Sharif Digital Repository

Cyclic voltammetry, j-t transients and transient time measurements have been used to characterize the Au-Ni alloy deposition and to obtain the nucleation and growth mechanism. The electrodeposition of gold, nickel and gold-nickel alloys was studied in cyanide-citrate electrolytes. The analysis of the voltammograms and j-t transients clearly shows that deposition of the Au and hence, of Au-Ni alloys, is affected by adsorbed cyanide ligands mainly at low overpotentials and a direct reduction occurs at high overpotentials. In this case, the Au deposition is kinetically favored, while the Ni deposition is controlled by the cyanide-citrate adsorbed adlayer. In an alloy electrolyte, the Au and Ni... 

A novel approach for highly sensitive detection of captopril was developed based on the fluorescence resonance energy transfer (FRET) between gold nanoparticles (Au NPs) and fluorescein isothiocyanate (FITC), in which FITC acts as the donor and Au NPs as the acceptor. The fluorescence intensity of fluorescein isothiocyanate (FITC) was strictly quenched as a result of noncovalently adsorbed on Au NPs. Upon the addition of captopril, the fluorescence intensity of FITC turn-on due to the competition between captopril and FITC towards the surface of Au NPs. Under the optimum conditions, the fluorescence intensity of the released FITC displays a linear relationship in the range of 20 μg L-1 to... 

Nowadays, achievement to easy, fast, reliable and cost-effective techniques and tools is one of the most important challenges in detection of microorganisms. Salmonella typhimurium is one of the most important pathogenic bacteria that affect the human health and environmental infections. In this work we report a new, stable, biocompatible and cost-effective platform for construction of an aptasensor based on nanoporous gold (NPG) for detection of S. typhimurium. Nanoporous gold is electrochemically synthesized using Au-Cu alloy at the surface of Au/GCE. Thiol functionalized aptamer is used for effective linking to the surface of NPG/Au/GCE via self-assemble monolayers (SAMs) formation.... 

We have studied formation of Au-Ag alloy nanoparticles in sputtered SiO 2 thin films. Silica thin films containing Au-Ag nanoparticles were deposited on quartz substrates using rf reactive magnetron co-sputtering technique. The films heat-treated in reducing Ar + H 2 atmosphere at different temperatures. They were analyzed by using UV-vis spectrophotometry, atomic force microscopy and X-ray photoelectron spectroscopy (XPS) methods for their optical, surface morphological as well as structural and chemical properties. The optical absorption of the Au-Ag alloy nanoparticles illustrated one plasmon resonance absorption peak located at 450 nm between the absorption bands of pure Au and Ag... 

Kinetics of dissolution of silver present in precious metal scraps in HNO3 was studied in temperature range of 26-85°C. Dissolution rate of silver was much faster than that of copper at all temperatures. Effects of particle size, stirring speed, acid concentration and temperature on the rate of dissolving of silver were evaluated. Dissolution rate decreases with particle size and increases with temperature. Dissolving was accelerated with acid concentrations less than 10 mol/L, Concentrations greater than 10 mol/L resulted in slowing down of the dissolution rate. Shrinking core model with internal diffusion equation t/τ = 1 - 3 (1-x)2/3 + 2 (1-x) could be used to explain the mechanism of the... 

Metal nanoclusters can be synthesized in various sizes and shapes and are typically protected with ligands to stabilize them. These ligands can also be used to tune the plasmonic properties of the clusters as the absorption spectrum of a protected cluster can be significantly altered compared to the bare cluster. In this paper, we computationally investigate the influence of thiolate ligands on the plasmonic intensity for silver, gold and alloy clusters. Using time-dependent density functional theory with tight-binding approximations, TD-DFT+TB, we show that this level of theory can reproduce the broad experimental spectra of Au144(SR)60 and Ag53Au91(SR)60 (R = CH3) compounds with... 

Co-deposition of RF-sputtering and RF-PECVD from acetylene gas and Au target were used to prepare sensor chip of gold nanoparticles (Au NPs). Deposition conditions were optimized to reach a Localized Surface Plasmon Resonance (LSPR) sensor chip of Au NPs with particle size less than 10 nm. The RF power was set at 180 W and the initial gas pressure was set at 0.035 mbar. Transmission Electron Microscopy (TEM) images and Atomic Force Microscopy (AFM) data were used to investigate particles size and surface morphology of LSPR sensor chip. The Au and C content of the LSPR sensor chip of Au NPs was obtained from X-ray photoelectron spectroscopy (XPS). The hydrogenated amorphous carbon (a-C:H)... 

This study describes spectrometric monitored kinetic processes to determine the size of citrate-capped Au nanoparticles (Au NPs) based on aggregation induced by L-cysteine (L-Cys) as a molecular linker. The Au NPs association process is thoroughly dependent on pH, concentration and size of nanoparticles. Size dependency of aggregation inspirits to determine the average diameters of Au NPs. For this aim the procedure is achieved in aqueous medium at pH 7 (phosphate buffer), and multivariate data including kinetic spectra of Au NPs are collected during aggregation process. Subsequently partial least squares (PLS) modeling is carried out analyzing the obtained data. The model is built on the... 

