Sharif Digital Repository

Fuel Cell (FC) is one of the promising distributed generation resources which are based on renewable energies. Clean electricity generation, high efficiency and high energy density of the fuel cells make them attractive for lots of engineers. In this paper we discuss about the operational principles of fuel cell generally. Then, a circuit model of them will be introduced. Based on the model, we designed a novel DC/DC converter for supplying the fuel cell's load and simulated the design with using Matlab. The results say that its novel converter could conveniently supply the load and its needed power curve. ©2009 IEEE  

We introduce a clean cluster spin chain coupled to fully interacting spinless fermions, forming an unconstrained Z2 lattice gauge theory (LGT), which possesses dynamical proximity effect controlled by the entanglement structure of the initial state. We expand the machinery of interaction-driven localization to the realm of LGTs such that for any starting product state, the matter fields exhibit emergent statistical bubble localization, which is driven solely by the cluster interaction, having no topologically trivial noninteracting counterpart, and thus is of a pure dynamical many-body effect. In this vein, our proposed setting provides possibly the minimal model dropping all the... 

Developing advanced electrode materials with metal–organic frameworks (MOFs) has increasingly attracted attentions as an effective method for improving supercapacitors performances. However, their poor conductivity has limited their use in energy applications. In this paper, an effective strategy is presented to reduce the electric resistance of MOFs by the in situ synthesis of Ni-based MOFs with graphene (Ni-MOF/graphene). The fabricated Ni-MOF/graphene composite was characterized by powder X-ray diffraction (PXRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), Raman spectra, Brunauer–Emmett–Teller (BET) and... 

The development of high performance supercapacitors with high energy densities without sacrificing power densities has always been at the leading edge of the emerging field of renewable energy. Herein, the design and fabrication of innovative high performance binder-free electrodes consisting of coiled carbon nanotubes (CNTs) and biomass-derived hydrothermal carbon spheres (HTCSs) as, respectively, positive and negative electrodes is reported. High performance asymmetric supercapacitors (ASCs) were developed using novel 3D core/shell-like binary Ni-Co oxide (NCO) decorated coiled CNTs directly grown on Ni nano-cone arrays (NCAs) and HTCSs directly deposited on NCAs. Novel 3D structures of... 

Recently, development of advanced materials of metal-organic frameworks (MOFs) has attracted attention for the fabrication of supercapacitors (SCs) because of their high surface area and high level of porosity. However, poor electrical conductivity and weak mechanical properties of the MOFs have restricted their applications in the field. In this study, a one-step, in-situ synthesis of Cobalt-based MOF with graphene (CoMG nanocomposite) was employed to overcome the poor properties of MOFs. Accordingly, when the nanocomposite (CoMG5) was use as a supercapacitor electrode material, a specific capacitance (CS) of 549.96 F g−1 was observed in a three-electrode system with 6 M KOH electrolyte... 

Herein, we have successfully fabricated NiVS/NiCuP nanostructures on Cu wire as a fiber electrode for high performance FSMSCs applications. The 3D NiCuP dendritic film was firstly deposited on Cu wire through the electrodeposition method, which not only act as a scaffold for deposition of the electroactive materials (NiV-LDH and NiV-S), but also served as a micro-porous current collector, supplied extra capacitances. Then, NiV-LDH nanosheets grown on 3D NiCuP film were obtained using a hydrothermal method. The sulfidation of NiV-LDH is carried out through an ion-exchange reaction of OH– with S2– to obtain NiVS, which maintains an ultrathin and porous structure, improves the electrical... 

LiNi0.8Co0.1Mn0.1O2 (NCM811) has been considered as a promising cathode for Li-ion batteries (LIBs) due to its high electrochemical capacity and low cost; however, poor cycling stability is one of the main restricting factors in industrial applications of the NCM811 cathode material. Notably, the capacity fading and low structural stability of NCM811 are intensified at elevated temperatures. ZrO2- and composite rGO-ZrO2-coated NCM811 were fabricated by a facile wet chemical method and evaluated at 25 and 55 °C to overcome these impediments. The ZrO2 coating provides superior cycling and thermal stability and perfectly protects the cathode active material from deleterious side reactions, and... 

Nowadays, the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode material has attracted great research interest due to its high energy density and less usage of costly raw materials. However, the high nickel content of NCM811 brings about an extremely unstable interface between the electrode and electrolyte and therefore inferior cyclic stability. Herein, we have proposed a straightforward method to deliver 1, 2, and 4 wt % of TiO2 nanoparticles (NPs) on the surface of the NCM811 cathode material and to improve its properties at room and high temperatures. Based on scanning electron microscopy and transmission electron microscopy observations, the coating thickness varies from 10 to 35 nm and the 2 wt %... 

Recently, development of advanced materials of metal-organic frameworks (MOFs) has attracted attention for the fabrication of supercapacitors (SCs) because of their high surface area and high level of porosity. However, poor electrical conductivity and weak mechanical properties of the MOFs have restricted their applications in the field. In this study, a one-step, in-situ synthesis of Cobalt-based MOF with graphene (CoMG nanocomposite) was employed to overcome the poor properties of MOFs. Accordingly, when the nanocomposite (CoMG5) was use as a supercapacitor electrode material, a specific capacitance (CS) of 549.96 F g−1 was observed in a three-electrode system with 6 M KOH electrolyte... 

One of the efficient solar energy harvesting technics is the parabolic trough concentrated solar power plant. However, if the concentrated solar power plant were not equipped with a storage system, the power plant capacity factor would be deficient. Latent thermal energy storage system using phase change material (PCM) is a high energy density storage system to provide durable energy with a constant temperature. In this study, first, a dynamic analysis is performed implementing TRNSYS software on the parabolic trough concentrated solar power plant located in Shiraz, Iran. Consequently, this system is assisted by the latent thermal energy storage system to improve its performance and capacity... 

We hereby demonstrate symmetric and asymmetric supercapacitors (SSCs and ASCs) based on core/shell-like Ni-Co oxide@cotton//Fe2O3-carbon nanotubes@cotton that are capable of storing a remarkable amount of energy, while retaining a high power density and long cycle life. Hierarchical, porous structures of Ni-Co-O nano-rod (NR) decorated Pd-activated cotton fibers (CFs) were fabricated using an eco-benign hydrothermal method and directly used as the cathode of the supercapacitors. Fe2O3-single-wall carbon nanotube (SWCNT) decorated CFs were employed as anodes of the fabricated ASCs. The assembled Ni-Co-O@cotton//Fe2O3-SWCNTs@cotton based ASCs possessed the benefits of a relatively high energy...