Sharif Digital Repository

In this report, the efficacy of different factors such as temperature of reaction, time of reaction and depth of bed are investigated in a process of recovery of zinc oxide from zinc ore concentration residues in a fluidized bed furnace. Under optimum conditions, there was more than 93.5% zinc oxide in products  

In this paper, LM pectin production from commercial apple pectin by using acid, alkali and ammonia methods in the presence of ethanol was studied. Also, the effect of different parameters such as, temperature, time, acid, alkali and ammonia treatment in LM pectin production were evaluated. In all the experiments, low temperature showed a better influence from a recovery, purity and low de-polymerization viewpoint. Optimum conditions in the acid method reached at pH = 2, t = 17 hrs and T = 30°C, in the alkaline method reached at pH = 11, t = 3 hrs and T = 5°C and in the ammonia method reached at 2 N ammonia and T = 5°C, were determined. © Sharif University of Technology  

In this paper, thermo mechanical finite element analysis of orthogonal machining process with a flexible tool is carried out to study the dynamic behaviour of the machining system and its stability against chatter vibration. By combining the simulation of chip formation in metal cutting with the dynamic phenomena leading to chatter development, the influence of various phenomena, including thermal effects resulting from friction and plastic deformations on the stability of the process are investigated. The novelty of this model is in its ability to evaluate the effect of temperature rise in the cutting zone on the stability of cutting process. Process stability is analyzed and compared for... 

This study was focused on the heavy metal (Ni, Co, Mo, V, Mn, Fe, W and Zn) tolerance of fungi strains Aspergillus niger, Aspergillus foetidus and Penicillium simplicissimum. Aspergillus niger was exposed to a mixture of Mo, V and Mn at a mass ratio of 1:2:6 as approximately present in the spent refinery processing catalyst. This study highlights the adaptation of fungi strains to Tungsten and Vanadium to high concentration. The effect of different metals and metal concentration on different strains of fungi was evaluated. Results showed that Ni was one of the most toxic metals for strains of Aspergillus and Penicillium. Aspergillus foetidus was the least tolerant, in particular for Ni, Co... 

The purpose of this research was twofold; first, it focused on developing quantitative wastage models for rebar, concrete, brick, and cement, as major traditional bulk building materials, used in Tehran residential buildings. The primary results indicated that multiple linear regression was an apt tool to model the effects of the studied variables on materials wastage. In every developed wastage model, subtractive or accumulative effect of each studied variable was recognized by its coefficient value and sign. The developed models resulted in adjusted R2 values of 0.907, 0.875, 0.920, and 0.790, respectively, for rebar, cement, brick, and concrete waste. Cement, with average wastage of 8.57%... 

The purpose of this research was twofold; first, it focused on developing quantitative wastage models for rebar, concrete, brick, and cement, as major traditional bulk building materials, used in Tehran residential buildings. The primary results indicated that multiple linear regression was an apt tool to model the effects of the studied variables on materials wastage. In every developed wastage model, subtractive or accumulative effect of each studied variable was recognized by its coefficient value and sign. The developed models resulted in adjusted R2 values of 0.907, 0.875, 0.920, and 0.790, respectively, for rebar, cement, brick, and concrete waste. Cement, with average wastage of 8.57%... 

The aim of this work was to study the treatment of strong beet sugar wastewater by an upflow anaerobic fixed bed (UAFB) at pilot plant scale. Three fixed bed bioreactors (each 60 L) were filled with standard industrial packing, inoculated with anaerobic culture (chicken manure, cow manure, anaerobic sludge digested from domestic wastewater) and operated at 32-34 °C with 20 h hydraulic retention time (HRT) and influent COD ranging between 2000-8000 mg/L. Under these conditions the maximum efficiency of organic content reduction in the reactor ranged from 75% to 93%. The reactor filled with standard pall rings made of polypropylene with an effective surface area of 206 m2/m3 performed best in... 

In this work, the electrophoretic deposition method was utilized to immobilize TiO2 particles on stainless steel substrates. In addition, for the first time, statistics-based experimental design using response surface methodology was employed to investigate the effect of four key coating parameters (i.e. applied voltage, calcination temperature, photocatalyst weight percentage, and deposition time) on the photocatalytic degradation. Analysis of variance revealed that the proposed model was adequate. X-ray diffraction and scanning electron microscope were used to evaluate the effects of the parameters on degradation efficiency. The optimum applied voltage, calcination temperature, catalyst... 

Biosurfactant production through a fermentation process involving the biodegradation of soybean oil refining wastes was studied. Pseudomonas aeruginosa MR01 was able to produce extracellular biosurfactant when it was cultured in three soybean oil refinement wastes; acid oil, deodorizer distillate and soapstock, at different carbon to nitrogen ratios. Subsequent fermentation kinetics in the three types of waste culture were also investigated and compared with kinetic behavior in soybean oil medium. Biodegradation of wastes, biosurfactant production, biomass growth, nitrate consumption and the number of colony forming units were detected in four proposed media, at specified time intervals.... 

