Search for: feasibility-studies
0.007 seconds
Total 76 records

    Feasibility Study Of A Gas To Liquid Plant

    , M.Sc. Thesis Sharif University of Technology Vahidian, Somayeh (Author) ; Hooshmand, Mahmoud (Supervisor)
    The methodology proposed by UNIDO , to investigate feasibility study of industrial project, is a useful tool in pre-investment decision making. In this work feasibility of investing on "Gas To Liquid" GTL Plant of Asalouye is investigated. Having gathered required information, including gas field potential, required technology and machineries, cost of investments , required manpower to run the UNIDO methodology is used to investigate the investment, the result of the work shows that the project is feasible and it would have internal rate of return of 24% ( by sale cost= 81 $ per barrel of GTL product)  

    Fkomein Cement Factory Feasibility Study

    , M.Sc. Thesis Sharif University of Technology Namei, Ashkan (Author) ; Safaieh, Mohammad Reza (Supervisor)
    Cement, as the basis of industrial development, plays a magnificent role in construction of residential buildings, storage dam projects, industrial factories, roads, agricultural projects, airports, power plants, … In this thesis, the feasibility study of Khomein cement factory has been accomplished. The amount of production assumed as 1 million tons per year. The construction period assumed as 3 years and we suppose that the production plan takes 80 percent of full capacity in the first year, 90 percent in the second year and finally it takes the full capacity in the third year of production. The needed capital has been estimated as 1530 billion Rials and the working capital has been... 

    Feasibility Study of WIMAX in Access Network

    , M.Sc. Thesis Sharif University of Technology Hatami, Parastou (Author) ; Safaieh, Mohammad Reza (Supervisor)
    Nowadays in Iran service providers, are using copper lines in access networks. They rent these lines from a governmental telecommunication company during a complicated and time consuming process. In this thesis, the most common access technologies have been analyzed in order to find an alternative solution for copper lines. Based on the studies in this thesis, it is clear that Wimax technology can be an appropriate solution comparing with Wi-Fi and 3G from the point of quality and speed. The UNIDO methodology has been used in this economical assessment (feasibility study). In this methodology, all the running and fixed costs and revenue as well, have been estimated. In the next step,... 

    Loss Reduction Feasibility Study in Distribution Network

    , M.Sc. Thesis Sharif University of Technology Fazeli, Faezeh (Author) ; Safaieh, Mohammad Reza (Supervisor)
    Regarding complexity and wide range use of distribution network structures, loss reduction is possible in case of complete knowledge and suitable approaches. Loss reduction not only can grow GDP but also can improve economic growth. It should have schedule and plan wisely. Thus, in this research, first a region called Yusef Abad in Tehran was selected then the network was assessed completely. During the assessment, the research team determines causes of energy loss and load loss and then measured amount of each one. Then, the loss share of each element of the network determined. Elements of the network consist of transformers, conductors and meters. Then possible solutions for loss reduction... 

    Feasibility Study for Establishment of a Casing Pipe Threading Plant in IRAN Oil Industry Via UNIDO Approach

    , M.Sc. Thesis Sharif University of Technology Afarin, Amir Hesam (Author) ; Mostafavi, Mostafa (Supervisor)
    Regarding high importance of casing pipes in oil industry also considering that they have not been producing domestically (with specific features), the main object of this research is feasibility study of establishment of a casing pipe threading plant which produces such kind of pipes. Usage of Casing PipesIs defining as a separator between wall of oil well and its core. The operation starts with driving and fixing a casing pipe to the oil well to avoid its collapsing during excavation process , then next casing pipes will be driven to the well and will be fixed to the previous pipes. During current research, after gathering all related financial and technical data, evaluation of “Net... 

    Feasibility And Study(CNG Cylinder Production Plant)

    , M.Sc. Thesis Sharif University of Technology Mousavi, Mohammad (Author) ; Haji, Alireza (Supervisor)
    Nowadays best using of fossil fuels sources of the country (and) importance of comparison against lack of capacity in petrol production make determined the programmers and the directors to foresee and design expanded programs of the goals, to use natural gas for car fuels. To reach fulfillment of these programs, the confirmed needs of the natural gas cylinders are improved and make it essential to invest on producing compressive natural gas cylinders. In this way economical and technical change researches has been done in order to construct on department to produce 200,000 compressive natural gas cylinders in a year during two sets.(shifts) According to the results of technical researches... 

    Feasibility Study Production Dupblex Cardboard from Wastes Paper

    , M.Sc. Thesis Sharif University of Technology Bohlouli, Dariush (Author) ; Safaieh, Mohammad Reza (Supervisor)
    This thesis is a research in the technology for paper production from waste paper (non – wood fibers ) , then feasibility study a economical justification for setting up a factory for producing duplex board , with technical and financial study has been performed inaccordance to UNIDO Standard . In packing industries with a capacity 7500 tons per year and the raw material for this process is waste paper. In this thesis paper pulp that needs for board production can be implemented by solving waste paper in the water. This method therefore pollution free and does not have any negative effects on the environment even a considerable amount of water which is extracted from the pulp, istreatment... 

