Sharif Digital Repository

The solubility of carbon dioxide in a series of 1-(2-hydroxyethyl)-3-methylimidazolium ([hemim]+) based ionic liquids (ILs) with different anions, viz. hexafluorophosphate ([PF6]-), trifluoromethanesulfonate ([OTf]-), and bis-(trifluoromethyl)sulfonylimide ([Tf2N]-) at temperatures ranging from 303.15 K to 353.15 K and pressures up to 1.3 MPa were determined. The solubility data were correlated using the Krichevsky-Kasarnovsky equation and Henry's law constants were obtained at different temperatures. Using the solubility data, the partial molar thermodynamic functions of solution such as Gibbs free energy, enthalpy, and entropy were calculated. Comparison showed that the solubility of CO2... 

Synchronous heterogeneous catalytic hydrogenation of cyclohexene and acetone, catalyzed by Pt/Al2O3, was carried out in solutions of 2-hydroxy ethylammonium formate (a room temperature ionic liquid, RTIL) with ethanol and propan-1-ol at 25 °C. Rate constants and selectivity of the reaction (relative to cyclohexene hydrogenation) increase with mole fraction of the ionic liquid (IL). The reactants tendency to the catalyst surface increases by addition of the ionic liquid and thus the reaction rate increases, especially for cyclohexene hydrogenation. Consequently the selectivity to cyclohexene hydrogenation was increased. Single-parameter correlations of log k vs. π* (dipolarity/polarizibility)... 

The solubility of hydrogen sulfide in three ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]), 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf 2N]), at temperatures ranging from (303.15 to 343.15) K and pressures up to 1 MPa was determined. The solubility data were correlated using the Krichevsky-Kasarnovsky equation, and Henry's law constants at different temperatures were obtained. From the solubility data, the partial molar thermodynamic functions of solution such as Gibbs energy, enthalpy, and entropy were calculated. Comparison showed that the solubility of H2S in these... 

The second-order rate constants for cycloaddition reaction of cyclopentadiene with naphthoquinone were determined spectrophotometrically in various compositions of 1-(1-butyl)-3-methylimidazolium terafluoroborate ([bmim]BF4) with water and methanol at 25°C. Rate constants of the reaction in pure solvents are in the order of water > [bmim]BF 4 > methanol. Rate constants of the reaction decrease sharply with mole fraction of the ionic liquid in aqueous solutions and increase slightly to a maximum in alcoholic mixtures. Multi-parameter correlation of logk 2 versus solute-solvent interaction parameters demonstrated that solvophobicity parameter (Sp), hydrogen-bond donor acidity (α) and... 

Structural and intermolecular interactions of solvatochromic probes 4-nitroaniline, 4-nitroanisole, and Reichardt’s dye were investigated in the binary mixtures of 2-hydroxy ethylammonium formate as an ionic liquid with N,N-dimethyl formamide, dimethyl amine, and dimethyl sulfoxide. Solvatochromic parameters (ETN, normalized polarity parameter; π*, dipolarity/polarizability; β, hydrogen-bond acceptor basicity; α, hydrogen -bond donor acidity) were determined in ionic liquid mixtures at 25 °C using UV−vis spectroscopy. ETN parameters obtained from absorbance of Reichardt’s dye within various mixtures of ionic liquid were observed to be higher than predicted values from ideal additive... 

Structural and intermolecular interactions of solvatochromic probes 4-nitroaniline, 4-nitroanisole, and Reichardts dye were investigated in the binary mixtures of 2-hydroxy ethylammonium formate as an ionic liquid with N,N-dimethyl formamide, dimethyl amine, and dimethyl sulfoxide. Solvatochromic parameters (ETN, normalized polarity parameter; π, dipolarity/polarizability; β, hydrogen-bond acceptor basicity; α, hydrogen -bond donor acidity) were determined in ionic liquid mixtures at 25°C using UV-vis spectroscopy. ETN parameters obtained from absorbance of Reichardt dye within various mixtures of ionic liquid were observed to be higher than predicted values from ideal additive behavior.... 

A simple functional form for a general equation of state based on an effective near-neighbor pair interaction of an extended Lennard-Jones (12,6,3) type is given and tested against experimental data for a wide variety of fluids and solids. Computer simulation results for ionic liquids are used for further evaluation. For fluids, there appears to be no upper density limitation on the equation of state. The lower density limit for isotherms near the critical temperature is the critical density. The equation of state gives a good description of all types of fluids, nonpolar (including long-chain hydrocarbons), polar, hydrogen-bonded, and metallic, at temperatures ranging from the triple point... 

The solubility of hydrogen sulphide in three ionic liquids, viz. 1-hexyl-3-methylilmidazolium hexafluorophosphate ([hmim][PF6]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim][BF4]), and 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([hmim][Tf2N]), at temperatures ranging from 303.15 K to 343.15 K and pressures up to 1.1 MPa were determined. The solubility values were correlated using the Krichevsky-Kasarnovsky equation and Henry's constants were obtained at different temperatures. Partial molar thermodynamic functions of solvation such as standard Gibbs free energy, enthalpy, and entropy were calculated from the solubility results. Comparison of the values obtained... 

