Sharif Digital Repository

In the present paper, the fabrication and characterisation of typical high temperature Ni(Ti+ Hf) alloyed thin films produced by simultaneous sputter deposition from separate elemental Ni, Ti and Hf targets are presented. Film composition, determined by energy dispersive X-ray spectroscopy, was controlled by adjusting the ratio of powers applied to each target. Films deposited at room temperature had an amorphous structure and subsequent annealing at 550°C was carried out in a high vacuum environment, based on crystallisation temperature evaluation by differential scanning calorimetry (DSC). High temperature martensitic transformation, confirmed by DSC and variable temperature X-ray... 

Barrier properties of the biaxial oriented polypropylene (BOPP) films are the most important properties in food packaging industry. In this study different compatibilizers and materials were examined in order to find an appropriate blend composition to minimize the oxygen permeability of the films. It was observed that using organoclay and nanocomposits have positive effect on the oxygen permeability although the kind of compatibilizer is important. Through all evaluated materials the PVA (Poly(vinyl alcohol)) and MA (Maleic Anhydride) were the most successful selection for this goal. The BOPP film blended by PVA achieved the lowest oxygen transfer rate (300 cc 20 μm/m2 24 h atm) in compared... 

Thermoplastic starch (TPS), as a natural based polymer, is known to have the capability to be used in biological applications due to its biocompatibility and biodegradability. In this study, mechanical properties of TPS are enhanced by incorporating bioactive β-tricalcium phosphate (β-TCP) particles for bone tissue engineering applications. Starch-based nanocomposites containing 3, 5, and 10 wt% of β-TCP nanoparticles (TT3, TT5, TT10) were made using a co-rotating twin-screw extruder. Dynamic light scattering (DLS) and X-ray diffraction (XRD) techniques were employed to analyze the nanocomposites. Moreover, degradability, swelling degree, and biomineralization in a simulated body fluid (SBF)... 

While the photocatalytic degradation of various organic compounds under UV light irradiation has been widely investigated, visible-light-induced photocatalytic degradation of low levels of pollutants such as dibenzothiophene (DBT) is occasionally reported. In the present work, lanthanide/polyethylene glycol-modified TiO2 (La/PEG/TiO2) has been successfully synthesized by a sol-gel method. The photocatalyst was characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, UV-Vis diffusive reflectance spectroscopy, and energy dispersive X-ray analysis. Moreover, the photocatalytic degradation of DBT under visible light irradiation is... 

Readily prepared copper nanoparticles supported on CeO2 have been found to effectively catalyse the 1,3-dipolar cycloaddition (CuAAC) of a variety terminal alkynes and organic azides generated in situ from sodium azide and different organic halides furnishing the corresponding 1,2,3-triazoles in excellent yields. Cu nanoparticles supported on CeO2 have been characterized by X-ray diffraction analysis, energy dispersive X-ray analysis, scanning electron microscope and transmission electron microscope. The salient features of the present protocol are shorter reaction time, mild reaction conditions, reusability of the catalyst, and applicability to a wide range of substrates. © 2016 Elsevier... 

A new heterogeneous copper catalyst was synthesized by immobilization of copper ions onto magnetic nanoparticles with a new ligand based on triazole. The catalyst was characterized using scanning and transmission electron microscopies, atomic absorption and Fourier transform infrared spectroscopies, and thermogravimetric, elemental and energy-dispersive X-ray analyses. The results confirmed that a good level of organic groups was immobilized on the magnetic nanoparticles. Huisgen cycloaddition reaction was chosen as a model reaction for the investigation of catalyst activity under green conditions. Phenylacetylene and benzyl bromide derivatives were used for the synthesis of triazoles. The... 

