Sharif Digital Repository

The effects of different nano-SiO2 contents on the rheological properties of poly(vinylidene fluoride) (PVDF) solution and mechanical, thermal, structural, and piezoelectric properties of composite nanofibers were investigated. Results showed an increase in fiber diameter (∼125 to 350 nm) and ∼450% increase in tensile strength as the content of nano-SiO2 particles increased. The degree of crystallinity decreased by 19% as the nano-SiO2 content increased by 2% (w/w). Further investigation demonstrated that silica could significantly improve the piezoelectric properties of PVDF nanofibers as the output voltage showed an increase in the presence of silica attributed to change in the crystalline... 

Removal of fluoride ions was investigated using a new adsorbent of yttrium alginate biocomposite (YALG). Effect of various parameters such as pH, contact time, initial concentration of fluoride ions and temperature on the sorption capacity of adsorbent was studied. Performing a mathematical assessment of fluoride sorption, isotherm and kinetics models including Freundlich & Langmuir isotherms and pseudo first & second order kinetics were applied on experimental equilibrium results through this work. Isotherm analysis revealed that Langmuir model showed a better evaluation from sorption equilibrium data than Freundlich. Based on kinetics evaluation, the pseudo second-order equation was... 

Samples of INCONEL 718 were levitated and melted in a slag by the application of an electromagnetic field. The effects of temperature, time, and slag composition on the inclusion content of the samples were studied thoroughly. Samples were compared with the original alloy to study the effect of the process on inclusions. Size, shape, and chemical composition of remaining non-metallic inclusions were investigated. The samples were prepared by Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel (ASTM E 768-99) method and the results were reported by means of the Standard Test Methods for Determining the Inclusion Content of Steel (ASTM E 45-97).... 

Gold-catalyzed cyclization of 1,5-diynes with ketones as reagents and solvent provides diversely substituted vinyl ethers under mild conditions. The regioselectivity of such gold-catalyzed cyclizations is usually controlled by the scaffold of the diyne. Herein, we report the first solvent-controlled switching of regioselectivity from a 6-endo-dig- to 5-endo-dig-cyclization in these transformations, providing fulvene derivatives. With respect to the functional-group tolerance, aryl fluorides, chlorides, bromides, and ethers are tolerated. Furthermore, the mechanism and selectivity are put to scrutiny by experimental studies and a thermodynamic analysis of the product. Additionally,... 

Excess fluoride is one of the water pollutants in the world, which is removed from water by chemical methods to produce sludge. On the other hand, techniques such as R.O. (Reverse Osmosis) also have problems with power consumption and wastewater disposal. Metal-organic frameworks are one of the newest adsorbents used to separate anions. In this study, MOF1 ({[Zn3L3(BPE)1.5]·4.5DMF}n) was used to remove fluoride from the aqueous solution. The influence of various factors such as pH, contact time, adsorbent amount, and temperature on fluoride uptake was investigated. Based on the results, the MOF synthesized in acidic media absorbs more fluoride ions. The reaction time in the first 20 min had... 

Polyvinylidene fluoride magnetic nanocomposite films were prepared by solution casting using two types of magnetic nanoparticles: (a) magnetic nanoparticles synthesized by co-precipitation method using oleic acid as a coating agent and (b) Fe3O4 nanoparticles prepared by hydrolysis method without using a coating agent. Dynamic light scattering measurements showed mean diameters of 135 and 46 nm in co-precipitation and hydrolysis methods, respectively. Scanning electron microscopy showed that the magnetic nanoparticles were uniformly dispersed inside the polymer matrix. X-ray diffraction confirmed that Fe3O4 nanoparticles induced nucleation of β- crystalline phase in the matrix polymer. The... 

The performance of the magnesium fluoride/chromium/gold in-line fiber optic polarizer on the thickness of magnesium fluoride buffer layer and chromium metal thin film was theoretically investigated. To prove the theoretical study, the magnesium fluoride/chromium/gold polarizer was made based on the simulation results. The obtained polarizer showed an extinction ratio of about 40 dB which is in a good agreement with the theoretical result at the corresponding thicknesses. Both theoretical and experimental results showed that by covering the side polished single mode fiber with the optimum layer thicknesses, a novel and an efficient fiber polarizer with the high extinction ratio could be... 

