Sharif Digital Repository

Suspension flow has an important role in various applications such as paint, material and pharmaceutical industries. Settling is considered as a resisting phenomenon in the processes dealing with suspensions. Using nanoparticles as an additive to micro-particulates has been studied in limited studies. This work presents an experimental investigation to assess the effectiveness of nanoparticles in reduction of suspension settling. Microscopic imaging and transmission measurement were used to analyze the stability factors in a container. Transmission analysis revealed that presence of nanoparticles in the suspension, decreased the sedimentation rate. Microscopy showed that the settling rate... 

Acoustically excited lean premixed low-swirl flames were experimentally investigated to gain a better understanding of detrimental thermoacoustic couplings which can occur in applications like low-NOx gas turbines. Propane-air flames were imaged and analyzed at equivalence ratios of 0.6 to 0.8, mean flow velocities of 3.5 to 5.5 m/s and excitation frequencies of 135 Hz to 555 Hz. It was observed that with increasing excitation frequency, mean flame shape gradually became wider up to a Strouhal number of about 2.5 and then slowly reverted back to the unexcited flame shape. Such large changes in mean flame shape and possibly flow field under acoustic excitations can significantly affect flame... 

The main objective of this study is to predict the deformation behavior, strain localization, and forming limits of ferrite-pearlite steels by incorporating the contributions of the microstructural characteristics and mechanical properties of the underlying microstructure. A realistic microstructure-based micromechanical approach in the framework of the crystal plasticity (CP) model was carried out using the periodic representative volume element (RVE) generated from the scanning electron microscopy (SEM) image. The homogenized stress–strain curve of the realistic RVE was validated with the experimental data with an error of less than 6.71% at large strains. Afterward, the initial...