    Symbiosis opportunities between food and energy system: The potential of manure-based biogas as heating source for greenhouse production

    , Article Journal of Industrial Ecology ; Volume 25, Issue 3 , 2021 , Pages 648-662 ; 10881980 (ISSN) Burg, V ; Golzar, F ; Bowman, G ; Hellweg, S ; Roshandel, R ; Sharif University of Technology
    John Wiley and Sons Inc  2021
    The concept of symbiosis, a mutually beneficial relationship, can be applied to food and energy systems. Greenhouse systems and biogas plants are interesting technologies for food–energy symbiosis, because both are usually based in rural areas and offer opportunities for the exchange of materials (e.g., biomass waste from the greenhouse as input to biogas plants) and energy (heat from biogas co-generation for heating greenhouses). In this paper, the focus lies on manure resources for biogas in Switzerland, because manure amounts are high and currently largely underused. We provide a spatial analysis of the availability of manure as feedstock to biogas plants and heat source for greenhouses.... 

    Feasibility Study of a Production Plant for Prefabricated Components of Building Structures

    , M.Sc. Thesis Sharif University of Technology Rafat, Mohammad Reza (Author) ; Mostafavi, Mostafa (Supervisor)
    According to authorities and statistical figures, Iran is seriously facing insufficient housing crisis. Studies show that through an increase of 1.5 million units in annual housing construction capacity, this crisis will be overcome in 5 years. Although successful execution of such a big project is not unprecedented in the world, housing experts believe fulfillment of this plan through traditional method of construction in the country is impossible. The country's capacity of industrialized construction which is known as the remedy, is only limited to 2-3% of total construction. Thus development of this approach through financial, legal, ... supports of investment in prefabrication... 

    The Feasibility Study of Micronized Powder Plant for Exporting (UNIDO METOD)

    , M.Sc. Thesis Sharif University of Technology (Author) ; Hooshmand, Mahmoud (Supervisor)
    This thesis deals with the development of a hypothetical micronized powder factory and trying to test and engage in this hypothetical development of the following plant, it considers following factors:
    1-Domestic & International market
    2-Plant location
    3-Plant design & development
    b.technology & equipment
    c.human resource
    4-raw material
    5-shipping & transport
    To evaluate above factors the UNIDO methodology is used in this research work. The UNIDO methods are using a process by which feasibility studies of production facilities or plant are base on. After reviewing a variety of factors, ranging from financial... 

    Dairy Products Distribution Cost Analysis

    , M.Sc. Thesis Sharif University of Technology Alirezaei Shahraki, Karim (Author) ; Ghasemi Tari, Farhad (Supervisor)
    Distribution network is a part of the country’s economic that its structure is affected by economic evolutions. Improper operation and irrational structure of distribution system increases the price of goods and services and creates discontent and makes unreasonable expectations in producers and consumers. In addition, it causes severe fluctuations of price, loses of resources, lack of clarity, reduction of purchasing power, turmoil in market operation, and creation of unofficial distribution networks in society. This investigation focuses on analysis of distribution part of dairy products and tends to evaluate prices and presents solutions to reform prices of distribution. This research... 

    Hybrid Powertrain Design For Urban Utility Vehicles

    , M.Sc. Thesis Sharif University of Technology Taghavipour, Amir (Author) ; Saadat Foumani, Mahmoud (Supervisor)
    The present research aims at designing a hybrid powertrain for the urban utility vehicles whose internal combustion engines consume more fuel due to idling during most of the time of their mission in the cities. This design has considered development of a hybrid powertrain with the least changes in the vehicle together with a simultaneous lower cost. At first some experiments were conducted to examine the feasibility of using the hybrid powertrain for the urban utility vehicles. One of the results of this test was the speed of these vehicles in different times of working and we can achieved a standard drive cycle though separate methods by analyzing this result. The drive cycle is one of the... 

    Ship Scrap Yard Feasibility Study

    , M.Sc. Thesis Sharif University of Technology Momeni, Alireza (Author) ; Safaeie, Mohammad Reza (Supervisor)
    It seems that ship scraping industries is a part of economic of under developing countries because in this business the amount of investment and cost is little but benefit is high.Also it can be assume as an important part of marine and supplier for steel industries. The owners of ships and oil carriers save their money by scrapping the aged ships and renewing their marine transportation vehicles and the other benefit is reducing the environmental pollution. This business creating a large amount of job opportunity for workers, for environmental view it could be found that by scrapping the ships and producing scrap steel “which is the most important output of these factories” the mineral work... 