A composite coating containing silver, fluoride and hydroxyapatite (Ag-FHA) was developed on titanium substrate by sol-gel method. Triethylphosphite, hydrated calcium nitrate, ammonium fluoride and silver nitrate were used respectively, as P, Ca, F and Ag precursors with a Ca:P ratio 1.67 and concentration of silver was 0.3 wt%. Coatings were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and atomic absorption spectrometry (AAS). Potentiodynamic polarization measurements in simulated body fluid proved corrosion protection caused by both Ag-FHA coatings. Antibacterial activity of coatings against... 

In the present study, the morphology of asymmetric poly(vinylidene fluoride) blend membranes which were prepared by the phase inversion method is rationalized by comparing two non-dimensional number represent thermodynamic and kinetic properties of the prepared membrane. These two parameters change phase diagram and demixing rate between solvent and nonsolvent. TiO2 nanoparticles and polyvinylpyrrolidone were used as additives. Hansen solubility parameters of the components are calculated by Van Krevelen method. Furthermore, kinetic and thermodynamic properties of the prepared solutions are determined by drawing phase diagrams and controlling mass transfer rate during precipitation of... 

This study aimed to investigate the changes in crystalline structure and resistance to demineralization of human dental surface enamel treated with erbium-doped yttrium aluminium garnet laser (Er:YAG) laser and fluoride. The enamel surfaces were divided into four groups according to the treatment process including, (L): irradiated with Er:YAG; (F): treated with acidulated phosphate fluoride gel (LF): Pre-irradiated surfaces with Er:YAG subjected to acidulated phosphate fluoride gel and (FL): laser irradiation was performed on the fluoridated enamel surface. Before and after the treatment procedure, the samples were evaluated using X-ray diffraction, scanning electron microscope (SEM) and the... 

In the present study, the structural features, corrosion behavior, and in vitro bioactivity of TiO 2 nanotubular arrays coated on Ti–6Al–4V (Ti64) alloy were investigated. For this reason, Ti64 plates were anodized in an ammonium fluoride electrolyte dissolved in a 90:10 ethylene glycol and water solvent mixture at room temperature under a constant potential of 60 V for 1 h. Subsequently, the anodized specimens were annealed in an argon gas furnace at 500 and 700 °C for 1.5 h with a heating and cooling rate of 5 °C min −1 . From XRD analysis and Raman spectroscopy, a highly crystalline anatase phase with tetragonal symmetry was formed from the thermally induced crystallization at 500 °C.... 

Electrospinning is an economical and alluring method to fabricate wound dressing mats from a variety of natural and synthetic materials. In this study, polyvinylidene fluoride (PVDF) and starch composite mats containing ciprofloxacin (CIP) loaded on titanium dioxide nanoparticles (TiO2) were prepared. Fourier Transform Infrared spectra of CIP, synthesized TiO2 NPs, TiO2/CIP, and PVDF/starch composite mats are analyzed. Scanning electron microscopy images revealed that the fiber diameter of PVDF nanofibers thickens by increasing starch, which varies between 180 nm and 550 nm. Strain at break of PVDF, starch, PVDF/starch (2:1 w:w; P2S1), PVDF/starch (1:1 w:w; P1S1), PVDF/starch (1:2 w:w;... 

The thin-film of hierarchical rutile/anatase TiO2 nanorod/nanoleafs on fluorine-doped tin oxide glass was prepared via a facile method. For this purpose, the hydrothermal method was used for the synthesis of rutile-phase nanorods on the TiO2 seeded FTO, and aqueous chemistry was applied for growing anatase-phase nanoleafs on the nanorods. The structural, morphological, and optical properties of coating characterized, and the thin-film utilized as the photoelectrode for dye-sensitized solar cell. The energy conversion efficiency of the newly developed nanostructure was higher than that of TiO2 nanorod thin-film by 40%. This increase could be ascribed to: (1) superior specific surface area... 

High-performance wearable electronic devices with the capability of converting mechanical force into electrical energy have been gaining increasing attention for biomedical monitoring applications. We present a novel wearable piezoelectric sensor based on a poly(vinylidene fluoride) (PVDF) nanofibrous membrane containing microporous zirconium-based metal-organic frameworks (MOFs) for arterial pulse monitoring. It is shown that the incorporation of 5 wt % of MOF greatly enhances the piezoelectric constant of the polymer fibrous mat by 3.4-fold without significant loss in its flexibility. The nanofibrous composite exhibits a peak-to-peak voltage of 600 mV under an applied force of 5 N, which... 

