Sharif Digital Repository

Gravity, viscous, and capillary are three main forces affecting flow characteristics in porous media. No analytical solution can be found to model the flow by considering all these forces. In this work, by considering all these forces, the polymer-flooding process is modeled by using a numerical simulation approach. For characterizing the polymer, the modified Blake-Kozeny model is chosen, which benefits consideration of the permeability reduction due to polymer adsorption on the rock surface  

Several types of research are performed on flow control and this fact highlights the importance of this topic. Over the last two decades, actuators based on acoustic waves have attracted much attention and have been used in widespread applications from mixing to pumping. This paper reveals the effects of some control parameters such as wave amplitude and wave frequency on the dynamical behavior of a sessile drop in order to change the flow characteristics. For this purpose, the removal of water from surfaces and drop movement against gravity are considered. Flow dynamics is simulated using lattice Boltzmann method. The results show that the drop can be removed from the surface in a short... 

Flow hydrodynamics of laminar falling film of aqueous Li Br solution (Li Br - H2O) on a horizontal elliptical tube has been investigated in this research. The film velocity distribution and film thickness, namely, the flow characteristics are determined by solving analytically simultaneous simplified Navier - Stokes equations and continuity equation in polar and Cartesian coordinates. The analysis is based on steady state laminar flow of falling liquid film of Li Br - H2O on a horizontal elliptical tube in polar model and Cartesian model (CM), for cases in which traction on the film surface is considered negligible. Models are compared with each other in three cases of aspect ratios (Ar),... 

Knowledge of Air-water two phase flows is significant to different engineering systems such as chemical reactors and power plant and petrochemical and petroleum industry. One of the most industrial cases of two phase flow is two phase flow in vertical large pipes. In this paper in order to find two phase flow behavior along vertical large diameter pipes we simulate air inlets with different number of holes and different hole diameters in the same flow rate of air. In addition, flow characteristics such as cross-sectional void fraction and velocity and pressure were considered. To achieve this aim, main equations of flow have been developed for investigation of flow behavior in air-water two... 

An experimental investigation has been carried out to verify characteristics of pressure fluctuations inside a circular, horizontal and inclined pipeline (90mm inside diameter and 10 m long) carrying two-phase air-water flow in a controlled manner (operating at room temperature and normal pressure). The pressure fluctuation was considered to be due to interaction between the fluid and air bubble compressibility in the pipe. The fluctuating pressure was studied in detail while the flow pattern was mainly slug, wavy or stratified flow. The tests were carried out varying with time, space, water flow rate/air flow rate ratio and pipe inclination. The pressure fluctuations were measured... 

The low swirl flow is a novel method for stabilizing lean premixed combustion to achieve low emissions of nitrogen oxides. Understanding the characteristics of low swirl flows is of both practical and fundamental interest. In this paper, in order to gain better insight into low swirl stabilized combustion, large eddy simulation and dynamically thickened flame combustion modeling are used to characterize various features of non-reacting and reacting low swirl flows including vortex breakdown, shear layers’ instability, and coherent structures. Furthermore, four test cases with different equivalence ratios are studied to evaluate the effects of equivalence ratio on the flame and flow... 

The performance of a gas centrifuge that is used for isotopes separation is dependent on the gas flow inside it. In this study, for modeling the UF6 gas flow, an Implicit Coupled Density-Based (ICDB) solver, was developed in OpenFOAM. To validate the ICDB solver, the gas flow within the rotor in total reflux state was compared with the analytical solution obtained by Onsager model and the numerical solution obtained by the Fluent software. The results showed that the ICDB solver had acceptable accuracy and validity. Also the computational efficiency of Roe, AUSM (Advection Upstream Splitting Method) and AUSM+ up schemes were compared. The results showed AUSM+ up scheme is efficient. Then,... 

Do all the clayey soils have the same behavior in terms of the generation and dissipation of excess pore water pressure during the piezocone penetration process? To find the answer, a coupled numerical simulation of CPTu in clays based on finite element analysis is presented in this paper. In this regard, the numerical modeling is verified by some laboratory tests on the samples with known initial conditions and stress states as well as field measurements of piezocone testing. Generation of excess pore water pressure during the penetration process is then investigated at different locations around the cone. This study encompasses piezocone penetration in both normally consolidated and... 

New standpoint of turbulent coolant jets into crossflow, which have numerous applications in traditional and modern technology, especially in gas turbine blades, is presented in this work. It is more than half a century that, many researchers have been studying jet into cross flow to understand its behavior and to predict and control it better. Previous studies indicate that, the main attentions had been on: a- geometrical parameters such as: inclined and compound jet angles, hole's shape, jet's array arrangements, jet's spacing, and jet's channel depth, b- flow characteristics like: blowing ratio, density ratio, jet and cross flow Reynolds numbers, and turbulence intensity. Here, we have...