Sharif Digital Repository

Water flooding is being widely used in the petroleum industry and has been considered as a simple inexpensive secondary recovery method. But in fractured formations, existence of fracture system in reservoir rock induces an adverse effect on oil recovery by water flooding. Polymer flooding has been successfully applied as an alternative enhanced oil recovery method in fractured formations. But, the role of fracture geometrical properties on macroscopic efficiency of polymer flooding is not yet well-understood, especially in fractured five-spot systems. In this work five-spot glass micromodel, because of micro-visibility, ease of multiple experimentations and also presence of the unexplored... 

This work is concerned with the role of geometrical properties of fractures on oil displacement efficiency during solvent injection to heavy oil. Here, a series of solvent injection processes were conducted on one-quarter five-spot fractured micromodels that were initially saturated with the heavy oil, at a fixed flow rate condition. The oil recovery was measured using image analysis of the continuously provided pictures. The results show that for the range of experiments performed here, the maximum oil recovery happens at a fracture orientation angle of 45 degrees. Also, increasing the number of fractures leads to a higher oil recovery factor by solvent in 45 degrees, while it does not... 

In this work, coupled Cahn–Hilliard phase field and Navier–Stokes equations were solved using finite element method to address the effects of micro-fracture and its characterizations on water-oil displacements in a heterogeneous porous medium. Sensitivity studies at a wide range of viscosity ratios (M) and capillary numbers (Ca), and the resultant log Ca–log M stability phase diagram, revealed that in both media, with/without fracture, the three regimes of viscous fingering, capillary fingering and stable displacement similarly occur. However, presence of the fracture caused water channeling phenomenon which resulted in reduction of the number of active fingers and hence the final oil... 

Micromodel is small-scale artificial model of porous medium which is known as a novel approach for simulating flow and transport in porous media. For better understanding the effect of fracture geometrical properties on oil recovery efficiency, a series of first contact miscible solvent injection process were conducted on horizontal glass micromodels at several fixed flow rate conditions. The micromodels were initially saturated with the heavy crude oil. The produced oil as a function of injected volume of solvents was measured using image analysis of the provided pictures. The concentration calibration curves of solvents in heavy crude oil were used for evaluating the solvents...