Sharif Digital Repository

The influence of variable fluid properties on mixed electroosmotic and pressure driven flow of non-Newtonian fluids is investigated in this paper. The non-linear coupled energy and momentum equations are solved by means of an iterative numerical approach. The results reveal that the temperature dependent effects only become significant at very high values of the Debye-Hückel parameter in case of combined electroosmotic and pressure driven flow and could safely be neglected in other cases. It is observed that the physical properties variation lead to a higher mean velocity in case of pressure assisted flow and a lower mean velocity in case of pressure opposed flow. Furthermore, the... 

Purpose: Spiral-wound heat exchangers (SWHEs) are widely used in different industries. In special applications, such as cryogenic (HEs), fluid properties may significantly depend on fluid temperature. This paper aims to present an analytical method for design and rating of SWHEs considering variable fluid properties with consistent shell geometry and single-phase fluid. Design/methodology/approach: To consider variations of fluid properties, the HE is divided into identical segments, and the fluid properties are assumed to be constant in each segment. Validation of the analytical method is accomplished by using three-dimensional numerical simulation with shear stress transport k-ω model, and... 

Purpose: Spiral-wound heat exchangers (SWHEs) are widely used in different industries. In special applications, such as cryogenic (HEs), fluid properties may significantly depend on fluid temperature. This paper aims to present an analytical method for design and rating of SWHEs considering variable fluid properties with consistent shell geometry and single-phase fluid. Design/methodology/approach: To consider variations of fluid properties, the HE is divided into identical segments, and the fluid properties are assumed to be constant in each segment. Validation of the analytical method is accomplished by using three-dimensional numerical simulation with shear stress transport k-ω model, and... 

Oil production from asphaltenic oil reservoirs has always encountered difficulties, such as plugging and unpredictable fluid properties. To physically recognize the aspects of asphaltene deposition, several dynamic and static asphaltene deposition tests were designed and performed on one of the giant south Iranian oil reservoirs using dead and live crude oil and real core samples. Moreover, the effects of fluid velocity on the extent of damage were investigated. It was found that surface deposition of asphaltene particles is the main source of formation damages in the porous media and the resulting permeability impairment obeys an exponential behavior. All of the experiments confirm that... 

The purpose of this study is to carry out a numerical investigation of injection type EHD pumps. To this end, the flow is considered laminar, steady and incompressible flow. The flow model is based on the assumptions that the fluid is Newtonian and the fluid properties are constant. The results show that all of the ions emitted from emitter are not collected by next collector electrode, but some of this injected ions move to the previous one, which causes back flow. Although this back flow is smaller than net pumping flow but it would reduce the net flow. Because of existence of this back flow, finding the optimum distance of electrodes from each other is necessary. This study shows that... 

This study presents a comprehensive investigation on hydrodynamic and thermal transport properties of mixed electroosmotically and pressure driven flow in microtubes. Particular emphasis is given to investigating the combined consequences of viscous dissipation, non-uniform Joule heating, and variable thermophysical properties. Analytical solutions are obtained using the Debye-Hückel linearization and constant fluid properties assumption, while a numerical solution is presented for variable fluid properties and non-uniform distribution of Joule heating. The results indicate that, viscous heating effect is pronounced significantly when a favorable pressure gradient exists and cannot be... 

A depleted naturally fractured gas condensate reservoir with extremely tight matrix permeability in the center of Iran is used for gas storage. Due to the tightness of the matrix, simulation of this process may present a unique challenge in terms of the importance of diffusion process in flow behavior of the injected gas in matrix blocks. This article presents a multimechanistic (Darcian-type flow and Fickian-type flow) mathematical model to investigate the importance of diffusion process as a function of important rock and fluid parameters. The authors' approach consists of the following steps: (a) development of a 1-D governing equations for a single matrix block consists of a gas... 

We study the natural convection heat transfer in a tilted square cavity with different tilt angles. The cavity is subject to a high gradient temperature resulting in high Rayleigh number flows. The fluid is air and is treated as an ideal gas. The flow is laminar. The fluid properties change with temperature variation using Sutherland's law. Because of imposing large temperature gradients to the two cavity opposite walls, there is substantial density variation in the domain. We use a novel non-Boussinesq algorithm to model the density variation fully. Therefore, the current results are considerably different from those obtained using the classical Boussinesq-based methods, which replace the... 

Compact heat exchangers are among the vital components used in various industries. In this study, a general framework has been developed with a multi-scale point of view for three-dimensional simulation of multi-stream plate-fin heat exchangers. The most important features in the MSPFHEs simulation, such as phase change phenomena, multi-component mixtures, multiple streams, transversal, lateral and longitudinal conduction, non-uniformity of inlet flow, variable fluid properties, and heat leakage are simultaneously considered in this model. The modular form of the model structure has facilitated layer-by-layer simulation of cross flow heat exchangers as well as parallel flow ones. Our model... 

Decision on the location of new wells through infill drilling projects is a complex problem that depends on the reservoir rock and fluid properties, well and surface facilities specifications, and economic measures. Conventional approach to address this is a direct optimization that uses the numerical flow simulation. However, this is computationally very extensive. In this study the authors use a hybrid genetic algorithm (HGA) optimization technique based on the genetic algorithm (GA) with helper functions based on the polytope algorithm and the neural network. This hybridization introduces hill-climbing into the stochastic search and makes use of proxies created and calibrated iteratively... 

Decision on the location of new wells through infill drilling projects is a complex problem that depends on the reservoir rock and fluid properties, well and surface facilities specifications, and economic measures. Conventional approach to address this is a direct optimization that uses the numerical flow simulation. However, this is computationally very extensive. In this study the authors use a hybrid genetic algorithm (HGA) optimization technique based on the genetic algorithm (GA) with helper functions based on the polytope algorithm and the neural network. This hybridization introduces hill-climbing into the stochastic search and makes use of proxies created and calibrated iteratively... 

Applying upscaling techniques is an undeniable demand in reservoir simulation, considering the difference between level of details in a geological model and level of details that can be handled by reservoir simulators. Upscaling reservoir model involves first constructing a coarse grid by employing gridding algorithms and then computing average properties for coarse grid blocks. Although various techniques have been proposed for each of these steps, one has to be aware of strengths and weaknesses of each technique before attempting to apply them. In this paper, we focus on different gridding methods and evaluate their performances. Three main grid generation techniques are considered:...