Loading...
Search for:
interfacial-characterization
0.006 seconds
Diffusion brazing of Ti–6Al–4V and AISI 304: an EBSD study and mechanical properties
, Article Journal of Materials Science ; Volume 52, Issue 20 , 2017 , Pages 12467-12475 ; 00222461 (ISSN) ; Shamanian, M ; Atapour, M ; Khosravi, B ; Sharif University of Technology
Abstract
Ti–6Al–4V and AISI 304 stainless steel were joined by diffusion brazing with a Cu interlayer at 900 °C for different bonding times. The influence of the bonding time on the joint width, microstructure, microhardness and shear strength was studied. Interfacial characterizations and the identification of phases were done by scanning electron microscopy and electron backscatter diffraction (EBSD). The results revealed that by increasing the bonding time, the thickness of the joint was first increased and then decreased. Microstructure examinations also showed that the joints consisted of several intermetallics such as TiCu, Ti2Cu, TiCu4, TiCu2, FeTi and Fe2Ti. On the other hand, EBSD results...
The effective mechanical properties and the interfacial characterization of CNT reinforced nanocomposites
, Article Proceedings of SPIE - The International Society for Optical Engineering, 9 March 2009 through 11 March 2009, San Diego, CA ; Volume 7294 , 2009 ; 0277786X (ISSN); 9780819475541 (ISBN) ; Naghdabadi, R ; The International Society for Optical Engineering (SPIE) ; Sharif University of Technology
2009
Abstract
A small volume fraction of Carbon Nanotubes (CNTs) added in a polymeric matrix increases significantly the mechanical properties of the polymers. It is experimentally determined from the TEM images of CNT-based nanocomposites that nanotubes don't stand straight in their embedded matrix and they have some curvature in their shape. The load transfer mechanism between CNT and polymer matrix is also one of the most important issues which is not understood explicitly, yet. In this paper a wavy Single Walled Carbon Nanotube (SWCNT) is modeled as inclusion in a polymer matrix and its effective mechanical properties is studied. This model is based on using 3-D Representive Volume Element (RVE) with...