A mechanochemical method was applied to prepare bismuth oxybromide (BiOBr) nanoplates using bismuth nitrate pentahydrate and potassium bromide for 15 (A15), 30 (A30) and 60 (A60) minutes. Scanning electron microscopy studies showed that all the products were comprised of nanoplates. Aggregated nanoplates along with microblocks were observed for A15 and A30 and the entire morphology was not homogenous. The morphology of A60 was uniform and consisted of thin and isolated nanoplates. Evaluation of the X-ray diffraction patterns showed that the purity and crystallinity of the products improved by increasing the milling time. The energy dispersive X-ray analysis confirmed the high purity of the... 

Vanadium supported on spinel cobalt ferrite nanoparticles was synthesized and characterized using Fourier transform infrared spectroscopy, X-ray diffraction, energy-dispersive X-ray analysis and transmission electron microscopy. For the first time, the prepared material was used for the catalytic degradation of methylene blue as an organic dye in the presence of hydrogen peroxide as a green oxidant and NaHCO3 as a co-reagent at room temperature. The dependency of removal percentage on various parameters such as amount of catalyst, pH, reaction time and temperature and the effect of radical scavenging agents were studied. Finally, recoverability and reusability of the vanadium supported on... 

Abstract: The effect of annealing temperature on the properties of silver thin films has been investigated. Ag thin films have been deposited on glass substrates by electron beam coating, afterward subjected to annealing in a mixed ambient of air and oxygen at 100, 200, 300, 400 and 500°C for 3 h and then cooled slowly. The crystallographic structures of the Ag thin films were studied as a function of the annealing temperature. X‑ray diffraction (XRD) was used to estimate the crystallographic texture and grain size. All the films were found to have crystalline structure. The film microstructures were studied by scanning electron microscopy (SEM). The XRD and SEM results confirmed the... 

The bidentate carboxamide ligand N-(thiazole-2-yl) picolinamide (LH) was synthesized in the environmentally friendly ionic liquid TBAB, and the five-coordinated CuII-complex, [Cu(L)2(H2O)].CHCl3 (1) was synthesized from LH and copper(II)acetate. Cupric oxide [CuO] nanoparticles (2) have been prepared by the thermal decomposition of (1) as a new precursor at 600 °C for 3 h under air atmosphere. (1) was characterised using FT-IR spectroscopy, elemental analyses and its solid state structure was confirmed by single crystal X-ray diffraction. (2) were identified by FT-IR spectroscopy, X-ray powder diffraction, scanning electron microscopy, energy dispersive X-ray analysis and thermo-gravimetric... 

Mn-doped ZnO nanoparticles, Zn1−xMnxO, were synthesised by a polyethylene glycol (PEG) sol–gel method and the physicochemical properties of compounds were characterised by atomic absorption spectroscopy (AAS), energy-dispersive X-ray analysis, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The catalytic degradation of an organic dye, methylene blue (MB), in the presence of Zn1−xMnxO as the catalyst and hydrogen peroxide (H2O2) as the oxidant at room temperature in water has been studied. Effects of oxidant, catalyst amount, catalyst composition, pH value of the solution and an OH-radical... 

In this study, firstly, a double-reservoir and switchable prototype of a micro-chip along with the respective holders were fabricated. A cyclic desorption process using microliter volume of organic solvent was adopted to prevent any outdoor contamination. As extractive phases, two identical sheets of electrospun polyamide/polypyrrole/titania nanofibers were synthesized using core–shell electro-spinning technique and utilized for determination of memantine in plasma samples. Field emission scanning electron microscopy images showed a high degree of porosity and homogeneity throughout the sheet structure. Also, energy dispersive X-ray analysis confirmed the presence of titania, while the... 

In this study, a low–cost microfluidic device from polymethyl methacrylate was fabricated by laser engraving technique. The device is consisted of a central chip unit with an aligned microchannel. Both sides of the engraved microchannel were sandwiched by two synthesized sheets from polyamide/titania (PA/TiO2) hollow nanofibers as extractive phases. The inlet and outlet of the device were connected to the polyether ether ketone tubes, while a peristaltic pump was used to deliver both sample and desorbing solvent through the microchannel. The recorded scanning electron microscopy images from the surface of the synthesized PA/TiO2 nanofibers, exhibit a good degree of homogeneity and porosity...