Sharif Digital Repository

In past decades, many attempts have been made to use water-soluble polymers as a mobility control agent to improve sweep efficiency of enhanced oil recovery processes. However, sensitivity of the thickening behavior of these polymers to some harsh conditions, such as high salinity, has cast serious doubt on their applicability in reservoir conditions. By expansion of nanotechnology, scientists discovered that nanoparticles can be utilized as thickening and rheology control agents in many polymer solutions. In this study, hydrophilic fumed silica is added to hydrolyzed polyacrylamide and sulfonated polyacrylamide solutions. The effect of the addition of nano silica on the thickening and... 

The major objectives of this study are to analytically and experimentally determine the residual resistance factor in the fractured medium based on the polymer solution properties and operational conditions. The parameters considered in this study are the polymer concentration, power law constitutive equation parameter, and salt concentration, sulfonation content of polymer, temperature, and molecular weight of the water soluble polymers which are used in polymer flooding for enhanced oil recovery. The results indicated that residual resistance factor in fractured medium is dependent on the coil overlap parameter and power law equation parameter of polymer. The coil overlap parameter is a... 

Although viability of low-salinity waterflooding (LSWF) at the laboratory scale has been proven, there are some challenges associated with its field application, which sheds uncertainties on its economic success. One of the challenges is the minimum required volume of low-salinity water, which should be injected to the reservoir due to the salt dispersion in porous media. Once the low-saline brine is injected into the reservoir, mixing of injected (low-salinity) and resident (high-salinity) brines occurs and the developed mixing zone grows continuously as the front moves from the injection well toward the production well. Increase in the salinity of the front reduces the efficiency of LSWF.... 

The main idea behind the application of Low salinity polymer flooding (LSPF) enhanced oil recovery (EOR) method is that diluted brine improves the oil recovery by wettability alteration from oil-wet (OW) towards water-wet (WW) condition, while polymer enhances the mobility of the displacing phase. However the possible effect of polymer on the fluid/fluid and fluid/rock interactions are not investigated systematically in the literature. The main objective of the present reserach is to examine the possible effect of hybrid application of low-salinity and polymer on the brine/rock and brine/oil interfaces properties. Formation water (FW) and sea water (SW) and its two different dilutions, i.e.... 

Although alkaline-surfactant-polymer flooding is proved to be efficient for oil recovery from heavy oil reservoirs, the displacements mechanism/efficiency of this process in fractured systems needs to more discussion, especially in five-spot patterns. In this work, several ASP flooding test were performed on fractured micromodels which were initially saturated with heavy oil at constant flow rate and different fracture geometrical characteristics conditions. The ASP solutions are constituted from 5 polymers i.e. four synthetic polymers include three hydrolyzed polyacrylamide with different molecular weight as well as a non-hydrolyzed polyacrylamide and a biopolymer, 2 surfactants i.e. a... 

Although alkaline-surfactant-polymer (ASP) flooding has proven efficient for heavy oil recovery, the displacement mechanisms and efficiency of this process should be discussed further in fractured porous media. In this study, several ASP flooding tests were conducted in fractured glass-etched micromodels with a typical waterflood geometrical configuration, i.e. five-spot injection-production pattern. The ASP flooding tests were conducted at constant injection flow rates but different fracture geometrical characteristics. The ASP solutions consisted of five polymers, two surfactants, and three alkaline types. It was found that using synthetic polymers, especially hydrolyzed polyacrylamide... 

A new nanocomposite polymer gel is synthesized for reduction of excess water production in petroleum reservoirs at real operating conditions. This new nanocomposite gel contains SiO2 nanoparticles, partially hydrolyzed polyacrylamide (HPAM) and chromium triacetate. High pressure and high temperature tests using porous carbonate core are carried out to evaluate the effects of nanoparticles on the synthesized polymer gel performance. It is shown that the residual resistance factor ratio of water to oil using the synthesized polymer gel nanocomposite in this work is much higher than that of the ordinary polymer gels. The presented results confirm the high performance of the synthesized...