Sharif Digital Repository

The mild and efficient oxidation of a variety of organic functional groups with a twin catalyst/oxidant, bis(phenanthroline)silver(II) peroxydisulfate, [Ag(phen)2]S2O8, is reported. This reagent shows high selectivity and the type of obtained products and the extent of oxidation are strongly dependent to the type of the functional groups and oxidant/substrate molar ratios  

Asian red ginseng was used for green reduction of chemically exfoliated graphene oxide (GO) into reduced graphene oxide (rGO). The reduction level and electrical conductivity of the ginseng-rGO sheets were comparable to those of hydrazine-rGO ones. Reduction by ginseng resulted in repairing the sp 2 graphitic structure of the rGO, while hydrazine-rGO showed more defects and/or smaller aromatic domains. The ginseng-rGO sheets presented a better stability against aggregation than the hydrazine-rGO ones in an aqueous suspension. Whilst the hydrophobic hydrazine-rGO films exhibited no toxicity against human neural stem cells (hNSCs), the hydrophilic GO and ginseng-rGO films (as more... 

We present an analytical method to obtain an expression for electron transmission through an array of disordered nanorings (ADNRs) sandwiched between two semi-infinite metallic leads in different lead-ring coupling strengths. Our approach is based on the nearest-neighbor tight-binding approximation and transfer matrix method. First, we derive an analytical formula for electron transmission across the system. Next, we apply our approach to study of the electron transport in a perfect double nanoring (PDNR) and design a NOR gate using the magnetic fluxes inputs. The conductance, current-voltage characteristics and threshold voltage of the system are calculated in the weak and strong coupling... 

In this article, the synthesis, characterization, and cyclic voltammetry (CV) measurements are reported for ferrocene-terminated oligophenyleneimine (OPI_Fc) and ferrocene-terminated conjugation-broken oligophenyleneimine (CB-OPI_Fc) self-assembled monolayers (SAMs) in two different electrolytes, namely, 1-ethyl-3-methylimidazolium-bis (trifluoromethyl-sulfonyl) imide (EMITFSI) ionic liquid and tetrabutylammonium hexafluorophosphate (Bu4NPF6) in acetonitrile (0.1 M solution). The SAMs were synthesized on Au surfaces by the sequential imine condensation reactions. CV was used to investigate the kinetics of electron transfer (ET) to the ferrocene, and it was observed that the standard ET rate... 

A nano-composite material consisting of amine functionalized TiO 2-coated carbon nanotubes was prepared and used for glucose oxidase (GOx) absorption. The GOx bearing nanomaterial was fixed on a glassy carbon electrode to construct a novel biosensor for glucose determination. The direct electrochemistry of immobilized GOx and its electron transfer parameters at the modified glassy carbon electrode were reported. The apparent heterogeneous electron transfer rate constant (ks) of GOx was estimated to be 3.5 s-1, which is higher than those reported previously. Amperometric detection of glucose resulted in a rapid (3 s) and stable response in the linear concentration range from 1.8 to 266 μM.... 

Electrochemical deposition, as a well-controlled synthesis procedure, has been used for subsequently layer-by-layer preparation of nickel hydroxide nanoparticle-reduced graphene oxide nanosheets (Ni(OH)2-RGO) on a graphene oxide (GO) film pre-cast on a glassy carbon electrode surface. The surface morphology and nature of the nano-hybrid film (Ni(OH)2-RGO) was thoroughly characterized by scanning electron and atomic force microscopy, spectroscopy and electrochemical techniques. The modified electrode appeared as an effective electro-catalytic model for analysis of rifampicin (RIF) by using linear sweep voltammetry (LSV). The prepared modified electrode exhibited a distinctly higher activity... 

A modified carbon paste electrode was prepared by incorporating the TiO2 nanoparticles in the carbon paste matrix. The electrochemical behavior of gallic acid (GA) is investigated on the surface of the electrode using cyclic voltammetry and differential pulse voltammetry. The surface morphology of the prepared electrode was characterized using the scanning electron microscopy. The results indicate that the electrochemical response of GA is improved significantly at the modified electrode compared with the unmodified electrode. Furthermore, the capabilities of electron transfer on these two electrodes were also investigated by electrochemical impedance spectroscopy. Under the optimized... 