Homopolymer hydrogel of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) and its nanocomposite counterpart were prepared to study their swelling properties. The hydrogels showed ability to absorb and retain electrolytes as well as binary mixtures of water and organic solvents (i.e., methanol, ethanol, acetone, ethylene glycol (EG), polyethylene glycol, N-methyl-2-pyrrolidone (NMP), and dimethylsulfoxide (DMSO). The nanocomposite gel exhibited lower swelling in all solvent compositions in comparison with non-composite gel. Unlike conventional acrylic acid-based hydrogels, the poly(AMPS) gels showed superabsorbing capacity in pure ethanol, methanol, EG, DMSO and NMP. Meanwhile, swelling... 

In this work, molecular dynamic simulation of the mixture of imidazolium based ionic liquids with alcohols is implemented in order to investigate mixing excess properties and some structural and physical properties of the mixture. Excess volumes and enthalpies are evaluated for 11 different mole fractions of ionic liquids at each 0.1, in the range of 0 to 1. Radial distribution function, cohesive energy density, potential of mean force, solvation energy, and diffusion coefficient are reported and analysed. The effects of the cationic alkyl chain length, in comparison with changes of the anions, on these properties are reported. Results reveal that the methanol molecule participates with its... 

In this work, the selectivity coefficients of ionic liquids in liquid-liquid systems were correlated and predicted by the NRTL, UNIQUAC, and Wilson-NRF Gibbs free energy models and also by an artificial neural network system. The three thermodynamic models need six binary interaction parameters between solvent(1)-solvent(2), solvent(1)-ionic liquid, and solvent(2)-ionic liquid pairs in obtaining the selectivity of ionic liquid in liquid-liquid systems. Also, the selectivity coefficients of ionic liquids were modeled using an artificial neural network system. In the proposed neural network system, temperature, molecular weight of ionic liquid, molecular weight of solvents, and mole fractions... 

A micro-SPE technique was developed by fabricating a rather small package including a polypropylene membrane shield containing the appropriate sorbent. The package was used for the extraction of some triazine herbicides from aqueous samples. Solvent desorption was subsequently performed in a microvial and an aliquot of extractant was injected into GC-MS. Various sorbents including aniline-ortho-phenylene diamine copolymer, newly synthesized, polypyrrole, multiwall carbon nanotube, C18 and charcoal were examined as extracting media. Among them, conductive polymers exhibited better performance. Influential parameters including extraction and desorption time, desorption solvent and the ionic... 

TiO2 nanoparticles were prepared by the sol - gel process using 2-hydroxylethy- lammonium formate as an ionic liquid. Nanoparticles were crystallized at various temperatures (300-700°C). The products were characterized using X-ray diffraction (XRD), nitrogen adsorption - desorption isotherms and scanning electron microscopy (SEM) techniques. It was found that the resulting TiO2 nanoparticles had good thermal stability either to resist collapse or the anatase-to-rutile phase transformation during heat treatment. The photocatalytic activity of the nanocrystalline TiO2 was evaluated by the degradation of Acid Blue 92 (AB92) which is commonly used as a textile dye. The results showed that the... 

TiO2 and transition metal (Cr, Mn, Fe, Co, Ni, Cu, and Zn) doped TiO2 nanoparticles were synthesized by the sol-gel method using 2-hydroxylethylammonium formate as an ionic liquid. All the prepared samples were calcined at 500 °C and characterized by X-ray diffraction (XRD), BET surface area determination, energy dispersive X-ray (EDX) analysis, diffuse reflectance spectroscopy (DRS), and Fourier transformed infrared (FT-IR) techniques. The studies revealed that transition metal (TM) doped nanoparticles have smaller crystalline size and higher surface area than pure TiO2. Dopant ions in the TiO2 structure caused significant absorption shift into the visible region. The results of... 

A headspace solid-phase dynamic extraction (HS-SPDE) technique was developed by the use of polypyrrole (PPy) sorbent, electropolymerized inside the surface of a needle, as a possible alternative to solid-phase microextraction (SPME). Thermal desorption was subsequently, employed to transfer the extracted analytes into the injection port of a gas chromatography-mass spectrometry (GC-MS). The PPy sorbent including polypyrrole-dodecyl sulfate (PPy-DS) was deposited on the interior surface of a stainless steel needle from the corresponding aqueous electrolyte by applying a constant deposition potential. The homogeneity and the porous surface structure of the coating were examined using the... 

Photodegradation of Escherichia coli bacteria in presence of Ag-TiO2/Ag/a-TiO2 nanocomposite film with an effective storage of silver nanoparticles was investigated in the visible and the solar light irradiations. The nanocomposite film was synthesized by sol-gel deposition of 30 nm Ag-TiO2 layer on ∼200 nm anatase(a-)TiO2 film previously doped by silver nanoparticles. Both Ag/a-TiO2 and Ag-TiO2/Ag/a-TiO2 films were transparent with a SPR absorption band at 412 nm. Depth profile X-ray photoelectron spectroscopy showed metallic silver nanoparticles with diameter of 30 nm and fcc crystalline structure were self-accumulated on the film surface at depth of 5 nm of the TiO2 layer and also at the...