Loading...
Search for: energy-dispersive-analysis-of-x-rays
0.008 seconds

    Corrosion resistance enhancement of Ni-P-nano SiO2 composite coatings on aluminum

    , Article Applied Surface Science ; Vol. 303 , 2014 , Pages 125-130 ; ISSN: 01694332 Sadreddini, S ; Afshar, A ; Sharif University of Technology
    Abstract
    In this study, the influences of different concentrations of SiO 2 nano sized particles in the bath on deposition rate, surface morphology and corrosion behavior of Ni-P-SiO2 Composite coatings were investigated. The deposition rate of coating was influenced by incorporation of SiO2 particles. The microstructure was investigated with field emission scanning electron microscopy (FESEM). The amount of SiO 2 was examined by Energy Dispersive Analysis of X-Ray (EDX) and amount of SiO2 nanoparticles co-deposited reached a maximum value at 4.5 %wt. Corrosion behavior of coated aluminum was evaluated by electrochemical impedance spectroscopy (EIS) and polarization techniques. The results... 

    Study of the alloying additives and alkaline zincate solution effects on the commercial aluminum as galvanic anode for use in alkaline batteries

    , Article Materials Chemistry and Physics ; Volume 143, Issue 1 , 2013 , Pages 133-142 ; ISSN: 02540584 Rashvand Avei, M ; Jafarian, M ; Moghanni Bavil Olyaei, H ; Gobal, F ; Hosseini, S. M ; Mahjani, M. G ; Sharif University of Technology
    2013
    Abstract
    The corrosion behavior of different grades of commercial aluminum such as AA1040, AA5083, AA6060 and AA7075 in ZnO-containing 4 M NaOH has been determined by using open circuit potential-time measurements (OCP), galvanostatic and potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results of scanning electron microscopy (SEM) and energy dispersive analysis of X-ray (EDAX) reveal that ZnO produces the inhibition effect by the formation of a zinc-containing deposit layer on the surface of aluminum electrodes. Although the influence of zincating on the performance of aluminum alloys and considering the amount of alloying elements such as zinc, magnesium and... 

    The effect of heat treatment on properties of Ni–P–SiO2 nano-composite coating

    , Article Protection of Metals and Physical Chemistry of Surfaces ; Volume 52, Issue 3 , 2016 , Pages 492-499 ; 20702051 (ISSN) Sadreddini, S ; Afshar, A ; Sharif University of Technology
    Maik Nauka Publishing / Springer SBM 
    Abstract
    In this study, the surface morphology of Ni–P–SiO2 composite coating was investigated by field emission scanning electron microscopy (FESEM). The amount of SiO2 in the coating was examined by energy dispersive analysis of X-ray (EDX) and the Corrosion behavior of coating was evaluated by electrochemical impedance spectroscopy (EIS) and polarization techniques, showing the corrosion resistance of Ni–P–SiO2 diminished after heat treatment. The results showed that in the coating with 12.5 g/L SiO2, the coating hardness enhanced from 453VH to 980 VH before and after heat treatment. Furthermore, the wear behavior of the coating was analyzed before and after heat treatment  

    Corrosion behavior and microhardness of Ni-P-SiO2-Al2O3 nano-composite coatings on magnesium alloy

    , Article Journal of Materials Engineering and Performance ; Volume 26, Issue 5 , 2017 , Pages 2032-2039 ; 10599495 (ISSN) Sadreddini, S ; Rahemi Ardakani, S ; Rassaee, H ; Sharif University of Technology
    Springer New York LLC  2017
    Abstract
    In the present work, nano-composites of Ni-P-SiO2-Al2O3 were coated on AZ91HP magnesium alloy. The surface morphology of the nano-composite coating was studied by field emission scanning electron microscopy (FESEM). The amount of SiO2 in the coating was determined by energy-dispersive analysis of x-ray (EDX), and the crystalline structure of the coating was examined by x-ray diffractometer (XRD). All the experiments concerning the corrosion behavior of the coating carried out in 3.5 wt.% NaCl solution and evaluated by electrochemical impedance spectroscopy (EIS) and polarization technique. The results showed that an incorporation of SiO2 and Al2O3 in Ni-P coating at the SiO2 concentration of... 

    Characterization of Ni-P-SiO2-Al2O3 nano-composite coatings on aluminum substrate

    , Article Materials Chemistry and Physics ; Volume 189 , 2017 , Pages 207-214 ; 02540584 (ISSN) Rahemi Ardakani, S ; Afshar, A ; Sadreddini, S ; Ghanbari, A. A ; Sharif University of Technology
    Elsevier Ltd  2017
    Abstract
    In the present work, nano-composites of Ni-P-SiO2-Al2O3 were coated on a 6061 aluminum substrate. The surface morphology of the nano-composite coating was studied by field emission scanning electron microscopy (FESEM). The amount of SiO2 in the coating was determined by Energy Dispersive Analysis of X-Ray (EDX) and the crystalline structure of the coating was examined by X-ray diffractometer (XRD). All the experiments concerning the corrosion behavior of the coating carried out in 3.5%wt NaCl solution and evaluated by electrochemical impedance spectroscopy (EIS) and polarization technique. The results showed that an incorporation of SiO2 and Al2O3 in Ni-P coating at the SiO2 concentration of... 

    Corrosion resistance and photocatalytic activity evaluation of electrophoretically deposited TiO 2 -rGO nanocomposite on 316L stainless steel substrate

    , Article Ceramics International ; Volume 45, Issue 11 , 2019 , Pages 13747-13760 ; 02728842 (ISSN) Azadeh, M ; Parvizy, S ; Afshar, A ; Sharif University of Technology
    Elsevier Ltd  2019
    Abstract
    TiO 2 -rGO nanocomposite coatings were obtained by electrophoretic deposition (EPD) technique of TiO 2 nanoparticles and graphene oxide (GO) on stainless steel substrate. First, GO particles were synthesized using a modified Hummers' method. GO was reduced electrochemically to form a coating in the presence of nano-sized TiO 2 particles. The influences of different parameters such as GO concentration, coupling co-electro-deposition parameters (electrophoretic duration and voltage) on thickness, surface morphology and, corrosion behavior of the as-synthesized TiO 2 -rGO nanocomposite coatings were systematically surveyed. The morphology and microstructure were investigated by field emission...