Nickel-modified glassy carbon electrode (GC/Ni) prepared by galvanostatic deposition was used for the electrocatalytic oxidation of glucose in alkaline solutions where different electrochemical methods were employed. In cyclic voltammetry studies, in the presence of glucose an increase in the peak current of the oxidation of nickel hydroxide is followed by a decrease in the corresponding cathodic current. This suggests that the oxidation of glucose is being catalyzed through mediated electron transfer across the nickel hydroxide layer comprising nickel ions of various valence states. Under the chronoamperometric regime, the reaction followed a Cottrellian behavior and the diffusion... 

Electro-oxidation of methanol in alkaline solution at a glassy carbon electrode electrochemically modified by a conductive polymeric meso-tetra(4-carboxyphenyl)porphyrinato nickel(II), abbreviated as poly-NiTCPP and also meso-tetra(4-carboxyphenyl)porphyrin with incorporated nickel(II) cations, abbreviated as, poly-TCPP/Ni, were investigated and compared. Both films were prepared by oxidative electro-polymerization of complexes by repetitive cyclic voltammetry (RCV) in 0.1 M NaOH aqueous solution. The electrochemical properties and behaviors and also kinetic values of both films have been characterized and compared using cyclic voltammetry (CV), chronoamperometry (CA) and electrochemical... 

The present work describes the preparation and electrochemical characterization of RuO2/MWCNT/Stainless Steel Mesh (SSM) electrode as compared with a MWCNT/SSM electrode in the positive half-cell of a Vanadium Redox Flow Battery (VRFB). The electrochemical characterization of prepared electrode was carried out using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge procedures. The electrochemical activity of MWCNT/SSM modified with RuO2 as positive electrode in a VRFB was notably improved. The RuO2-included electrodes demonstrated high peak current ratio, small peak potential difference and high electron... 

In this paper, we introduce the sequential deposition method for enhancing the performance of nanocomposite counter electrodes (CEs) in quantum dot sensitized solar cells (QDSCs). Here, various CEs are made by the deposition of CuS, PbS, and CuS/PbS nanocomposite layers on an FTO (fluorine doped tin oxide) coated glass substrate by a simple successive ionic layer adsorption and reaction (SILAR) method. The result indicates that the efficiency of the cells with CuS/PbS CEs is enhanced by 2.65% compared with the bare CuS (0.99%) or PbS (1.47%) CEs. Also, no considerable improvement is observed for PbS/CuS CEs (1.09%), which indicates that the order of PbS and CuS deposition is critical for... 

Graphene-supported BiPO4/Ag/Ag3PO4 photocatalyst has been fabricated by simple hydrothermal and impregnation reaction. In BiPO4/Ag/Ag3PO4 based on Reduced Graphene Oxide (RGO), this network renders numerous pathways for rapid mass transport, strong adsorption and multireflection of incident light; meanwhile, the interface between BiPO4/Ag/Ag3PO4 and RGO increases the active sites and electron transfer rate. BiPO4/Ag/Ag3PO4 based on RGO noticeably exhibited high photocatalytic activity than that of BiPO4/Ag/Ag3PO4 and P25 under visible light irradiation for cationic dye (Rhodamine B), anionic dye (methyl orange) and 4-chlorophenol (4-CP) as a neutral pollutant, which are usually difficult to... 

Herein, we report a double-layer photoanode electrode composed of TiO2 nanoparticles active layer and a mixture of nanoparticles and newly proposed skein-like nanotubes (NTs) top layer. Such structure performs well in solar light harvesting due to first, the top layer exhibits superior light scattering and second, the active layer with high dye-loading can make better use of the back-scattered light. The results reveal that 30-40 nm nanoparticles have anatase structure, whereas 5-7 μm skein-like NTs show a mixture of anatase and rutile phases. Photovoltaic measurements demonstrate that by tuning mass ratio between nanoparticles and skein-like NTs, the cells based on single-layer photoanode... 

