Sharif Digital Repository

SFDTD was first introduced as modified Finite Difference Time Domain method by Aminian et al in [1]. They used this method to calculate the TE reflection coefficient for grounded slab and also for periodic array of metallic patches. Later Aminian et al used SFDTD for bandwidth determination of soft and hard ground planes [2] and for determination of permittivity of metamaterials [3]. Yunfei Mao et al also used SFDTD for Solving Oblique incident wave on other kind of patches array [4]  

Passive localisation of non-cooperative targets through their electromagnetic emissions is an attractive issue. This localisation task can be carried out using multitude of receiver sites being linked together. This multiplicity, however, brings about difficulties in organising and coordinating the sites. One can even claim that the method is no longer passive considering the necessary communication links between the sites. On the other hand, single-site localisation methods basically overcome these difficulties eliminating the need for inter-site communications. In this study, a single-site localisation method is presented and analysed. This method is applicable to scenarios with a large... 

Bluetooth headsets are one of the popular accessories of mobile phones because of their convenience. It is necessary to assess the impact of electromagnetic waves on the human head when a person is using a headset. In this paper different scenarios closely modeling the situations that a subject may use the headset in real life are simulated. Simulations are performed for two types of materials commonly used to manufacture the headsets, namely silicone and acetal, and for two different orientation angle of the headset on the ear. Specific Absorption Rate (SAR) and path loss values are then obtained for two different environments, the open space and inside a car. SEMCAD-X software is used as a... 

Many standards are not considering Specific Absorption Rate (SAR) measurements with the use of mobile headsets.In this paper a simulation of mobile headset effects on a human head is done using FDTD-based platform, SEMCAD-X software.We designed two headset models with different case materials to observe their interaction with a Specific Anthropomorphic Mannequin (SAM) phantom as a human head model.Both headset models are installed in the left ear and the human head is rotated by 30±.As headset communicates via Bluetooth at the frequency of 2.4 GHz, we chose a suitable planar inverted F antenna (PIFA) to use with both the headset models.Spatial peak SAR values averaged over 1 g and 10 g for... 

The three-dimensional split-field finite-difference time-domain (SF-FDTD) method is combined with the totalfield- scattered-field method for injecting a plane wave. A formulation is derived for calculating the incidence transformed fields of SF-FDTD on a one-dimensional auxiliary grid. The resulting fields obtained in the scattered zone are used to calculate the far fields, based on a proposed fully time-domain near-to-far-field transformation. The far-field information is used to calculate the extinction cross section of the periodic structure under oblique incidence. To analyze metallic periodic structures, a formulation with a reduced number of variables is proposed based on the auxiliary... 

A novel approach for phototherapy is proposed. The proposed method is based on cell apoptosis according to halting activation of cancer cell membrane receptor by exposure to UV light pulses without any side effect. In the proposed method, gold nanoparticles are directed to cancerous cells by conjugating their surface with specific ligands. UV light is created locally adjacent to cells around the gold nanoparticles. UV light is generated due to nonlinear interaction of visible light with gold nanoparticles because of enhancement in third order nonlinear effects. For example, by using 780 nm laser, 260 nm UV will be generated around the nanoparticle because of third harmonic generation... 

A simple approach is extended for the simulation of Kerr-nonlinear and/or dispersive media through the finite-difference time-domain method. The scheme is able to include different types of linear and nonlinear dispersion in a single and unified formulation. It also provides a method for the simulation of nonlinear dispersive media in such a way that saving time is possible. Also, a new simple technique is presented for the implementation of sources having arbitrary profiles and arbitrary radiation angles. The technique is particularly suited for easy modeling of unidirectional sources like Gaussian beams  

Subradiant modes can exhibit sharper spectral response, and lower radiative loss compared to the super-radiant modes of plasmonic nanostructures. Selective excitation of these modes is challenging, and has practical importance. In this paper, a systematic procedure for determining, and individually exciting the subradiant modes of a plasmonic nanostructure is presented by utilizing our previously reported T-matrix formulation. As an example, we calculate various modes of a gold nanodimer, and determine the incident field required for exciting a subradiant mode of this nanostructure. This field is then generated by a modified zone plate lens. The expansion of scattered field, as well as the... 

An inverted organic solar cell (IOSC) with nanograting array as anode of the cell has been simulated and analyzed using a combined electrical and optical approach. We have used finite difference time domain (FDTD) method for optimizing device structure. We have compared the characteristics of the IOSC with grating structure with a reference IOSC without grating structure. As a result, an improvement of 11% and 26% in power conversion efficiency (PCE) and short circuit current (JSC) compared to the reference structure was achieved. An analysis is provided on the origin of reduced fill factor (FF) in the IOSC with grating structure. We also have discussed about disadvantage of using optical... 

In this paper, it is shown that non-reciprocity can be observed in time-varying media without employing spatiotemporal modulated permittivities. We show that by using only two one-dimensional Fabry–Perot slabs with time-periodic permittivities having quadrature-phase difference, it is possible to achieve considerable non-reciprocity in transmission at the incidence frequency. To analyze such a scenario, generalized transfer matrices are introduced to find the wave amplitudes of all harmonics in all space. The results are verified by in-house finite-difference time-domain simulations. Moreover, in order to have a simple model of such time-varying slab resonators, a time-perturbed coupled-mode... 