We report herein the development of a highly sensitive colorimetric method for the determination of cysteine and glutathione, based on aggregation of the citrate capped gold nanoparticles (Au NPs). This was exploited from high affinity of low-molecular-weight aminothiols towards the Au NPs surface, which could induce displacement of the citrate shell by the thiolate shell of target molecules, resulting in aggregation of the NPs through intermolecular electrostatic interaction or hydrogen-bonding. As a result of aggregation, which can be affected by the ionic strength, pH and concentration of Au NPs, the plasmon band at around 521 nm decreases gradually, along with formation of a new red... 

Gold nanoparticles (Au NPs) were synthesized by co-deposition of RF-sputtering and RF-PECVD from acetylene gas and Au target on the carbon nanotubes (CNTs). The CNTs were prepared by thermal chemical vapor deposition (TCVD) and Pd nanoparticles catalyst. TEM image shows that high-density and uniform distribution of Au NPs were grown on the CNTs. XRD analysis indicates that Au NPs have fcc crystal structure and CNTs have a good graphite structure. Raman spectroscopy results suggest that our sample includes double-walled CNTs. It is resulted that intensity of D-band reduces and G-band intensity raises and radial breathing mode (RBM) is changed by immobilizing of Au NPs on the CNTs. Raman... 

This paper reports a simple, low-cost, and effective electrochemical technique for sensing and reducing CrVI based on a Au-Pd bimetallic nanoparticle (BNP)-decorated indium tin oxide (ITO) conducting glass electrode. It was observed that the Au-Pd BNP-decorated ITO electrode could significantly boost the electrochemical reduction of CrVI when compared with either Au nanoparticle- or Pd nanoparticle-decorated ITO electrodes. These BNP-decorated electrodes exhibited a wide linear concentration range of 0.001-100 μM, a very low detection limit (signal-to-noise ratio = 3) of 0.3 nM, and a high sensitivity of 1.701 μA μM-1. From electrochemical impedance spectroscopy, it was revealed that this... 

Due to the high activity of Au nanoparticles (NPs) for various reactions, many researchers have tried to develop heterogeneous catalysts in order to prevent irreversible agglomeration of Au NPs. Herein, magnetic graphene oxide modified with polyaniline (PANI) was used as a support for Au NPs that brings together advantages including: uniform dispersal of the catalyst in water,alarge surface area related to the graphene oxide; easy electron transfer in chemical reactions and good attachment of Au NPs to the support associated with PANI; and finally facile recovery in the presence of a magnetic field. Catalytic reduction of different analytes (Congo red, methylene blue, rhodamine B and 4-nitro... 

A switchable dual light- and temperature-responsive drug carrier using gold nanoparticles (Au NPs)-grafted poly(dimethylacrylamide-co-acrylamide)/poly acrylic acid [P(DMA-co-AAm)/PAAc] hydrogel was prepared by free radical polymerization procedure using N,N-methylenebisacrylamide as cross-linker and ammonium persulfate as initiator. Initial P(DMA-co-AAm) hydrogel and uniformly-distributed stable Au NPs, prepared by reduction of hydrogen tetrachloroaureate (III) hydrate in the presence of trisodium citrate, were synthesized separately. Then, the prepared P(DMA-co-AAm) and Au NPs were added to an acrylic acid solution along with the cross-linker and initiator to prepare PAAc hydrogel within... 

In this study, two new composite membranes with antifouling and anti-biofouling properties were prepared through the modification of commercial polyamide (PA) discs using combination of in-situ polymerization of polyacrylic acid (PAA) and grafting of two synthesized bi-plasmonic Au-Ag and Ag-Au photocatalysts. The synthesis and characterization of the photocatalysts in batch mode were discussed in details as primary studies. Two intense 405-nm and 532-nm lasers for Ag-Au and Au-Ag photocatalysts, respectively and a solar-simulated xenon lamp for both photocatalysts were applied for photodegradation studies and the results were compared. In addition, the effect of other parameters such as... 

Enhancing stability against photocorrosion and improving photocurrent response are the main challenges toward the development of cupric oxide (CuO) based photocathodes for solar-driven hydrogen production. In this paper, stable and efficient CuO-photocathodes have been developed using in situ materials engineering and through gold-palladium (Au-Pd) nanoparticles deposition on the CuO surface. The CuO photocathode exhibits a photocurrent generation of ∼3 mA/cm2 at 0 V v/s RHE. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis and X-ray spectroscopy (XPS) confirm the formation of oxygen-rich (O-rich) CuO film which demonstrates a highly stable photocathode with retained...