Loading...
Search for: electrical-conductivity-measurements
0.007 seconds

    Experimental study of nanoparticle-surfactant-stabilized CO2 foam: Stability and mobility control

    , Article Chemical Engineering Research and Design ; Volume 111 , 2016 , Pages 449-460 ; 02638762 (ISSN) Farhadi, H ; Riahi, S ; Ayatollahi, S ; Ahmadi, H ; Sharif University of Technology
    Institution of Chemical Engineers  2016
    Abstract
    CO2 injection has proved to be the most common and efficient enhanced oil recovery techniques which leads to more residual oil recovery. Unfavorable sweep efficiency which results in fingering propagation and causes early gas breakthrough is the most challenging issue of gas flooding process. The aim of this work is to study foam stability and analyze the mobility of CO2 foam stabilized by mixture of raw silica nanoparticles and ethyl hexadecyl dimethyl ammonium bromide (cationic surfactant). The result is obtained through both dynamic and static techniques using a new adsorption index.NPS-stabilized foams are generated using Ross-Miles method. A novel index for the adsorption of surfactant... 

    Oxidation behavior and electrical properties of de-siliconized aisi 430 alloy with mn1.5co1.5o4 coating for solid oxide fuel cell interconnect

    , Article Oxidation of Metals ; Volume 93, Issue 3-4 , 2020 , Pages 401-415 Bakhshi Zadeh, A ; Salmani, S ; Faghihi Sani, M. A ; Abdoli, H ; Jalili, N ; Sharif University of Technology
    Springer  2020
    Abstract
    Abstract: The effect of de-siliconization on the oxidation behavior of AISI 430 stainless steel used for solid oxide fuel cell interconnect application was investigated. De-siliconization treatment was conducted via heating steel parts in an H2 environment. The de-siliconized substrates were then coated with a Mn1.5Co1.5O4 spinel coating, using wet spray method. For comparison, a similar coating process was applied on the as-received AISI 430 stainless steel specimens. Oxidation kinetics of coated interconnects were evaluated at 700, 800 and 900 °C in air. Results showed that the de-siliconization surface treatment decreased oxidation rates, with kinetic rates (g2 cm−4 s−1) of 4.39 × 10−14... 

    Permutation betting markets: singleton betting with extra information

    , Article Proceedings of the ACM Conference on Electronic Commerce, 8 July 2008 through 12 July 2008, Chicago, IL ; 2008 , Pages 180-189 ; 9781605581699 (ISBN) Ghodsi, M ; Mahini, H ; Mirrokni, V ; Zadimoghaddam, M ; ACM SIGecom ; Sharif University of Technology
    2008
    Abstract
    We study permutation betting markets, introduced by Chen, Fortnow, Nikolova, and Pennock [3]. For these markets, we consider subset bettings in which each trader can bet on a subset of candidates ending up in a subset of positions. We consider the revenue maximization problem for the auctioneer in two main frameworks: the risk-free revenue maximization (studied in [3]), and the probabilistic revenue maximization. We also explore the use of some certain knowledge or extra information about the possible outcomes of the market. We first show that finding the optimal revenue in the risk-free model for the subset betting problem is inapproximable. This resolves an open question posed by Chen et... 

    Introducing a framework to create telephony speech databases from direct ones

    , Article 14th International Conference on Systems Signals and Image Processing, IWSSIP 2007 and 6th EURASIP Conference Focused on Speech and Image Processing, Multimedia Communications and Services, EC-SIPMCS 2007, Maribor, 27 June 2007 through 30 June 2007 ; November , 2007 , Pages 327-330 ; 9789612480295 (ISBN) Momtazi, S ; Sameti, H ; Vaisipour, S ; Tefagh, M ; Sharif University of Technology
    2007
    Abstract
    A Comprehensive speech database is one of the important tools for developing speech recognition systems; these tools are necessary for telephony recognition, too. Although adequate databases for direct speech recognizers exist, there is not an appropriate database for telephony speech recognizers. Most methods suggested for solving this problem are based on building new databases which tends to consume much time and many resources; or they used a filter which simulates circuit switch behavior to transform direct databases to telephony ones, in this case resulted databases have many differences with real telephony databases. In this paper we introduce a framework for creating telephony speech... 

    Mechanical performance of styrene-butadiene-rubber filled with carbon nanoparticles prepared by mechanical mixing

    , Article Materials Science and Engineering A ; Volume 528, Issue 24 , September , 2011 , Pages 7161-7172 ; 09215093 (ISSN) Saatchi, M. M ; Shojaei, A ; Sharif University of Technology
    2011
    Abstract
    Reinforcement of styrene-butadiene-rubber (SBR) was investigated using two different carbon blacks (CBs) with similar particle sizes, including highly structured CB and conventional CB, as well as multi-walled carbon nanotube (MWCNT) prepared by mechanical mixing. The attempts were made to examine reinforcing mechanism of these two different classes of carbon nanoparticles. Scanning electron microscopy and electrical conductivity measurement were used to investigate morphology. Tensile, cyclic tensile and stress relaxation analyses were performed. A modified Halpin-Tsai model based on the concept of an equivalent composite particle, consisting of rubber bound, occluded rubber and... 

    Synthesis and properties of Ce-doped TiO2-reduced graphene oxide nanocomposite

    , Article Journal of Alloys and Compounds ; Volume 742 , 2018 , Pages 986-995 ; 09258388 (ISSN) Ahmadi, N ; Nemati, A ; Bagherzadeh, M ; Sharif University of Technology
    Elsevier Ltd  2018
    Abstract
    A nanocomposite of Ce-doped TiO2-reduced graphene oxide (CedT/RGO) was synthesized to evaluate the synergistic effects of constituents on electrical and photoelectric properties. The nanoparticles of titania and CedT were synthesized via the sol-gel method. Then, RGO was prepared using a new version derived from the Hammer's method and hydrothermal methods. Finally, CedT/RGO nanocomposite was synthesized applying hydrothermal method. The nanoparticles and nanocomposite were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Field emission scanning electron microscopy (FESEM), Energy dispersive X-ray spectroscopy and elemental mapping. Then, diffuse reflectance and...