    Feasibility Study of Painting Line by Electro Deposition in Zagrosskhodro

    , M.Sc. Thesis Sharif University of Technology Fakouri, Hojjatollah (Author) ; Hooshmand, Mahmoud (Supervisor)
    Assurance about projects and industrial plans success always had been one of the most important concerns of investors. Car manufacturing industry is not excluded. In this project the painting line in zagrosskhodro company using electro deposition method is reviewed , analyzed, and investment feasibility study of such method is investigated . All aspect of investment including financial and economic aspect is reviewed by UNIDO methodology.
    The outcome is described here briefly.
    1- Production volume in this plan in complete capacity is equal to 40000 bodies in a year.
    2- The primary fixed investment capital is 132,187,912,140 Rls.
    3- Sum of fixed expenses of production is ... 

    Feasibility study of Information Technology for medical university of Sabzevar

    , M.Sc. Thesis Sharif University of Technology Shahabipour, Ali (Author) ; Mostafavi, Mostafa (Supervisor)
    Statistics is an essential part of decision making and management in all organizations if the needed information is correct and updated. Due to lack of suitable information systems, it needs rework and spend extra time to gather information. Information Technology is used to summarize organizational information. It supports management of organization to make decision for strategic planning, tactical planning and operational programming by creation, storage, retrieve and distribute correct information to managers. For implementing these systems, there are many solutions. Selecting each one depends on conditions and potentials. Implementing integrated systems is expensive task therefore large... 

    Super Heavy Crude Oil Refinery Project Feasibility Study

    , M.Sc. Thesis Sharif University of Technology Mansouri, Gholam Reza (Author) ; Safaeih, Mohammad Reza (Supervisor)
    The market demand of super heavy crude oil is very low due to its determinative both physical and chemical properties. Unfortunately existing refineries in Iran are not capable to refine this kind of crude oil. Marketing issues besides great price difference with other crude oil types leads us to find economical solution for optimal use of this national possession. About 70 percent of super heavy crude oil produced from Soroush and Norouz oil fields is un-refineable materials and to refine this heavy crude oil to refinery products like gasoline or gas oil a refinery with RFCC ( Residual Fluid Catalitic Cracking) technology must be made. Super high Technology and very heavy capital cost... 

    Improving the technology of West Regional Electricity Company within Technical and Engineering Dimensions in Accordance with Evaluating Long-Term Technical,Economic, and Social Benefits

    , M.Sc. Thesis Sharif University of Technology Moradi, Parviz (Author) ; Ghasemi Tari, Farhad (Supervisor)
    The aim of the present research is to examine improving the technology in terms of technical and engineering dimensions and also assessing their long-term economic & social advantages. The population of the research consists of top managers, middle managers and technical experts working in power plants situated in the west of Iran (Kermanshah, Kurdistan and Ilam). According to the research aims, this research is a practical survey trying to explore a model consistent with the subject of research, i.e. improving the condition of technology in electronics industry. The utilized instrument in this research is a questionnaire with a reliability level equal to (α = 0.754.) The validity and... 

    Feasibility Study of Manufacturing of Disposable Plant Containers

    , M.Sc. Thesis Sharif University of Technology Hosseini Vala, Hamid (Author) ; Mostafavi, Mostafa (Supervisor)
    The aim of the present research is to analyse feasibility study of manufacturing the disposable (Biodegradable) plant containers in Iran. The population of the research consists of the whole capacity for manufacturing this product and the similar product producers which have been registered in the Ministry of Industry, Mines and Commerce. First, in this research, the environmental and anti-environmental impacts of non-plant Disposable Containers like: plastic, foam, paper and aluminum have been discussed and also their disadvantages have been examined to be compared with advantages of using plant Disposable Containers. Thereafter, collecting the required data about today society and market,... 

    Feasibility Study of RFID Application for Items Tracking and Identification in Chain Stores

    , M.Sc. Thesis Sharif University of Technology Ebrahimi, Samaneh (Author) ; Akbari Jokar, Mohammad Reza (Supervisor)
    Today, using Radio Frequency Identification (RFID) technology is of a remarkable interest to the industry and services sectors. Application of this technology could result in higher levels of productivity and effectiveness. On the other hand, department stores are increasing in number and size in the country. Application of RFID technology could play an undeniable role in both reducing the time each customer must spend in order to complete their purchase, and accelerating the logistics operations of these stores.
    Through literature review, this research studies application of RFID technology instead of other identification technologies such as Bar-Code, reveals strengths and weaknesses... 

    Joint Modelling of Telecommuting’s Feasibility and Freguency for Employees, Application of Copula Models

    , M.Sc. Thesis Sharif University of Technology Kamal, Kimia (Author) ; Kermanshah, Mohammad (Supervisor)
    Since expansion of communication technology, telecommuting has gained attention from transportation planners as an approach in field of demand management. In this research, joint effects of feasibility of telecommuting for the employees of each organization and the relevant frequency of employees have been evaluated by using the copula model as the most recent conventional way of developing a joint model since the last few years. The result of telecommuting acceptance is that after presenting the project to each organization, the head employer measures the appropriateness of the project for employees and if he reaches a consensus on the success of the project, the employees get involved and...