Sharif Digital Repository

In this research "MnO2/MWCNT" nanocomposite was prepared firstly and then it was used as an adsorbent for Cr+3 ions removal from aqueous solutions. Our results showed that the prepared nanocomposite from modified multi-wall carbon nanotube and MnO2 has a good capacity for Cr+3 removal from aqueous solution. Morphology and Crystallinity of the modified MWCNT before and after deposition on MnO2 were examined by SEM and XRD. In turn, the experimental results were examined according to the Langmuir, Freundlich and Temkin Isotherms and Freundlich isotherm represented our experimental results  

In this research "MnO2/MWCNT" nanocomposite was prepared firstly and then it was used as an adsorbent for Cr+3 ions removal from aqueous solutions. Our results showed that the prepared nanocomposite from modified multi-wall carbon nanotube and MnO2 has a good capacity for Cr+3 removal from aqueous solution. Morphology and Crystallinity of the modified MWCNT before and after deposition on MnO2 were examined by SEM and XRD. In turn, the experimental results were examined according to the Langmuir, Freundlich and Temkin Isotherms and Freundlich isotherm represented our experimental results  

In uranium conversion industry, the fluorine is used as chemical raw material gas to produce UF4 and UF6 while its purity is very important. In this study, the adsorption process of hydrogen fluoride, as an impurity in the process of fluorine production, on sodium fluoride pellets is experimentally studied in a lab-scale fixed bed adsorbent. Also, the effects of some operating parameters including inlet concentration and inlet temperature of hydrogen fluoride are precisely investigated on the adsorption process. The data of adsorption are analyzed and correlated by Langmuir, Freundlich and Temkin isotherms. The adsorption capacity is found to be 1.908 and 0.750 g HF/g NaF by the Langmuir... 

A two-step pack cementation technique was used to cover nickel-based IN-738LC superalloy with a Cr-aluminide coating layer. The IN-738LC/Cr-aluminide samples were oxidized at 900 °C for 350 and 700 h, isothermally, and 175 and 350 h, cyclically. Each cycle lasted for 25 h. Effects of the isothermal and the cyclic oxidation on (a) morphology, (b) new-phase formation, (c) weight gain, and (d) oxidation reactions were investigated by scanning electron microscopy, electron dispersive spectroscopy, X-ray diffraction, and weight gain measurements. From results, it was concluded that the oxygen attack was more severe during the cyclic oxidation than the isothermal procedure. Kinetics of the... 

In this work, the group contribution approach has been used in combination with the linear isotherm regularity (LIR) equation of state to estimate pvT properties of primary, secondary and tertiary alcohols, ketones and 1-carboxylic acid. In addition, the isothermal compressibility and thermal expansion coefficient of these compounds have been predicted. We assume each of these organic compounds as a hypothetical mixture of methyl, methylene and a functional group, in which the interaction potential of each pair is assumed to be the average effective pair potential. Then, the LIR equation of state (EOS) has been extended to such a hypothetical mixture. Three basic compounds, namely propane,... 

Preparation and evaluation of chitosan-coated eggshell (CTS-ES) particles as a biosorbent for removal of Cu(II) ions from aqueous media was considered in this research. For this purpose, chitosan was coated on eggshell (ES) particles through precipitation procedure. The coated particles were characterized by Fourier transform infrared, thermogravimetric analysis, and field emission scanning electron microscopy analysis. Kinetic studies showed that coating of chitosan on ES particles improved their Cu(II) adsorption capacity. The removal of Cu(II) ions by either ES or CTS-ES particles followed the pseudo-second-order kinetics, indicating that chemical sorption is the rate-limiting step for... 

In this article, adsorption of p-xylene, m-xylene, o-xylene, and ethylbenzene on Na-BETA type zeolite in liquid phase at 15, 25, and 35 °C has been studied and the single adsorption isotherms have been obtained and reported. The Langmuir isotherm model was used to describe the experimental adsorption isotherm data. It was found that p-xylene is more strongly adsorbed component followed by ethylbenzene, m-xylene and o-xylene. This means that this adsorbent is selective for p-xylene. Using Langmuir isotherm model, the saturation adsorption capacities of the adsorbent were obtained as follows 143 mg/g for p-xylene, 105 mg/g for ethylbenzene, 83 mg/g for m-xylene, and 68 mg/g for o-xylene at 25... 