Due to the high activity of Au nanoparticles (NPs) for various reactions, many researchers have tried to develop heterogeneous catalysts in order to prevent irreversible agglomeration of Au NPs. Herein, magnetic graphene oxide modified with polyaniline (PANI) was used as a support for Au NPs that brings together advantages including: uniform dispersal of the catalyst in water,alarge surface area related to the graphene oxide; easy electron transfer in chemical reactions and good attachment of Au NPs to the support associated with PANI; and finally facile recovery in the presence of a magnetic field. Catalytic reduction of different analytes (Congo red, methylene blue, rhodamine B and 4-nitro... 

In this work, the antioxidant ability of fisetin was explored toward hydroxyl (•OH) radical in aqueous and lipid solution using density functional level of theory. Different reaction mechanisms have been studied: hydrogen atom transfer, single electron transfer followed by proton transfer, and radical adduct formation, and sequential proton loss electron transfer. Rate constants for all possible reaction sites have been calculated using conventional transition state theory in conjunction with the Collins-Kimball theory. Branching ratios for the different channels of reaction are reported for the first time. Results show that the reactivity of fisetin toward hydroxyl (•OH) radical takes place... 

This paper presents solid-state ligand exchange of spin-coated colloidal lead sulfide quantum dot (PbS QD) films by methylammonium iodide (MAI) and integration of them in depleted heterojunction solar (DHS) devices having an antireflecting (AR) nanocone plastic structure. Time-resolved photoluminescence measurements determine a shorter lifetime of the charge carries on a semiconductor (TiO2) electron transfer layer for the MAI-passivated QD films as compared with those with long-chain aliphatic or short thiol ligands. Consequently, the DHS device yields improved power conversion efficiency (>125%) relative to oleic-acid-passivated PbS QD films. Using anodized aluminum oxide templates, an... 

Fast transfer of photoinduced electrons and subsequent slow electron-hole recombination in semiconductor heterostructures give rise to long-lived charge separation which is highly desirable for photocatalysis and photovoltaic applications. As a type II heterostructure, CdS/TiO2 nanocomposites extend the absorption edge of the light spectrum to the visible range and demonstrate effective charge separation, resulting in more efficient conversion of solar energy to chemical energy. This improvement in performance is partly explained by the fact that CdS/TiO2 is a type II semiconductor heterostructure and CdS has a smaller energy band gap than UV-active TiO2. Ultrafast transient absorption... 

A carbon paste electrode, modified with 2, 2″-[1,7- hepthandiylbis(nitriloethylidyne)]-bis-hydroquinone and TiO 2 nanoparticles, was used for the simultaneous determination of dopamine (DA), uric acid (UA), and l-cysteine. The study was carried out by using cyclic voltammetry, chronoamperometry, and square wave voltammetry (SWV) techniques. Some kinetic parameters such as the electron transfer coefficient (α) and heterogeneous rate constant (k s) were also determined for the DA oxidation. A dynamic range of 8.0-1400 μM, with the detection limit of 8.4∈×∈10 -7 M for DA, was obtained using SWV (pH∈=∈7.0). The prepared electrode was successfully applied for the determination of DA, UA, and... 

This paper reports on the synthesis of ZnO nanowires (NWs), as well asthe compound nanostructures of nanoparticles (NPs) and nanowires (NWs+NPs) with different coating layers of NPs on the top of NWs and their integration in dye-sensitized solar cells (DSSCs). In compound nanostructures, NWs offer direct electrical pathways for fast electron transfer, and the NPs of ZnOdispread and fill the interstices between the NWs of ZnO, offering a huge surface area for enough dye anchoring and promoting light harvesting. A significant photocurrent density of 2.64mA/cm2 and energy conversion efficiency of 1.43% was obtained with NWs-based DSSCs. The total solar-to-electric energy conversion efficiency... 

A high-performing, lightweight, and flexible asymmetric supercapacitor (ASC) using NiCo-layered double hydroxide (NiCo LDH) supported on 3D nitrogen-doped graphene (NG) as a positive electrode and NG as a negative electrode is demonstrated. Highly conductive NG provides fast electron transfer and facilitates (dis)charging of NiCo LDH deposited on it. The composite electrode of NiCo LDH@NG exhibits a high specific capacitance of 1421 F g −1 at 2 A g −1 . Moreover, the as-obtained hybrid electrode shows an excellent rate capability with a specific capacitance of 1397 F g −1 at a high current density of 10 A g −1 , which is about 98% of the capacitance obtained at 2 A g −1 . The flexible ASC...