Sharif Digital Repository

Results of the seismic performance assessment of a new structural system that has been used in a 54-story reinforced concrete building are presented. The structure, which is still under construction, and has a 'Y-shape' form, utilizes a special structural system that does not include any beams or columns. Instead, walls and slabs are used for carrying both gravitational and lateral loads. The general distinctions of the system are discussed. The structural efficiency of the system is compared with other conventional systems in some existing tall buildings. The seismic responses and dynamic behavior of the structure that were achieved by conducting various analyses are presented. The effects... 

In the present paper, a decentralized control algorithm is considered for actively controlling the response of flexible tall building structures under earthquake excitations. Sliding mode control is used as a base control algorithm and a decentralized scheme of that is presented. In the proposed approach, the building is divided into several substructures and for each subsystem a separate local control algorithm is designed. The control algorithm consists of the sliding surface and the reaching law equations. A numerical example is used to demonstrate the efficiency of the control algorithm in guaranteeing the system's global stability under the effects of subsystem interconnections and... 

One of the acceptable assumptions in engineering practice is vertical propagation of earthquake waves. When the source of earthquake is located very deep in the ground, this assumption is valid, but for sources located in shallow ground, it loses its viability. In this study, linear seismic analysis of a system of concrete dam-massed foundation-reservoir is performed under inclined earthquake excitation. Both P- and SV-type earthquakes are considered for the purpose of the seismic analysis. To consider the effects of inhomogeneous waves for the case of SV wave propagation, post-critical angles are also considered in the analysis. To investigate the effects of earthquake frequency content on... 

Steel plate shear walls are lateral load resisting systems, especially against earthquake excitation. They are constructed with or without stiffeners. Stiffened walls are more ductile than those without stiffeners. In this research a numerical study using finite element analysis via a finite element program is conducted. Nine thin steel plate shear wall models were considered in three groups of 5-storey, 10-storey and 15-storey walls. In each group different yield point steel for the infill plate was used. The yield points of infill plates were assumed to be 160, 200 and 240 MPa. The results showed that using low yield point (LYP) steel will increase energy dissipation of models by up to... 

In this paper, the effect of various arrangements of displacement, velocity and acceleration related weighting matrices on the performance of active control systems on nonlinear frames has been studied. Different arrangements of weighting matrices and feedback combinations of the response have been considered to design the active controllers using a single actuator for reducing the response of an eight-storey bilinear hysteretic frame under white noise excitations. The nonlinear Newmark-based instantaneous optimal control algorithm has been used, where the distributed genetic algorithm (DGA) is employed to determine the proper set of weighting matrices. For each set of feedback and weighting... 

One of the acceptable assumptions in engineering practice is vertical propagation of earthquake waves. When the source of earthquake is located very deep in the ground, this assumption is valid, but for sources located in shallow ground, it loses its viability. In this study, linear seismic analysis of a system of concrete dam-massed foundation-reservoir is performed under inclined earthquake excitation. Both P- and SV-type earthquakes are considered for the purpose of the seismic analysis. To consider the effects of inhomogeneous waves for the case of SV wave propagation, post-critical angles are also considered in the analysis. To investigate the effects of earthquake frequency content on... 

Investigation of the dynamic characteristics of an existing structure system based on field tests is of practical significance, since it can be employed in the field of examining construction quality, validating or improving analytical finite element structural models, or conducting damage assessment. The main purpose of this study is to investigate the dynamic characteristics of dams using the seismic response data. Whereas, in the process of frequency domain identification of dam properties, frequency response function (FRF) plays the most important role, evaluating the corresponding parameters with better accuracy has always been desirable. Therefore, a comparison was made between some... 

The preliminary design of building structures is normally based on the equivalent lateral forces provided in seismic design guidelines. The height-wise distribution of these loads is predominantly based on elastic vibration modes. However, as structures exceed their elastic limits in severe earthquakes, these design load patterns may not necessarily lead to efficient distribution of strength within the structures. To address this issue, several alternative load patterns have been proposed for the seismic design of non-linear structures. However, due to the simplifications involved in the development of these design load patterns, their adequacy needs to be assessed for different structural... 

