Sharif Digital Repository

An experimental investigation has been conducted to clarify forced convection heat transfer characteristic and flow behavior of an isothermal cam shaped tube in cross flow. The range of angle of attack and Reynolds number based on an equivalent circular tube are within 0° < α < 180° and 1.5 × 104 < Reeq < 2.7 × 104, respectively. The results show that the mean heat transfer coefficient is a maximum at about α = 90° over the whole range of the Reynolds numbers. It is found that thermal hydraulic performance of the cam shaped tube is larger than that of a circular tube with the same surface area except for α = 90° and 120°. Furthermore, the effect of the diameter of the cam shaped tube upon... 

This paper simulates Al2O3-water nanofluid flow and forced convection around a rotating circular cylinder. The governing parameters are Reynolds number (1 ≤ Re ≤ 100), solid volume fraction of nanoparticles (0 ≤ φ ≤ 0.05) and non-dimensional rotation rate (0 ≤ α ≤ 3). The simulations are performed to study the effects of mentioned parameters on the heat transfer rate and fluid flow characteristics. The governing equations including the continuity, momentum, and energy equations are solved with a finite volume method. It is observed that the reduction of heat transfer with increase in rotation rate is in the vicinity of 6.9% and 32% for Re = 5 and 100, respectively at φ = 0.05. Furthermore,... 

In this paper, the effect of increasing the number of layers on improving the thermal performance of microchannel heat sinks is studied. In this way, both numerical and analytical methods are utilized. The analytical method is based on the porous medium assumption. Here, the modified Darcy equation and the energy balance equations are used. The method has led to an analytical expression presenting the average dimensionless temperature field in the multilayer microchannel heat sink. The effects of different parameters such as aspect ratio, porosity, channel width, and the solid properties on the thermal resistance are described. The results for single layer and multilayer heat sinks are... 

In this article, transient hydrodynamic and heat-transfer behavior of Newtonian fluid flow in vertical parallel-plate channels partially filled with a porous medium has been investigated numerically. In this regard, the influences of macroscopic local inertial term and the viscous heating due to the viscous dissipation were taken into account in the momentum equations of porous region and the thermal energy equations, respectively. Moreover, Forchheimer-Brinkman extended Darcy model was used to model fluid flow in the porous region. In addition, an analytical solution was obtained in the case of negligible Brinkman and Forchheimer number values at the steady-state conditions. The predicted... 

Nanofluid is the term applied to a suspension of solid, nanometer-sized particles in conventional fluids; the most prominent features of such fluids include enhanced heat characteristics, such as convective heat transfer coefficient, in comparison to the base fluid without considerable alterations in physical and chemical properties. In this study, nanofluids of aluminum oxide and copper oxide were prepared in ethylene glycol separately. The effect of forced convective heat transfer coefficient in turbulent flow was calculated using a double pipe and plate heat exchangers. Furthermore, we calculated the forced convective heat transfer coefficient of the nanofluids using theoretical... 

In this study, the effects of ferrofluids on the forced convective heat transfer in a tube with a round cross section under constant heat flux in the laminar flow regime are investigated experimentally. For this purpose, an experimental setup was designed and built. Furthermore, the effects of an external magnetic field on the forced convective heat transfer were examined for various Reynolds numbers and volume concentrations. The parameters of magnetic field strength, magnetic field arrangement, the constancy or oscillation of the magnetic field and also its oscillatory mode were examined. As a result of the experimental studies, in the absence of a magnetic field enhancement in convective... 

Forced convective of a nanofluid that consists of water and Al2O3 in horizontal tubes has been studied numerically. Computed results were validated with existing well established correlation. Two-phase Eulerian model has been implemented for the first time to study such a flow field. A single-phase model and two-phase mixture model formulations were also used for comparison. The comparison of calculated results with experimental values shows that the mixture model is more precise. It is illustrated that the single-phase model and the two-phase Eulerian model underestimates the Nusselt number. Effects of nanoparticles concentration on the thermal parameters are also discussed  

In this paper, the effects of both constant and alternating magnetic fields on the laminar forced convective heat transfer of a hybrid nanofluid containing tetramethylammonium hydroxide (TMAH) coated Fe3O4 nanoparticles and gum arabic (GA) coated carbon nanotubes (CNTs) flowing through a heated tube were investigated experimentally. The experiments were carried out over wide range of parameters such as Reynolds number (548-2190), volume concentrations of Fe3O4 (0.5-0.9%) and carbon nanotube (0.25-1.35%) nanoparticles, magnetic field strength (300-700 Gauss) and alternating magnetic field frequency (10-50 Hz). In present study, the experimental observations in the case without magnetic field... 

In this article, ferrohydrodynamic forced-convection heat transfer from a heated sphere embedded in a ferrofluid in the presence of the uniform external magnetic field has been studied numerically for the first time over a wide range of Reynolds number value, nanoparticle diameter, particle volume fraction, and magnetic field intensity. Despite the uniform external magnetic field applied, the internal magnetic field near the sphere could be nonuniform due to the considerable difference between the relative magnetic permeability of the sphere and the surrounding medium. Kelvin body force arises from this nonuniformity and induces vortexes near the sphere. These vortexes disturb the boundary... 

In this paper, the hydrodynamic and thermal behavior of a Fe3O4 ferrofluid flow was experimentally investigated inside a cupric u-shaped tube on a horizontal surface, under the effect of a variable magnetic field. The inlet flow regime was laminar and considered under the thermal boundary conditions of the tube with a uniform heat flux, which was affected by the variable magnetic field in some regions. The purpose of the study was to investigate the effect of parameters such as volume fraction of nanoparticles, Reynolds number of the flow, the radius of the curvature, and magnetic field frequency at three levels and four factors in the flow behavior in order to increase the convection heat... 

Microchannels are at the forefront of today's cooling technologies. They are widely being considered for cooling of electronic devices and in micro heat exchanger systems due to their ease of manufacture. One issue which arises in the use of microchannels is related to the small length scale of the channel or channel cross-section. In this work, the maximum heat transfer and the optimum geometry for a given pressure loss have been calculated for forced convective heat transfer in microchannels of various cross-section having finite volume for laminar flow conditions. Solutions are presented for 10 different channel cross sections: parallel plate channel, circular duct, rectangular channel,...