Sharif Digital Repository

The aim of this study was to evaluate the influence of bonding temperature and holding time on the metallurgical and mechanical properties for weld joints of 5 mm aluminum to copper using Sn interlayer. The bonding temperature varied from 500 to 600 °C whilst the holding time varied from 30 to 120 min under 8 MPa uniaxial load in 1 × 10−4 torr vacuum. The microstructure analysis, phase analysis and distribution of elements in the interface were performed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and element map analysis. It was found that diffusion welding parameters had a significant effect on shear strength. The attained data of tensile strength tests showed... 

In this paper, we propose a general mobility model suitable for wireless multimedia networks. Our model is based on splitting a region into subregions. Furthermore, we make an analogy between subregions as well as their inter-connections with a multi-class Jackson queueing network comprising of infinite-server nodes. The main attribute of such a network is due to its product-form stationary distribution. Using this model, we are able to obtain a closed analytical form for the spatial traffic distribution corresponding to a specific number of network-connected users with different classes of service and mobility in a typical region. Also, we show the flexibility obtained by the proposed... 

This article is focused on the application of 'Continuous Descent Approach' [CDA] to reduce the overall terminal traffic wastage of time and fuel consumption as well as reducing environmental emissions. This goal is achieved by introducing an online alternative CDA route under management of a heuristic optimization algorithm that minimizes the overall holding time. Performing a study on Atlanta international Hartsfield-Jackson airport, ATL, the results show considerable 60% decrease in cost function. Such achievement encourages the idea of implementing 'Dynamic CDA Routing Algorithm' [DCRA]  

In this study, a time simulation model for long-term wind capacity investment decisions in the presence of an electricity market and a tradable green certificate (TGC) market is proposed. Decisions related to the investments in the wind capacity are fundamentally based on incentives gained from both of these markets. Fundamental concepts and models of these markets are described. The TGC price trend-following and value-trading strategies for both generation and distribution companies and the regulatory policies for the limitation of TGC holding time and TGC borrowing fraction are included. In this study, a new dynamic model of coupled TGC and electricity markets is considered in order to... 

A new method for production of bimetallic rods, utilizing the equal channel angular extrusion (ECAE) process has been introduced before by previous researchers, but no attempt has been made to assess the effect of different temperatures and holding times in order to achieve a diffusional bond between the mating surfaces. In present research copper sheathed aluminum rods have been ECAEed at room temperature and subsequently held at a constant ECAE pressure, at different temperatures and holding times to produce a diffusional bond between the copper sheath and the aluminum core. The bonding quality of the joints was examined by shear strength test and a sound bonding interface was achieved.... 

In this research, Al 3003/Zn sheets with different Zn layer thicknesses (as filler layer) have been soldered to the monolithic Al 3003 sheets. The effects of Zn layer thickness and soldering time at the peak temperature on the joint strength of soldered Al 3003 alloy by pure Zn filler (as the soldering sheets) have been evaluated. Furthermore, microstructure and fracture mechanism of Al 3003/Zn/Al 3003 soldered joints have been studied. The results indicate that by decreasing the Zn layer thickness and increasing the holding time at the peak temperature of soldering, the joint strength improves. Additionally, microscope examinations show that the fracture type of the Al 3003/Zn/Al 3003... 

This paper addresses the process-microstructure-strength correlation during dissimilar brazing of TiAl alloy to IN738 Ni-based superalloy using Ni–4Si–3.2B filler metal. The solid/liquid reactions, solidification phenomena, and solid-state phenomena are analyzed. The thickness of the athermal solidification zone and reaction layer at different bonding conditions (holding times and temperatures) determined and analyzed using a Larson–Miller parameter (LMP). It was resulted that the shear strength of the joint can be formulated regarding bonding temperature and holding time through using LMP. It was found that the sizes of athermally solidified zone and reaction layer are two key factors... 

The bonding temperature is an important parameter for optimization of the Transient Liquid Phase (TLP) bonding process in order to achieve a sound joint with good mechanical properties. However, the bonding temperature used can also be restricted by the microstructural stability of the base metal. In this study, the effect of bonding temperature (1050-1200 °C) on the joint microstructure and mechanical properties was studied for TLP bonding of FSX-414 superalloy using MBF-80 interlayer with thickness of 50 μm. Increasing bonding temperature from 1050 to 1150 °C caused reduction in the time required for complete isothermal solidification in agreement with models based on the diffusion induced... 

In this study the influences of predeformation and heat treatment conditions on stress-induced melt activating process (SIMA) of A319 aluminum alloy were investigated. At 30% of predeformation a dominant globular structure of grains was obtained. However, further increasing of the predeformation rate considerably reduced the shape factor. The holding time of 10-15 min at semi-solid temperature of 580 °C was suggested in order to prevent grain growth. Coarsening of the grains by excess time or temperature of heat treatment reduced the tensile strength of the alloy. © 2008 Elsevier B.V. All rights reserved  

Resistance spot welding of dissimilar materials especially in different thickness is generally more challenging than that of similar materials due to differences in the physical, chemical and mechanical properties of the base metals. And also when the part is under static and dynamic forces the health of spot-welds is crucial. Hence, the influence of welding parameters such as current, time, applied force and hold time on the shear-tensile load has been investigated in this study. Moreover, in this research the case study is one of the most important body parts of the vehicle which is front wheel house, and effect of above-mentioned parameter on the strength of spot-welds has been... 

The globular structure of M2 high speed steel in the rolled - annealed and as cast conditions was investigated in the semisolid state. Metallographic observations resulted in globular austenite particles that were surrounded by a liquid phase. Dissolution of various carbides in the austenite phase at semisolid temperatures led to grain boundary liquation and formation of near-spherical solid grains in a liquid matrix. Therefore, at the semisolid state, the solid particles were free from carbides. MC-type and M6C-type eutectic carbides re-precipitated at the grain boundaries during cooling of the samples from the semisolid temperature. The variation of shape factor versus holding time and... 

In this study, the resistance spot welding (RSW) process of the galvanized interstitial free (IF) steel sheets and galvanized bake hardenable (BH) steel sheets, used in the manufacturing of car bodies, has been modeled and optimized. The quality measure of a resistance spot welding joint is estimated from the tensile-shear strength. Furthermore, four important process parameters, namely welding current (WC), welding time (WT), electrode force (EF), and holding time (HT) are considered as the factors influencing the quality of the joints. In order to develop an accurate relationship between the process inputs (4-component vectors) and the response output (tensile-shears strength) at first a... 

4340 steel bars were austenitized at 850°C for 1 hour followed by heating at 700°C (ferrite and austenite region) for 90 min and quenching into a salt bath with different temperatures of 300, 350, 400 and 450°C. The steel bars were held for 1 hour at these temperatures before air cooling to room temperature. Various ferrite-bainite microstructures with 34% volume fraction of ferrite and different bainite morphologies were obtained. The results of SEM studies showed that by increasing the austempering temperature, the morphology of bainite varies from lower to upper bainite. According to the T-T-T diagram of the studied steel, the bainite transformation will not complete for the holding time...