In this study, the performance of a proposed friction damper with two slip loads in controlling the seismic response of steel moment resisting buildings structures under moderate and intense earthquake excitations is investigated. The proposed friction damper initially operates with a smaller slip load and could shift to the higher slip load after a certain amount of slippage when subjected to intense ground motions. In this regard, the hysteresis behavior of the proposed double slip loads (DSL) friction damper is modeled and after necessary verifications is imported to the material library of OpenSees software to be used for parametric study. To evaluate the performance of the proposed DSL... 

The lateral response of a single degree of freedom (SDOF) structural system containing a rigid circular cylindrical liquid tank, under harmonic and earthquake excitations is considered. The governing differential equations of motion for the combined system is derived considering the first 3 liquid sloshing modes (1,1), (0,1), and (2,1), under horizontal excitation. The system is considered nonlinear due to the convective term of liquid acceleration and the nonlinear surface boundary conditions, both caused by the inertial nonlinearity. The harmonic and seismic response of the system is investigated in the neighborhood of 1:1 and 1:2 internal resonances between the SDOF system and the first... 

Seismic response of a Single Degree of Freedom (SDOF) system containing a rigid circular cylindrical liquid tank under the earthquake excitations is considered in the presence of fluid/structure interaction. The governing differential equations of the system is derived considering the first three liquid sloshing modes (1, 1), (0, 1) and (2, 1) under different strong ground motions. The dynamic response of the system is investigated in the neighborhood of 1:1 and 1:2 internal resonances between the SDOF system and the liquid sloshing modes. These internal resonances take place by tuning the frequency of the first asymmetric sloshing mode of the liquid to the fundamental frequency of the SDOF... 

The influence of uplift on earthquake response of tall buildings via consideration the horizontal and vertical components of earthquake excitation with and without foundation uplift has been studied. A new finite element modeling method called direct modeling approach are utilized in this study to evaluate the variation of foundation uplift, lateral displacement, base shear and members' forces in each cases. The earthquake response of the models mentioned above, assuming linear behavior was compared to the response in nonlinear behavior. These studies show the importance of uplift foundation on the seismic behavior of tall buildings. The most important results in this study is base shear... 

Liquefaction is a phenomenon through which saturated sandy soil loses its shear strength and turns into a liquefied state. One of the most detrimental consequences of liquefaction is the reconsolidation volumetric settlements after the earthquakes, which is due to the dissipation of excess pore pressure caused by earthquakes. Severe floods can follow these settlements in free fields such as grounds close to the sea or rivers. Several researchers studied this phenomenon using data obtained from experiments in the lab or observations in the fields. Previous works were mainly based on a limited number of experimental observations and considered loadings and boundary conditions that were... 

The formulation of three-dimensional dynamic behavior of a Beam On Elastic Foundation (BOEF) under moving loads and a moving mass is considered. The weight of the vehicle is modeled as a moving point load, however the effect of the lateral excitation is considered by modeling: (case 1) a lateral moving load with random intensity for wind excitation and (case 2) a moving mass just in lateral direction of the beam for earthquake excitation. A Dirac-delta function is used to describe the position of the moving load and the moving mass along the beam. The beam foundations are considered as elastic Winkler-type in two perpendicular transverse directions. This model is proposed to investigate the... 

In order to estimate both maximum displacement and maximum inertia force of bilinear hysteretic system subjected to earthquake motions, an equivalent linearization approach with new effective parameters is presented. Effective mass and effective damping ratio as pair of effective parameters instead of the effective period and effective damping ratio in existing equivalent linear systems are introduced. Two error measures for displacement and inertia force are defined. Error distributions over a two-dimensional parameter space of effective parameters are analysed, and the parameters are determined through a statistical approach with a dual optimization criterion for displacement and inertia...