Loading...
Search for: epoxy-coating
0.005 seconds

    Cathodic Protection of Underground Pipeline by Polyurethane Coating

    , M.Sc. Thesis Sharif University of Technology Rajabpour, Foroud (Author) ; Dolati, Abolghasem (Supervisor)
    Abstract
    Selection of appropriate coating system is the most important subject in corrosion control of buried pipelines. Corrosion control of buried pipelines is achieved by using a combination of barrier coatings and cathodic protection (CP). Applying barrier coating can decrease the protection current of CP. However, at the coating holidays the pipeline act as cathode generating hydroxyl ion and hydrogen electrochemically. Therefore the selected coating should be compatible with the alkaline condition.This research focuses on evaluating of an epoxy-tar and a urethane-tar based coating. Coatings performance has been tested by accelerated corrosion test methods (i.e. Salt spray according to ASTM... 

    Synthesis and Characterization of Anticorrosive Hybrid Epoxy Coating based on Polyaniline/Nanodiamond Nanostructures

    , M.Sc. Thesis Sharif University of Technology Mohammadkhani, Rahman (Author) ; Shojaei, Akbar (Supervisor) ; Pirhady, Nahid (Co-Advisor)
    Abstract
    One of the ways that corrosion control is presented is the use of coatings that have good properties such as high adhesion, impact resistance, ultraviolet radiation, and so on. They also have other unique properties like anti-corrosion property. To achieve coatings with these advanced properties, they use special properties of nanocomposites. Nanocomposites can add or improve one or more properties to coating properties.In the present study, we tried to first synthesize NanoDiamond/Polyaniline hybrid nanoparticles in different percentages and then use this hybrid in epoxy ester coating. To characterize this hybrid, various analyzes such as FE-SEM, TEM, FT-IR, UV-Visible, TGA and XRD were... 

    Synthesis and Application of Carbon Hollow Nanospheres Containing Active Film Forming Agents for Fabrication of Self-Healing Epoxy Resin

    , Ph.D. Dissertation Sharif University of Technology Haddadi, Arash (Author) ; Ramazani, Ahmad (Supervisor) ; Mahdavian, Mohammad (Supervisor) ; Taheri, Peyman (Co-Supervisor) ; Mol, Arian (Co-Supervisor)
    Abstract
    Nowadays, self-healing process, repairing minor damages automatically without the need for detection or any type of manual intervention, becomes a hot topic of general interest. In this research, the effect of addition of carbon nanocontainers doped with film forming epoxy and polyamine agents in various contents on the self-healing properties of epoxy resin was investigated. Carbon nanocontainers were synthesized via the silica templating method and carbonization of polysaccharide shells at the high temperature. Loading of the film forming agents into carbon nanocontainers was performed using vacuum jar method in the presence of epoxy/acetone and polyamine/acetone dilute solutions.... 

    Synthesis and Investigation of Properties of Intumescent Fireproofing Paint with Oxide Nanoparticles

    , M.Sc. Thesis Sharif University of Technology Hasannezhad, Asghar (Author) ; Dolati, Abolghasem (Supervisor)
    Abstract
    Intumescent paints are coatings designed for passive fire protection of steel and other materials. In this research, the performance of water-based intumescent coating with vinyl acetate resin for cellulose fire conditions and epoxy-based coatings for hydrocarbon fire conditions has been investigated. The fire resistance of coatings was evaluated according to the ASTM E119 standard for water-based coating and UL1709 standard for epoxy-based intumescent coating. For the water-based intumescent coating, the expansion of char was investigated in a furnace with a temperature of 800°C for 1 hour. Thermal decomposition was studied by thermogravimetric analysis (TGA). Also, flammability was... 

