Sharif Digital Repository

To fabricate ceramic/metal complex-shaped part by co-powder injection moulding process (2KPIM), it is essential to tailor the sintering parameters in order to gain a low mismatch shrinkage, i.e. high sintering compatibility. In the present work, nanocrystalline 3Y-TZP and commercial 430L MIM grade stainless steel powders were co-sintered at various sintering cycles. Isothermal and non-isothermal sintering behavior of the individual and composite layers in argon and vacuum atmospheres were examined. High resolution scanning electron microscopy (HRSEM) coupled with energy dispersive X-ray (EDX) analysis was used to study the bonding interface between the ceramic and metal joints. It is shown... 

Alg -(1, 3, 5, 7, 10 vol%) SiC nanocomposites were produced by mechanical alloying (MA) and double pressing/sintering route. The characteristics of the milled powders and the consolidate specimens were examined using high resolution scanning electron microscopy and X-ray diffraction method. Compression and hardness tests were used to study the effect of SiC volume fraction on the strength of Alg -SiC nanocomposites. It was shown that with increasing the SiC volume fraction, finer particles with narrower size distribution and smaller crystallite size are obtained after MA. During sintering close to the melting point of aluminum, the presence of nanometer-scaled SiC particles was found to... 

The effect of a plasma electrolytic oxidation (PEO) pre-treatment on joining of AA 5052 aluminium alloy and polypropylene by friction stir spot welding (FSSW) is investigated using lap tensile shear tests. Two surface conditions of the AA 5052 alloy are compared, one with a PEO pre-treatment in a silicate-based electrolyte, another without any pre-treatment. The resultant specimens are examined by high resolution scanning electron microscopy, thermogravimetric analysis and attenuated total reflectance-infrared spectroscopy. The PEO treatment generated a thermally-insulating, porous ceramic coating, which has a highly porous, rough surface that is favourable for incorporating polypropylene... 

Aluminum powder and various volume fractions of SiC particles with an average diameter of 50 nm were milled by a high-energy planetary ball mill to produce nanocrystalline Al-SiC nanocomposite powders. Double pressing/sintering process was used to consolidate powders to cylindrical specimens. It was shown that a double cycle of cold pressing and sintering can be utilized to obtain high density Al-SiC nanocomposite parts without using a hot-working step. High resolution scanning electron microscopy (HRSEM), X-ray diffraction (XRD) and laser particle size analyzer (PSA) were used to study the morphological and microstructural evolution of nanocomposite powders and bulk samples. The role of... 

Hypothesis: It is now being increasingly accepted that cells in their native tissue show different morphologies than those grown on a culture plate. Culturing cells on the conventional two-dimensional (2D) culture plates does not closely resemble the in vivo three-dimensional (3D) structure of cells which in turn seems to affect cellular function. This is one of the reasons, among many others, that nanoparticles uptake and toxicology data from 2D culture plates and in vivo environments are not correlated with one another. In this study, we offer a novel platform technology for producing more in vivo-like models of in vitro cell culture. Experiments: The normal fibroblast cells (HU02) were...