Sharif Digital Repository

This research investigated the long-term environmental effects on bond strength at the interface between fiber- reinforced polymers (FRPs) and timber. A total of 581 timber specimens were bonded with seven types of FRP sheets (unidirectional and bidirectional glass, carbon, aramid, and hybrids) using a wet lay-up technique. The specimens were exposed to acidic, alkaline, fresh water, and sea water solutions with pH of 2.5, 7, 7.25, 10, and 12.5 for 1, 3, 6, 9, and 12 months. A chamber was also used to simulate ultraviolet radiation after 6 months. A series of single-lap shear tests were then conducted to determine the interfacial bond strength reduction. The results showed that bidirectional... 

In this study, tensile strength of gypsum-based composite with aluminum fibers up to 15 vol.% was studied. To increase the interfacial bond strength between fibers and matrix, aluminum fibers were anodized under different conditions. Single fiber pull-out tests were carried out to investigate the bond strength. The interface was examined by scanning electron microscope. The ability of the composites to withstand longitudinal tensile load was also studied by tensile tests of dog bone-shaped, randomly oriented fiber-reinforced gypsum. By the introduction of aluminum fibers in gypsum as a randomly oriented composite, considerable increment in the strength is achieved and the toughness of the... 

This research investigated the long-term environmental effects on the bond at the interface between fiber-reinforced polymer (FRP) and a masonry brick. Seven types of FRP fabrics were used and placed on the masonry brick using the wet lay-up technique. Unidirectional and bidirectional fibers made of aramid, carbon, and glass and also combination of these fabrics were used. A total of 525 specimens were exposed to five chemical solutions with pH values of 2.5, 7, 10, 12.5 and substitution sea water for 1, 3, 6, 9 and 12 months. A chamber was also used to simulate the ultraviolent (UV) radiation on the specimens. A series of single-lap shear tests were performed on these specimens to determine...