Magnetic nanocomposite hydrogels containing different amounts of graphene oxide were synthesized and characterized by FTIR, XRD, TGA, SEM, TEM, VSM and UV-vis spectroscopy. The prepared hydrogels were used as adsorbents for removal of a cationic dye, crystal violet, from water. The kinetics and isotherm of adsorption and the effect of different experimental conditions such as graphene oxide content, pH of the solution, contact time, adsorbent dosage and initial dye concentration on adsorption capacity were then investigated. Parameters related to kinetics and isotherm models were calculated and discussed. It was found that adsorption is well-described by pseudo-second-order kinetics and... 

Activated carbon beds are extensively used in sweetening units of natural gas refineries for the purification of contaminated amine solutions. Correlation of experimental adsorption data using an analytical isotherm equation is need to design an accurate activated carbon bed. In the present study, the adsorption of BTEX from Diethanolamine (DEA) solution by commercial and granular activated carbon (AC) were performed. The Langmuir, Freundlich and Sips isotherm models were used to describe the equilibrium data. The accuracy of the results obtained from the adsorption isotherm models was compared and the values for the regressed parameters were reported. The results show that the Freundlich... 

A new magnetic nano-adsorbent was synthesized via the radical polymerization of methyl acrylate on modified Fe3O4 nanoparticles, followed by its functionalization by amidation of the methyl ester groups using pentaethylenehexamine, to create active adsorption sites for removing anionic dyes from aqueous media. Physicochemical properties of the adsorbent were then characterized by SEM, TEM, XRD, FTIR, TGA and CHN analysis. The prepared nanocomposite was used as adsorbent for the removal of anionic dyes, naphthol green B and chromeazurol S, from aqueous solution and assessed in view of the kinetics and isotherm adsorption, and the effect of solution pH, contact time and initial dye... 

The functionalized copper oxide–zinc oxide nanocomposite (FCZN) was synthesized and characterized using Fourier transform infrared, scanning electron microscopy, X-ray diffraction, X-ray fluorescence, and BET. Dye removal from aqueous solution was done in a batch system using FCZN as an adsorbent. The effects of adsorbent dosage, initial dye concentration, pH, temperature, and additive salts on dye removal were investigated. Isotherms, kinetics, and thermodynamics of dye adsorption were studied. Equilibrium and kinetic data were fitted by Langmuir isotherm and pseudo-second-order kinetic, respectively. The thermodynamic data showed that dye adsorption was spontaneous, endothermic, and... 

This work presents the results of numerical simulation of liquid flow on a static bubble. Velocity and surfactant concentration profiles of the liquid around a bubble exposed in flow field were estimated via unsteady CFD solution. Governing equations are the Navier-Stokes and conservation of mass in the liquid bulk and at the interface. Resulted profiles of surfactant concentration and velocity in the liquid bulk are used to determine the dynamic surface tension data via two adsorption isotherms of Langmuir and Frumkin. Data of dynamic surface tension were validated via experimental data of “bubble in flow field” protocol. Surface concentrations of surfactants were also numerically... 

Despite numerous experimental and modeling studies, the role of temperature changes on phase behavior modeling of asphaltene precipitation and, in consequence, developing of asphaltene phase envelope in heavy crudes, remains a topic of debate in the literature. In this work, a computer code based on the non-isothermal improved solid model has been developed and used for predicting asphaltene precipitation data for one of the Iranian heavy crudes at different levels of temperature and pressure. The parameters of the non-isothermal model were tuned using three onset pressures at three different temperatures, and the asphaltene phase envelope was developed. The results showed that at high... 