Adaptation of Penicillium simplicissimum with different heavy metals present in a spent hydrocracking catalyst, as well as one-step, two-step, and spent medium bioleaching of the spent catalyst by the adapted fungus, was examined in batch cultures. Adaptation experiments with the single metal ions Ni, Mo, Fe, and W showed that the fungus could tolerate up to 1500. mg/L Ni, 8000. mg/L Mo, 3000. mg/L Fe, and 8000. mg/L W. In the presence of multi-metals, the fungus was able to tolerate up to 300. mg/L Ni, 200. mg/L Mo, 150. mg/L Fe and 2500. mg/L W. A total of 3% (w/v) spent catalyst generally gave the maximum extraction yields in the two-step bioleaching process (100% of W, 100% of Fe, 92.7%... 

Crude oil desalter effluent from a Tehran oil refinery was treated by a hybrid UF/RO membrane separation process. Ultrafiltration (UF) was used primarily to remove the emulsified oil droplets followed by the removal of total dissolved solids (TDS) via reverse osmosis (RO). The UF membrane was a hydrophilic flat sheet polysulfone ultrafiltration membrane with MWCO of 100 kDa while the RO membrane was a spiral-wound thin-film composite polyamide. Effect of operating conditions such as transmembrane pressure and crossflow velocity were studied in UF pretreatment. The experimental results showed that the UF membrane removed more than 75% of the oil and can be considered as an effective... 

The photocatalytic degradation of Reactive Blue 19 (RB19) dye has been studied using TiO2 nanofibre as the photocatalyst in aqueous solution under UV irradiation. Titanium dioxide nanofibre was prepared using a templating method with tetraisopropylorthotitanate as a precursor. The experiments were carried out in the presence of the TiO2 nanofibre, and the effects of pH and electron acceptors on the degradation process were investigated. In order to observe the quality of the aqueous solution, chemical oxygen demand (COD) measurements were also carried out before and after the treatments. The photocatalytic decomposition of RB19 was most efficient in acidic solution. With the addition of... 

Dynamic hydrosalinity models are available, but are not used extensively on a large scale soil which receives wastewater from industrial areas, partly because adequate database are expensive to be obtained. Thus, for this reason, there is an urgent need to assess the salt and other pollutant loads collected in wastewater flows into the soil and/ or ground water systems. A conceptual hydrosalinity model was used on two major underlying principals of mass balance and steady state. This model was initially tested on the 4,117 km2 plains west of the Yazd-Ardakan district in the central part of Iran. This model was used at a time when the soil and ground water salinity problem was serious due to... 

Massive amounts of spent lead-acid battery separators with 50 wt % silica nanoparticles (SiNPs) can be recycled for further use. One compelling application is form-stable phase change materials (FSPCMs). This study proposes a novel tertiary eutectic mixture of green and non-toxic lauric acid, palmitic acid, and paraffin, and recycled SiNPs to find a sustainable approach to deal with industrial wastes and energy consumption. Fatty acids and paraffin are promising for thermal energy storage in buildings. However, they lack sufficient thermal conductivity, mechanical strength, and suffer from leakage. To give mechanical strength, high-density polyethylene (HDPE) was added and sintered.... 

The process kinetics of a lab-scale upflow aerobic immobilized biomass (UAIB) reactor using simulated sugar-manufacturing wastewater as feed was investigated. The experimental unit consisted of a 22 l reactor filled with high porosity pumice stone. The UAIB reactor was tested under different organic loads and different hydraulic retention times (HRT) and the substrate loading removal rate was compared with prediction of Stover-Kincannon model, second-order model and the first order substrate removal model. After obtaining steady-state conditions, organic loading rate was increased from 750 to 4500 g COD/m3 day to resemble wastewater from sugar production lines, and hydraulic retention time... 

Wastewater of purified terephthalic acid (PTA) from a petrochemical plant was examined in a membrane-less single chamber microbial fuel cell for the first time. Time course of voltage during the cell operation cycle had two steady phases, which refers to the fact that metabolism of microorganisms was shifted from highly to less biodegradable carbon sources. The produced power density was 31.8 mW m-2 (normalized per cathode area) and the calculated coulombic efficiency was 2.05 % for a COD removal of 74 % during 21 days. The total removal rate of different pollutants in the PTA wastewater was observed in the following order: (acetic acid) > (benzoic acid) > (phthalic acid) > (terephthalic... 

Rhamnolipids are the most common biosurfactants and P. aeruginosa strains are the most frequently studied microorganisms for the production of rhamnolipids. Eco-friendly advantages and promising applications of rhamnolipids in various industries are the major reasons for pursuing the economic production of these biosurfactants. This study shows that cultivation of P. aeruginosa MR01 in medium contained inexpensive soybean oil refinery wastes which exhibited similar levels and homologues of rhamnolipids. Mass spectrometry indicated that the Rha-C10-C10 and Rha-Rha-C10-C10 constitute the main rhamnolipids in different cultures of MR01 including one of oil carbon source analogues. Moreover,...