Loading...
Search for: fall-time
0.011 seconds

    A Marx-based generator with adjustable FWHM using a controllable magnetic switch

    , Article IEEE Transactions on Dielectrics and Electrical Insulation ; Volume 26, Issue 2 , 2019 , Pages 324-331 ; 10709878 (ISSN) Naghibi Nasab, J ; Hadizade, A ; Mohsenzade, S ; Zarghany, M ; Kaboli, S ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2019
    Abstract
    The lack of turn-off ability makes the spark gap-based Marx generator uncontrollable in terminating the output pulse. In addition, there are some limitations for rise time and voltage gain improvements in the conventional critically-damped Marx design. In this paper, an efficient over-damped design of Marx circuit is proposed, which leads to a shorter rise time as well as a larger voltage gain. A chopping magnetic switch is employed to achieve the desired values of the fall time and full width at half maximum (FWHM). Moreover, adding a DC bias circuit to the magnetic switch provides the ability to adjust the pulse FWHM parameter. Therefore, an output pulse with a shorter rise time, larger... 

    Eye diagram parameter extraction of nano scale VLSI interconnects

    , Article 2012 IEEE 21st Conference on Electrical Performance of Electronic Packaging and Systems, EPEPS 2012 ; 2012 , Pages 327-330 ; 9781467325394 (ISBN) Mehri, M ; Sarvari, R ; Seydolhosseini, A ; Sharif University of Technology
    2012
    Abstract
    In this paper, jitter due to both capacitive and inductive coupling is studied. Maximum frequency of driving signal on a wire is limited by its input rise time, fall time, pulse width, and the coupling effect from its neighbors. The analytical expressions to estimate the deterministic jitter time due to these effects are presented. The estimation is based on the fastest and slowest approximation of the signal waveform components. Also, we have extracted the eye opening parameters of the eye diagram. The inductance effects significance is shown on eye opening and jitter time. The 45nm technology is used for estimating the horizontal and vertical eye opening and jitter time. The presented...