    Designing a dual-functional epoxy composite system with self-healing/barrier anti-corrosion performance using graphene oxide nano-scale platforms decorated with zinc doped-conductive polypyrrole nanoparticles with great environmental stability and non-toxicity

    , Article Chemical Engineering Journal ; Volume 382 , 15 February , 2020 Mohammadkhani, R ; Ramezanzadeh, M ; Saadatmandi, S ; Ramezanzadeh, B ; Sharif University of Technology
    Elsevier B.V  2020
    Abstract
    Designing a novel epoxy composite system with dual self-healing/barrier anti-corrosion functions using graphene oxide (GO) nano-platforms decorated by polypyrrole (PPy) nanoparticles doped with zinc metal ions is the major objective of this research attempt. GO-PPy-Zn nanoplatform was fabricated via one-pot polymerization of pyrrole monomers on GO and two direct/indirect methods of zinc doping. In order to verify the PPy nanoparticles synthesis on GO sheets several analyses such as UV–visible, XPS, HR-TEM and FE-SEM were performed. The epoxy nanocomposite coatings containing GO-PPy and GO-PPy-Zn nanoplatforms were fabricated and applied on carbon steel. The nanocomposite coatings... 

    Epoxy nanocomposite coatings with enhanced dual active/barrier behavior containing graphene-based carbon hollow spheres as corrosion inhibitor nanoreservoirs

    , Article Corrosion Science ; Volume 185 , 2021 ; 0010938X (ISSN) Haddadi, S. A ; Ramazani Saadatabadi, A ; Mahdavian, M ; Arjmand, M ; Sharif University of Technology
    Elsevier Ltd  2021
    Abstract
    Graphene-based carbon hollow spheres (CHSs) fabrication, doped with 2-mercaptobenzimidazole (MBI) was successfully done in previous work. The active/barrier corrosion protection performance (CPP) of epoxy coatings was evaluated using salt spray test, electrochemical impedance spectroscopy (EIS), and scanning vibrating electrode technique (SVET). Results proved the active/barrier CPP enhancement of epoxy coatings in the presence of 3 wt. % MBI@CHSs. While the presence of MBI and empty CHSs in epoxy coatings did not further improve the active performance. An improvement in the adhesion loss of the epoxy coating, ca. 58 %, was observed in the presence of 3 wt. % MBI@CHSs. © 2021  

    Nanodiamond loaded with corrosion inhibitor as efficient nanocarrier to improve anticorrosion behavior of epoxy coating

    , Article Journal of Industrial and Engineering Chemistry ; Volume 83 , 2020 , Pages 153-163 Rahmani, P ; Shojaei, A ; Pirhady Tavandashti, N ; Sharif University of Technology
    Korean Society of Industrial Engineering Chemistry  2020
    Abstract
    In the present study, thermally oxidized nanodiamond (OND) was first modified non-covalently with dodecylamine (DDA) as corrosion inhibitor. In this respect, reactive primary amine of DDA molecule with high isoelectric point (IEP) could interact easily with negative charge carboxylic acid groups of OND. Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) proved that OND nanoparticle was successfully functionalized by DDA up to approximately 5 wt% grafting contnet. Both OND and dodecylamine modified OND (DND) were loaded in epoxy (EP)/polyamine hardener matrix at the same concentration of 1 wt% and applied on mild steel substrate. Morphology of EP-DND and... 

    Synthesis of methyltriethoxysilane-modified calcium zinc phosphate nanopigments toward epoxy nanocomposite coatings: Exploring rheological, mechanical, and anti-corrosion properties

    , Article Progress in Organic Coatings ; Volume 171 , 2022 ; 03009440 (ISSN) Haddadi, S. A ; Alibakhshi, E ; Labani Motlagh, A ; Ramazani S. A., A ; Ghaderi, M ; Ramezanzadeh, B ; Mahdavian, M ; Arjmand, M ; Sharif University of Technology
    Elsevier B.V  2022
    Abstract
    In this study, the effects of unmodified calcium zinc phosphate (UCZP) and modified calcium zinc phosphate (MCZP) nanopigments (NPs) on the rheological, mechanical, and corrosion protection performance (CPP) of the epoxy (EP) coatings were investigated. Transmission electron microscopy (TEM) coupled with energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were used to study morphology and overall chemical structure of synthesized calcium zinc phosphate (CZP) NPs, respectively. The grafting of methyltriethoxysilane (MTES) molecules on the surface of CZP was assessed using Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and... 

