Sharif Digital Repository

In this study, the hardness inhomogeneity of billets during multi-passes of equal channel angular pressing (ECAP) at elevated temperatures is investigated and the effect of large strain deformation during ECAP on the hardness inhomogeneity characteristics due to dynamic aging of aluminum 6061 under a variety of temperatures and ram speed was studied by TEM and hardness measurements. The hardness results showed that the hardness distribution is more homogenous after four passes using the pressing route Bc. However, when the deformation temperature was considered, performing ECAP at 100 C may provide the most homogeneous microstructure after multi-pressing as long as the total number of... 

In this paper application of Functionally Graded Materials (FGMs) in suspension bridge structures for the purpose of vertical vibration improvement is investigated. Functionally graded materials are inhomogeneous composites, which are usually made from a mixture of metal and ceramic. Initially the classical equation of motion is modified based on the FGM model and natural frequencies of structure are extracted by Galerkin method. The material properties of structure vary continuously in the longitude direction according to power law form. In this regard, combination of materials is structured in such a way that the desired frequencies of the bridge are achieved by designing the proper power... 

A two-stage hydrogen-reduction/sintering procedure was used to synthesize W-15 wt%Cu nano-composite tablets. Hydrogen-reduction was carried out at 600, 650, 700 and 750 °C for 15-90 min and sintering was performed at 1100, 1150, 1200 and 1250 °C for 60 min. Morphology and grain size of the products were rigorously investigated by scanning electron microscope (SEM), X-ray diffractometer (XRD) and nano-particle Zeta-sizer. Maximum consolidation of the nano-composite product was achieved at 1200 °C. Hydrogen-reduction at 700 °C for 90 min showed an average particle size of ∼72.9 nm. Total reduction was achieved at higher temperatures and longer times. The mixture had a homogeneous structure... 

Porous NiTi-shape memory alloy (SMA) is a promising biomaterial with desirable mechanical property and appropriate biocompatibility for human implant manufacturing. In this research, porous NiTi-SMAs have been successfully produced by using thermohydrogen process (THP). This process has capability of production of homogenous structures, appropriate pore-size distributions and short sintering times. The THP-SMA samples produced in this research have a low Young's modulus (19.8 GPa) and a high tensile strength of 255 MPa. These properties are close to those of the natural bone and can meet the mechanical property demands of the hard-tissue implants for heavy load-bearing applications. The... 

WO3 films with thicknesses between 550 and 853 nm were deposited on glass substrates using the electron beam evaporation method at room temperature. The microstructures and surface roughness of the films were studied by X-ray diffraction (XRD) and atomic force microscopy (AFM). It was observed that the crystalline structure of the WO3 thin films significantly changes from the amorphous to crystalline states with a crystalline texture, and the mosaicity and grain size dependent on the film thickness. The transmittance spectra of the obtained WO3 films were measured in the range from 340 to 850 nm, and the Swanepoel method was used to determine the refractive indices and the thicknesses of the... 

WO3 films with thicknesses between 550 and 853 nm were deposited on glass substrates using the electron beam evaporation method at room temperature. The microstructures and surface roughness of the films were studied by X-ray diffraction (XRD) and atomic force microscopy (AFM). It was observed that the crystalline structure of the WO3 thin films significantly changes from the amorphous to crystalline states with a crystalline texture, and the mosaicity and grain size dependent on the film thickness. The transmittance spectra of the obtained WO3 films were measured in the range from 340 to 850 nm, and the Swanepoel method was used to determine the refractive indices and the thicknesses of the... 

Natural compounds containing polysaccharide ingredients have been employed as candidates for treatment of skin tissue. Herein, for the first time, electrospinning setup was proposed to fabricate an efficient composite nanofibrous structure of Beta vulgaris (obtained from Beet [Chenopodiaceae or Amaranthaceae]) belonged to polysaccharides and an elastic polymer named nylon 66 for skin tissue engineering. Both prepared scaffolds including noncomposite and composite types were studied by Scanning electron microscope (SEM), Fourier transform infrared (FTIR) spectroscopy, mechanical assay, and contact angle. Scanning electron microscope examinations have approved the uniform and homogeneous...