Sharif Digital Repository

Liquefaction of gases is one of the applications of cryogenic science. Among the gases, Helium has the lowest boiling point, which at a pressure of 1atm is approximately 4.2K. Liquid helium can be used to cool superconductors in transportation equipment, military radars, and medical imaging equipment. For helium liquefaction, various cycles are used; these cycles have different parameters in their structure such as of input mass fraction to expanders, heat exchanger effectiveness, expander arrangement and ... which their analysis for improving the performance of the cycle is important. In this research, the aim is to study 2, 3 and 4 expander cycle with various parameters and structure. For... 

Thin film graphene oxide(GO) membranes have been promising potential for gas purification due to thin lamellar microstructure, stable a few atom thick layers and very short intersheet distances. In this research, the nanoporous graphene oxide membranes have been prepared by vacuum and pressurized ultrafiltration on the modified polyacrylonitryle(mPAN) sublayer for helium separation from Nitrogen and carbon dioxide gas mixture. The separation performance of synthesized GO membrane was controlled by varying parameters such as concentration of stabilized aqueous GO solution, pores size range of support and its surface properties, centrifuge time, applied pressure after synthesis, humidity,... 

There are numerous ways available to achieve low temperatures that cryocoolers might be among the most important of them. In the meantime, the pulse tube refrigerator has a special place due to its simple geometry and not be using any moving parts. This simple property make the pulse tube refrigerator one of the most popular methods to achieve low temperatures. Nowadays, a pulse tube refrigerator is used for cooling in the range of 4 to 123 Kelvin in two form of one-stage and two-stage and up to an approximate power of 1 KW. Today, due to the temperature and the amount of power required for cooling, as well as the time it takes to reach that temperature, this chiller is used in medical,... 

Heat exchangers are one of the most important components used in liquefaction cycles and overall efficiency of the cycle mainly depends on the heat exchangers effectiveness. It has been shown that the effectiveness of these equipments should be high enough to be able to liquefy a gas. Spiral heat exchangers are used frequently in cryogenic industry and specially in Helium liquefaction industry due to their specific characteristics, however according to literature review it turns out that little study is done in the field of simulation and geometrical parameter investigation of these kind of heat exchangers, so in this study the design and simulation of these cryogenics heat exchangers are... 

Helium gas is the working fluid in common Pulse Tube Refrigerators (PTRs) due to its brilliant properties in reaching cryogenics temperature as low as 4 K. Generally ideal gas equation of state has been used to evaluate thermodynamic performance of He. However using ideal gas equation of state for He in 10 bar and 5 K causes considerable error on estimation of density. The objective is to use real gas equation of state for temperatures near zero Kelvin. This approach makes an accurate prediction of PT cooling capacity and COP. In this thesis the objective is to realize the most relevant equations of state describing the proper behavior of He in the regions of operating point of PTR. Later on... 

Gas liquefaction is one of the main applications of Cryogenics science. Due to the unique properties of Helium, it is a strategic product in the world. Therefore, appropriate and applicable analysis should be used to investigate and optimize the Helium liquefaction cycles. In the current study, the goal is to find the optimal point with the help of energy and exergy analysis based on economic criterion, for the various parameters of Collins’ cycle. In order to simulate the cycle, a computer code is developed. First, sensitivity analysis of different parameters affecting the exergy efficiency and liquid fraction of the cycle has been done. Then, Artificial Neural Network and Genetic Algorithm... 

Helium is a valuable substance that is widely used in industry and medicine because of its unique properties. Due to the increasing demand for helium in the global market, several helium extraction units have been launched in the world in recent years; Nevertheless, there is still a significant gap between projected global helium production capacity and demand. Today, natural gas is known as the main source of helium on the earth. The method of industrial extraction of helium from natural gas is cryogenic. Due to the low temperature of this process, relatively high power consumption is used to extract helium from natural gas. Therefore, the optimization of this process is of great... 

Helium is known as a strategic material due to its unique properties and applications in the development of advanced industries. Currently, natural gas is the only source from which helium can be produced economically. The United States, Qatar, Algeria, and Russia have the largest share of helium production, respectively. In this research, the process of helium extraction from natural gas and its liquefaction, independent of LNG production based on helium in South Pars gas of Iran, which is the largest helium reservoir in the world, were designed and simulated.In the helium liquefaction section, the speed and accuracy of the process simulation were improved by developing a home code based on...