The UiO-66 NH2 and ZIF-8 metal organic framework nanoparticles (NMOFs) were incorporated into the polyvinylidene fluoride (PVDF) nanofibrous membrane. Then, the chitosan nanofibers were coated on the PVDF nanofibers to produce the PVDF/chitosan nanofibers. The performance of synthesized PVDF/NMOFs single layer and PVDF/chitosan/NMOFs two layers nanofibrous membranes was investigated for BSA protein molecules and Cr(VI) ions separation via ultrafiltration membrane process. The potential of synthesized nanofibers was also examined for BSA and Cr(VI) adsorption in a batch system. The characteristics of synthesized nanofibrous membranes were determined using SEM, EDX, TGA, BET, porosity and... 

Membrane separator based on the polyvinylidene fluoride (PVDF) is prepared via the non-solvent-induced phase separation (NIPS) method with water and ethanol as non-solvent and a mixture of dimethylformamide (DMF) and acetone as solvent. The effect of various acetone/DMF ratios and non-solvent material on the physical and electrochemical properties of the separator is studied by FE-SEM, tensile strength, electrochemical AC-impedance spectroscopy (EIS), thermal stability, and linear sweep voltammetry (LSV). The charge-discharge studies are carried out by fabricating a lithium foil/polymer electrolyte membrane/LiFePO4 cell. The results show that with the change of solvent and non-solvent, the... 

Carbonaceous radioactive waste is produced by adsorption of effluent gases of UF6 production line, on a bed of charcoal. Current research was aimed at developing a process for recovery of uranium from this waste in a laboratory and at pilot scale. As a first step, leaching of uranium from carbonaceous radioactive waste was undertaken by successive steps using Al(NO3)3 and nitric acid, the former used to eliminate corrosivity of the F− ions. The stoichiometry of reaction between F− and Al3+ ions form complexes ranging from AlF2+, AlF2+ to AlF3 depending upon their molar ratio. The results showed that the increase of NO3−/U ratio increased the uranium leaching efficiency. Presence of some... 

This study focuses on a forward looking approach in which deep eutectic solvents (DESs), a new class of designer solvents, were impregnated into micro porous polyvinylidene fluoride (PVDF) membrane for the separation of CO2 from CH4. Three types of DESs were prepared by mixing and heating of hydrogen bond acceptor (choline chloride) with either malic acid, tartaric acid or oxalic acid as hydrogen bond donor. The Fourier transform infrared spectroscopy confirmed the hydrogen bond interactions in the resulting DES. Thermal gravimetric analysis (TGA) was used to evaluate the thermal stability of the prepared membranes. The DES based supported liquid membranes were investigated systematically to... 

Stimulated devices are highly demanded for actuators and artificial muscles in the recent era but susceptible to low deformation at an applied voltage. In the present work, ionic liquids (ILs) based gel films were prepared from the polyvinyl chloride (PVC), dibutyl adipate (DBA), 1-butyl, 3-methimidazolium chloride, and 1-pentyl-3-methylimidazolium hexafluorophosphate by a simple solvent evaporation method. The structural, morphological, optical, and mechanical properties of the composite PVC/ILs gel were characterized by Fourier-transform infrared spectroscopy (FTIR), Large Angle X-ray scattering (LAXS), UV–visible (UV–vis) absorption spectroscopy, scanning electron micrpscopy (SEM) and... 

Stimulated devices are highly demanded for actuators and artificial muscles in the recent era but susceptible to low deformation at an applied voltage. In the present work, ionic liquids (ILs) based gel films were prepared from the polyvinyl chloride (PVC), dibutyl adipate (DBA), 1-butyl, 3-methimidazolium chloride, and 1-pentyl-3-methylimidazolium hexafluorophosphate by a simple solvent evaporation method. The structural, morphological, optical, and mechanical properties of the composite PVC/ILs gel were characterized by Fourier-transform infrared spectroscopy (FTIR), Large Angle X-ray scattering (LAXS), UV–visible (UV–vis) absorption spectroscopy, scanning electron micrpscopy (SEM) and...