    Production of New Nanocomposites for Neutron and Gamma Shielding and Modeling of the Attenuation Phenomena Using Computational Methods

    , M.Sc. Thesis Sharif University of Technology Safavi, Mohammad Reza (Author) ; Outokesh, Mohammad (Supervisor) ; Vosoughi, Naser (Supervisor) ; Kiani, Mohammad Amin (Co-Supervisor)
    Abstract
    If nuclear radiation is not weakened and absorbed, it can cause serious damage to human devices or the environment. Dual-purpose dry casks are one of the sources of nuclear radiation production as a place to keep the spent fuel assemblies. One of the ways to protect against them is to use shield. One of the most common of them is composite shield. The composite used in this study has a polymer matrix. The matrix of the used polymer is epoxy resin. In this study, two separate composites have been made to attenuate neutron and gamma radiation. In this thesis, first, by using the MCNPX code, the necessary simulations for the design and construction of composite shields have been carried out.... 

    Synergistic inhibition effect of zinc acetylacetonate and benzothiazole in epoxy coating on the corrosion of mild steel

    , Article Journal of Materials Engineering and Performance ; Volume 24, Issue 6 , 2015 , Pages 2464-2472 ; 10599495 (ISSN) Amoozadeh, S. M ; Mahdavian, M ; Sharif University of Technology
    Springer New York LLC  2015
    Abstract
    The corrosion inhibition effect of zinc acetylacetonate (ZAA) and benzothiazole (BTH) mixture was evaluated for mild steel in 3.5% NaCl solution. To this end, ZAA:BTH mixtures ranged from 6:1 to 1:6 mol ratios were examined by weight loss and open circuit potential to obtain optimal mole ratio. The optimal mixture of ZAA:BTH at 1:5 mol ratio showed a significant corrosion inhibition efficiency proved by electrochemical impedance spectroscopy and polarization studies. The addition of the optimal mixture of ZAA:BTH to epoxy coating showed a considerable increase of corrosion protection evaluated by salt spray exposure  

    Evaluation of the corrosion protection properties of an epoxy coating containing sol-gel surface modified nano-zirconia on mild steel

    , Article RSC Advances ; Volume 5, Issue 36 , Mar , 2015 , Pages 28769-28777 ; 20462069 (ISSN) Haddadi, S. A ; Mahdavian, M ; Karimi, E ; Sharif University of Technology
    Royal Society of Chemistry  2015
    Abstract
    In this study, the effect of surface modified nano-zirconia (nano-ZrO2) on the corrosion protection of epoxy coating on mild steel was investigated. An organosilane (trimethoxy methyl silane) was used as a surface modifier to improve the dispersability of the inorganic nanoparticles in the organic coating matrix. Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were used to characterize the sol-gel surface modified nanoparticles. The dispersability of the modified and unmodified nano-zirconia in an epoxy coating was examined by field emission-scanning electron microscopy (FE-SEM). Electrochemical impedance spectroscopy (EIS) and salt spray were employed to... 

    PH-Sensitive polydopamine–La (III) complex decorated on carbon nanofiber toward on-demand release functioning of epoxy anti-corrosion coating

    , Article Langmuir ; Volume 38, Issue 38 , 2022 , Pages 11707-11723 ; 07437463 (ISSN) Ghaderi, M ; Saadatabadi, A. R ; Mahdavian, M ; Haddadi, S. A ; Sharif University of Technology
    American Chemical Society  2022
    Abstract
    The high aspect ratio and unique thermal and electrical characteristics of carbon nanofiber (CNF) made it an ideal physical barrier against the penetration of corrosive ions. However, the poor compatibility of the CNF with the polymer matrix and the lack of active corrosion inhibitors are the key limitations of this nanomaterial, resulting in short-term anti-corrosion resistance. An intelligent self-healing epoxy (EP) coating, including CNF modified with a polydopamine (PDA)-La3+ complex, was successfully fabricated to overcome these issues. Electrochemical impedance spectroscopy (EIS) evaluation implied that mild steel (MS) submerged in a 3.5 wt % NaCl solution containing the CNF-PDA-La...