputs are checked in simulation of TOSAN... 

Power management strategies play a key role in the design process of hybrid electric vehicles. Electric Assist Control Strategy (EACS) is one of the popular power management strategies for hybrid electric vehicles (HEVs). The present investigation proposes a new framework to advance the EACS. Dynamic Programming method is applied to an HEV model in several drive cycles, and as a result, some optimal operating regions are found. The obtained regions are almost distinct, and consequently, some threshold lines can be defined to separate them. The obtained threshold lines are used to eliminate some parameters of the EACS to reduce its sensitivity to the driving behavior. It is shown that by... 

The aim of this research is the optimisation of full-toroidal continuously variable transmission (CVT) in conjunction with the fixed ratio (FR) mechanism, while the optimisation objective is to minimise fuel consumption (FC) of the vehicle in the new European driving cycle. After the dynamic analysis of the power train, a computer model is developed to simulate contact between CVT elements and consequently calculate its efficiency. Then an algorithm is presented to calculate FC of the vehicle in the driving cycle. Then, an optimisation using particle swarm optimisation on the CVT geometry and FR mechanism (which is embedded between CVT and final drive) is carried out to minimise FC. It is... 

One solution to reduce fuel consumption (FC) of vehicles is to use infinitely variable transmission (IVT) as the power train. However, inappropriate design of IVT leads to an inadequate decrease in the vehicle FC. Therefore, in order to reach a maximum fuel economy, an optimization on the power train proves to be necessary. The present article aims to optimize IVT to decrease the vehicle FC in a driving cycle. The results have revealed that the FC of the vehicle equipped with the optimized IVT is approximately 7% and 4.7% compared to the cases of using the optimized six-speed and nine-speed manual transmissions, respectively  

This paper compares the dynamic and static models of a Lithium-ion battery pack with its electrochemical model as energy storage of an electric vehicle according to the environmental protection agency drive cycles. The dynamic model or the RC equivalent circuit includes a voltage source and double parallel resistor and capacitor networks which are connected in series. The static model includes a voltage source and resistors. Given drive cycles, these models are compared in terms of the battery voltage, state-of-charge, and power loss in an electric vehicle in MapleSim software. Although the state-of-charge and power loss of both models are identical to each other, actually the terminal... 

Fault monitoring in internal-combustion engines is crucial for keeping the vehicle performance within the acceptable standards of emission levels and drivers' demands. This paper analyses how a vehicle's performance and engine variables are affected by a leakage fault in the exhaust manifold. The threshold leakage that causes the vehicle to exceed the emission standards is determined for a class M1 vehicle tested on a chassis dynamometer over the New European Driving Cycle. It is shown that, when a leakage of 6 mm diameter on the exhaust manifold is introduced, the vehicle emissions exceed those specified in the European 2013 on-board diagnostics standard. In addition, the effects of the... 

In this paper, an optimized control strategy is proposed for a split parallel hydraulic hybrid truck. The model of the vehicle was simulated in Simulink. According to a global optimization technique, a fuzzy control strategy is developed for the vehicle. This strategy shows flexibility for different drive cycles and a desirable fuel consumption reduction, especially for a low speed drive cycle, which is extracted according to an urban utility vehicle mission  

The need for service passenger cars, like taxies and governmental vehicles, to work in central Tehran that can produce less emission has been the main drive behind this research. A series hybrid pneumatic vehicle based on Iran manufactured Samand Passenger car was developed using commercially available components. The idea is to use as much standard parts as possible to reduce the development and manufacturing costs of the developed hybrid car. The vehicle space and weight limitations and the fixed geometry have been the main constraint in adoption of the components. The calculations show that the designed vehicle succeeds to satisfy the requirements set by driving cycle, but requires... 

Development of hybrid cars is the most popular subject among automotive engineers both in production and research. The need for service passenger cars, like taxies and governmental vehicles, to work in central Tehran that produce less emission has been the main drive behind this paper. A parallel hybrid pneumatic vehicle based on Iran manufactured Samand passenger car was developed using commercially available components. The idea is to use as many standard components as possible to reduce development and manufacturing costs. The vehicle space and weight limitations and fixed geometry have been the main constraint in adoption of the components. In this design the 75 kW engine of the Samand... 

One of the main subjects under consideration of automotive companies seeking for higher efficiency and lower atmospheric pollution is the usage of hybrid vehicles instead of usual internal combustion engine driven cars. Developing a service car for commutation in the city centers that can produce less emission has been the main idea behind this research. The preliminary design of a series Hybrid-Pneumatic vehicle based on Samand platform satisfying the requirements of ECE-15 driving cycle is presented in this paper. One of the main goals is to use as much standard parts as possible to reduce the development and manufacturing costs. The vehicle space, fix geometry and weight limitations have... 

The development of an efficient hybrid electric vehicle (HEV) platform needs an optimal design of its powertrain layout. This study is concerned with parallel HEVs (PHEVs) equipped with continuous transmission. First, different types of continuous transmissions, including continuously variable transmission (CVT), power-split CVT (PS-CVT) and multi-fixed ratio PS-CVT (MF-CVT), are discussed and their simulation models are presented. Also, various combinations of these continuous transmissions with PHEV configurations (namely, pre-transmission and posttransmission configurations) are introduced. Then, for a given PHEV model, several powertrain layouts resulting from combining the considered... 

In this paper, a new software is introduced that is developed to give the most appropriate solution for the component selection and design of a hybrid electric bus. There are several simulation programs that can simulate behavior of a hybrid electric bus, but most of them are not able to suggest the best design and the best choice of the components. Customer requirements are dissimilar and there are several different parameters that they may need. Cost, pollution, driving cycle, battery type, DC link voltage, weight, volume, fuel consumption, and acceleration are some parameters that vary from one customer to the other. The stated software that is developed and presented by this paper will... 

New concepts and strategies are continually being investigated to meet fuel efficiency targets for new generations of internal combustion engines. Thermal management methods can reduce fuel consumption by up to 4%. One approach for thermal management is a map-controlled thermostat. In the current work, this concept is investigated through a benchmarking approach and a methodology for deriving the response time curve for this type of thermostat. To better explore the benchmarking idea, characteristics of map-controlled thermostats for two different engines are identified, analyzed, and compared. Finally, the effects of two separate map-controlled thermostats on the average fuel consumption of...