Through using a three-dimensional finitedifference time-domain (3D-FDTD) scheme, we analyze nonlinear self-focusing in air as a Kerr medium. For sufficiently intense laser beams, the gaseous medium can behave as a strong positive lens which tends to focus the beam. Our simulations' major focus is on the propagation characteristics of an intense continuous-wave laser beam. Necessary relations have been introduced into the conventional FDTD formulation to account for the nonlinear behavior of air. The results clearly indicate that sufficient amounts of optical intensity may lead to self-focusing immediately in front of the laser aperture. ©2008 IEEE  

A rigorous, fast and efficient method is proposed for analytical extraction of guided defect modes in two-dimensional photonic crystals, where each Bloch spatial harmonic is expanded in terms of Hermite-Gauss functions. This expansion, after being substituted in Maxwell's equations, is analytically projected in the Hilbert space spanned by the Hermite-Gauss basis functions, and then a new set of first order coupled linear ordinary differential equations with non-constant coefficients is obtained. This set of equations is solved by employing successive differential transfer matrices, whereupon defect modes, i.e. the guided modes propagating in the straight line-defect photonic crystal... 

An approximate and accurate enough multi-conductor transmission line model is developed for analysis of side-coupled metal-insulator-metal (MIM) waveguides. MIM waveguides have been already modeled by single conductor transmission lines. Here, the side coupling effects that exist between neighboring plasmonic structures are taken into account by finding appropriate values for distributed mutual inductance and mutual capacitance between every two neighboring conductors in the conventional single-conductor transmission line models. In this manner, multi-conductor transmission line models are introduced. Closed-form expressions are given for the transmission and reflection of miscellaneous MIM... 

A coupled transmission line model whose parameters are analytically given is provided for fast and accurate analysis of miscellaneous plasmonic structures with metal-dielectric-metal (MDM) arrangement. The coupling of surface plasmons supported by the planar metal-dielectric interfaces is included in the proposed model and thereby the effects of the first non-principal mode of the MDM waveguide are considered. In particular, MDM bends, junctions, and stubs are studied. Using rigorous numerical solutions, e.g., the finite-element method and the finite-difference time-domain, it is shown that the proposed model is accurate in all those cases  

It has been proposed that emission spectrum of random lasers with magnetically active semiconductor constituents can be made tunable by external magnetic fields. By employing the FDTD method, the spectral intensity and spatial distribution of electric field are calculated in the presence of an external magnetic field. It is numerically shown that due to the magneto-optical Voigt effect, the emission spectrum of a semiconductor-based random laser can be made tunable by adjusting the external magnetic field. The effect of magnetic field on the localization length of the laser modes is investigated. It is also shown that the spatial distribution of electric field exhibited remarkable... 

Time-dependent model is presented to simulate random lasers in the presence of an inhomogeneous gain medium. PbSe quantum dots (QDs) with an arbitrary size distribution are treated as an inhomogeneous gain medium. By introducing inhomogeneity of the PbSe QDs in polarization, rate, and Maxwell's equations, our model is constructed for a one-dimensional disordered system. By employing the finite difference time-domain method, the governing equations are numerically solved and lasing spectra and spatial distribution of the electric field are calculated. The effect of increasing the pumping rate on the laser characteristics is investigated. The results show that the number of lasing modes and... 

We substitute different types of photonic crystal waveguide components by approximate transmission line circuits. The proposed distributed circuits exploit the analogy of wave propagation in photonic crystal waveguides and transmission lines. They are either cascaded to each other or inserted like stubs to imitate wave propagation within the photonic structure. Notable examples, e.g. coupled waveguide-cavity systems, sharp 90° bends, and T-junctions, are studied in detail. It is shown that analysis of the proposed circuits here can yield accurate enough results and thus substitute the brute-force numerical methods. The privilege of having analytical models is exploited to improve the... 

A transmission line model is developed for coupled plasmonic metal-insulator-metal (MIM) waveguides. In the proposed model coupling between electric fields of two plasmonic waveguides is modeled by distributed mutual capacitor while distributed mutual inductor accounts for magnetic field coupling. These mutual elements are determined using propagation constants of supermodes of coupled waveguides. The model is applied to analyze coupled line directional coupler and side-coupled rectangular resonators. The effectiveness of the model is assessed using fully numerical finite-difference time-domain (FDTD) technique. The results have excellent agreement with the numerical methods  

We theoretically demonstrate the tunabiltiy of terahertz random lasers composed of high temperature superconductor YBCO and ruby layers as active medium. The considered system is a one-dimensional disordered medium made of ruby grain and YBCO. Finite-difference time domain method is used to calculate the emission spectrum and spatial distribution of electric field at different temperatures. Our numerical results reveal that the superconductor based random lasers exhibit large temperature tunability in the terahertz domain. The emission spectrum is significantly temperature dependent, the number of lasing modes and their intensities increase with decreasing temperature. Also, we make some... 

We propose that spectral intensity of superconductor based random lasers can be made tunable by changing temperature. The two fluid model and wavelength dependent dispersion formula have been employed to describe the optical response of the superconducting materials. Random laser characteristics have been calculated using the one dimensional FDTD method. Our simulation results reveal that the emission spectrum can be manipulated through the ambient temperature of the system. It is observed that transition from metal phase to pure superconducting phase leads to the enhancement of the laser emission. Furthermore, spatial distribution of the fields in one dimensional disordered media is very...