Sharif Digital Repository

Nowadays, a fluidized bed with gas plays an important part in the industry. The design of this kind of reactor requires knowing the interfacial area between two phases and this interfacial area leads to calculate the solid holdup in the bed. Consequently achieving interfacial area between gas and solid in the bed experimentally is so significant. On interfacial area measurement in fluidized bed with gas has been worked, but light transmission technique has been used less. Therefore, in the current research the possibility of using of this technique and its accuracy are investigated. Of course, fluidizing solid in gas phase is so difficult and it encounters problems such as gas improper... 

packed columns are important in liquid-liquid extraction processes. In most studies, at first, drops are broken to small drops as much as possible and then they contact with packings. But, because of different reasons drops during their moving up coalescence together. So far, there is not serious investigation about hydrodynamics of these large drops and their breakage in packed columns. Thus, breakage of two different sizes of drops while collision to 3 different height of 4 different type of packings with two volumetric flow rates and in 2 cases of straight collision of drops to bed and collision to support plate has been investigated. Then size distribution of produced drops throughout... 

Dispersed phase holdup has been measured in a 75 mm diameter pulsed disc and doughnut extraction column for three different liquid-liquid systems. The effects of operational variables such as pulsation intensity and dispersed and continuous phases flow rates on holdup have been investigated and found to be significant. The existence of three different operational regimes, namely mixer-settler, dispersion, and emulsion regimes, was observed when the energy input was changed. The results indicated that the characteristic velocity approach is applicable to this type of extraction column for analysis holdup in transition and emulsion regions. Empirical correlations are derived for prediction of... 

The dispersed phase holdup is one of the important parameters in the design pulsed column and set the column diameter, height and characteristics of flooding and mass transfer. High efficiency and low space requirements of these columns cause is particularly in the nuclear industry, Due to the possible presence of radiation and the need for protection against radiation, considered and used. In this project, the dispersed phase holdup and mean residence time in a pulsed disc and donut column in a semi-industrial scale using radiotracer and shut down methods compared and presented for water-kerosene system. Also axial dispersion coefficient in the column using radiotracer methods is calculated... 

Most of the time there are three different materials in oil wells; Oil, water and gas. Measuring volume percentage and flow of the individual materials (phases) is an important issue, due to their critical role in extraction process control. Measuring tool should be able to measure flow and percentage of each phase in a case that they are separated (in deviated wells due to gravity). In addition, the measurement should be carried on in a high temperature and high pressure environment and in presence of corrosive substances. Most of previous researches on Multi-Phase Flow Meter (or MPFM) led to mechanical methods to measure flow and they usually use electrical impedance or permittivity for... 

Pulsed packed columns are among the most important devices used in liquid-liquid extraction, with wide application in petroleum and petrochemical industries, metal salt extraction, pharmaceutical industries, metallurgy, and other areas. Liquid-membrane technology is an alternative separation technique to the liquid-liquid extraction for the extraction and recovery of metal ions from aqueous solutions. There are three main types of liquid membranes: emulsion liquid membrane (ELM), Bulk Liquid Membrane (BLM), and Supported Liquid Membrane (SLM). Liquid emulsion membrane is one of the pertraction methods with phase dispersion. It is a three-phase dispersion system, consisting: external phase,...