Manufacturing of complex-shaped bimetals utilizing two-color powder injection molding (2C-PIM) and three-dimensional printing (3DP) processes, which basically involve sintering of a powder/binder mixture, has been attracted a great interest. This article addresses sintering of biocompatible Co-Cr-Mo alloy for manufacturing stepwise porosity-graded composite structures. Such composite structures provide strength at the core and a porous layer for the tissue growth. To evaluate the process, two grades of gas atomized Co-Cr-Mo powder with an average particle size of 19 and 63 μm were used. Isothermal and non-isothermal sintering behavior of the loose powders under hydrogen and argon... 

A fundamental chemical enhanced oil recovery (EOR) process is surfactant flooding in which the key mechanism is to reduce interfacial tension between oil and the displacing fluid and hence mobilizing the trapped oil. Surfactant loss by adsorption is one of the most important criteria that governs the economics of the surfactant flooding methods. In addition to this, detrimental effects and high price of currently used surfactants cause EOR process so expensive and unfeasible. This study is aimed to introduce a novel kind of plant based surfactant which is extracted from Zizyphus Spina-Christi tree. In addition, equilibrium adsorption behavior of this novel biosurfactant in aqueous solution... 

Analytical solution of shock wave propagation in pure gas in a shock tube is usually addressed in gas dynamics. However, such a solution for granular media is complex due to the inclusion of parameters relating to particles configuration within the medium, which affect the balance equations. In this article, an analytical solution for isothermal shock wave propagation in an isotropic homogenous rigid granular material is presented, and a closed-form solution is obtained for the case of weak shock waves. Fluid mass and momentum equations are first written in wave and (mathematical) non-conservation forms. Afterwards by redefining the sound speed of the gas flowing inside the pores, an... 

In this study, kinetics, equilibrium, and mechanisms of SDBS adsorption onto carbonate rock in presence/absence of alkaline/electrolyte, which is not well discussed in the available literature, is analyzed through batch experiments. Analysis of kinetic data showed that adsorption rate of SDBS onto carbonate is controlled by both boundary layer and intraparticle diffusion, also adsorption kinetics meets pseudo second-order model. The coefficient of kinetic model is a linear function of initial and equilibrium concentrations. The adsorption isotherm experiences four distinct regions, with a rising trend in the first regions until reaching to a maximum after which decreases slightly, as the... 

In this study, kinetics, equilibrium, and mechanisms of SDBS adsorption onto carbonate rock in presence/absence of alkaline/electrolyte, which is not well discussed in the available literature, is analyzed through batch experiments. Analysis of kinetic data showed that adsorption rate of SDBS onto carbonate is controlled by both boundary layer and intraparticle diffusion, also adsorption kinetics meets pseudo second-order model. The coefficient of kinetic model is a linear function of initial and equilibrium concentrations. The adsorption isotherm experiences four distinct regions, with a rising trend in the first regions until reaching to a maximum after which decreases slightly, as the... 

In transient liquid phase (TLP) bonding for commercial applications, one of the important key parameters is the holding time required for complete isothermal solidification tIS, which is a prerequisite for obtaining a proper bond microstructure. The objective of the study is to analyse the isothermal solidification kinetics during TLP bonding of cast IN718 nickel based superalloy. Experiments for TLP bonding were carried out using a Ni-7Cr-4.5Si-3Fe-3.2B (wt-%) amorphous interlayer at several bonding temperatures (1273-1373 K). The time required to obtain TLP joints free from centreline eutectic microconstituents was experimentally determined. Considering the solidification behaviour of... 

A simple equation of state (EoS) has recently been introduced (J. Phys. Chem. B2009, 113, 11977-11987) as (Z - 1)v2 = e + f/ρ + gρ2, where Z ≡ pv/RT is the compressibility factor, v = 1/ρ is molar volume, and e, f, and g are temperature dependent parameters. This EoS has been found to be accurate for all types of nano and bulk solids and bulk fluids, in the entire temperature and pressure ranges for which experimental data are reported, except for the isotherms within 1 ≤ T r = T/Tc ≤ 1.1 for the spherical and near spherical species and for a wider temperature range for the cylindrical molecules. The aim of this work is to investigate the validity of a three-term expression similar to the...