Sharif Digital Repository

We synthesize TiO2@SnO2 core-shell nanoparticles (NPs) by a facile two-step aqueous sol-gel method and their photocatalytic activity is compared with the pure TiO2 and SnO2 NPs for degradation of methylene blue under UV irradiation. The chemical property, crystal structure and morphology of the synthesized samples are studied by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FE-SEM) and transmission electron microscope (TEM) techniques. The mechanisms of electron–hole recombination and separation of charge carriers are studied by photoluminescence (PL) and diffuse reflectance spectroscopy (DRS). Furthermore, the kinetics... 

Novel ZnO-carbon and ZnO nanofibers were fabricated by electrospinning of polymer precursor followed by subsequent annealing in nitrogen and air, respectively. Field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) indicated the smooth and beadless nanofibers with wurtzite crystal structure. X-ray photoelectron spectroscopy (XPS) showed the presence of oxygen vacancies (VO) and chemisorbed O2 on the surface of the samples. Band gap narrowing of the ZnO-carbon nanofibers in comparison to ZnO were measured by diffuse reflectance spectroscopy (DRS). Photo-degradation of azo dye under the UV and visible light was evaluated and ZnO-carbon showed an enhancement in... 

In this work, a comparative study has been performed on two ex-situ and one in-situ doping of titania photoanodes with reduced graphene oxide. The presence of finely dispersed reduced graphene oxide facilitates electron transport and reduces electron-hole recombination resulting in a better performance of doped titania photoanodes. It was found that in-situ doping, i.e. introduction of graphene oxide in solution together with titania precursor was the most performant case of graphene doping. This result was obvious by studying dye-sensitized solar cells based on such doped photoanodes but was also and mainly analytically demonstrated by subjecting the obtained materials to characterization... 

The current study demonstrates homogenous decorating of zinc oxide quantum dots (QDs) onto graphene oxide (GO) surface via simple chemical method. The AFM image exhibited that the prepared graphene was 0.8 nm thick and hence practically monolayer. Average size of the ZnO QDs was estimated by transmission electron microscopy around 3 nm. Instrumental and chemical analyses demonstrated formation of a strong bond between ZnO QDs and GO, through C-O-Zn and C-Zn bridges. The UV-visible spectra displayed that the introduction of graphene sheets to ZnO QDs resulted in higher absorption intensity of UV as well as widening of adsorption window toward visible light for ZnO-Graphene due to chemical... 

In this study, crumpled-shape nanocomposite of nitrogen and sulfur co-doped ZnO–CeO2 (NSZC) was deposited on FTO substrate using one-step ultrasonic spray pyrolysis. Zinc acetate, cerium nitrate, and thiourea were dissolved in deionized water and used as starting solution. The samples were characterized using FESEM, XRD, UV–vis spectroscopy, EIS, and PL. The as-prepared nitrogen and sulfur co-doped ZnO–CeO2 nanocomposites were evaluated as high photocatalysts for degradation of methyl orange. Nearly 100% photocatalytic degradation of methyl orange was achieved for 180 min. The photoluminescence and electrochemical impedance spectroscopy revealed that co-doping of nitrogen and sulfur could... 

Inorganic hole-transport materials (HTMs) have been frequently applied in perovskite solar cells (PSCs) and are a promising solution to improve the poor stability of PSCs. In this study, we investigate solution-processed copper indium gallium disulfide (CIGS) nanocrystals (NCs) as a dopant-free inorganic HTM in n-i-p type PSCs. Moreover, Cs0.05(MA0.17-FA0.83)0.95Pb(I0.83Br0.17)3 mixed-halide perovskite with proper crystalline quality and long-time stability was utilized as the light-absorbing layer under ambient conditions. To optimize the cell performance and better charge extraction from the perovskite layer, the Ga concentration in the Cu(In1-XGaX)S2 composition was changed, and the X... 

Siligraphene belonging to the family of two-dimensional (2D) materials has great potential in optoelectronics due to its considerable excitonic effects. In this study, the strain effects on the electronic structure and the real-space exciton wave functions of g - SiC 7 are investigated using the first-principles calculations based on the ab initio many-body perturbation theory. Alongside the increase (decrease) of the bandgap with compressive (tensile) strain, our results show that the exciton in the siligraphene monolayer under in-plane biaxial compressive strains is much more localized than that in the case of tensile one, leading to the higher and lower exciton binding energies,... 

Photocatalytic reduction of CO2 is considered as a promising strategy for production of a wide range of renewable hydrocarbon fuels by solar energy. In this investigation, a series of Ni and Bi doped TiO2 catalysts with different Ni and Bi contents were synthesized by the conventional sol-gel method and tested for CO2 photoreduction under visible light irradiation. Synthesized nano-photo-catalysts were characterized by XRD, FESEM, TEM, DRS, PL, FTIR and BET analyses. BET results indicated that the doping of Ni or/and Bi in the TiO2 framework resulted in BET specific surface area increment with respect to pure TiO2. DRS analysis showed that Ni doped TiO2, Bi doped TiO2, and co-doped samples... 

Efficient sunlight harvesting is of great significance for environmental remediation through photocatalysis. Herein, very small (20 nm) upconverter SrF2:Yb,Tm@CaF2:Yb@Fluorine-doped TiO2heteronanoparticles (denoted as UCNPs@TiO2) with strong UV-blue emission and broadband photocatalytic performance were prepared via a facile three-step hydrothermal method for the first time. The SrF2:Yb,Tm upconverter nanoparticles (NPs) were produced as the light-emitting core, epitaxially grown CaF2:Yb as the middle shell to enhance the upconversion luminescence output and TiO2as the photocatalyst outermost layer. Superior photocatalytic functioning of UCNPs@TiO2was affirmed through methylene blue (MB)... 

Multi wall carbon nanotube (MWCNT) doped ZnO nanofibers were fabricated by electrospinning for the first time. We have successfully demonstrated the photocatalytic activity of doped nanofibers under visible light. Scanning electron microscopy showed that the diameter of MWCNT-doped ZnO nanofibers varied from 120 to 300 nm without agglomeration of MWCNT. Fourier transform infrared spectroscopy and X-ray diffraction studies proved the formation of ZnO bond and wurtzite structure with smaller crystal size in doped nanofibers. Raman spectra demonstrated slight shift in bond position after nanofiber doping, indicating the chemical bond between MWCNT and ZnO. X-ray photoelectron spectroscopy... 

ZnO/CuO nanofibers, with different CuO concentrations, were fabricated by one-step electrospinning of the polymer precursor and annealing in air. Scanning electron microscopy (SEM) showed smooth and beadless morphology for the synthesized nanofibers, while X-ray diffraction (XRD) analysis revealed formation of hexagonal and monoclinic crystalline structure phases for ZnO and CuO nanofibers, respectively. X-ray photoelectron spectroscopy (XPS) analysis confirmed the presence of CuO on the surface of ZnO nanofibers. For further confirming the formation of chemical bonds, Fourier transform infrared (FT-IR) spectroscopy was employed. The effect of Cu contents in the overall electronic band... 

The g-C3N4/Fe2O3 nanocomposite was produced by the solution combustion synthesis (SCS) of iron-nitrate/g-C3N4 mixtures of varying concentration ratios and using urea as a fuel. The following methods did characterization of the products: X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller investigation (BET), ultraviolet–visible light analysis (UV–vis) and photoluminescence measurement (PL). Effect of iron nitrate on stability and photocurrent density under simulated visible-light irradiation was determined. The...