Sharif Digital Repository

This paper presents the experimental results of impulsive waves caused by subaerial landslides. A wide range of effective parameters are considered and studied by performing 120 laboratory tests. Considered slide masses are both rigid and deformable. The effects of bed slope angle, water depth, slide impact velocity, geometry, shape and deformation on impulse wave characteristics have been inspected. The impulse wave features such as amplitude, period and also energy conversation are studied. The effects of slide Froude number and deformation on energy conversation from slide into wave are also investigated. Based on laboratory measured data an empirical equation for impulse wave amplitude... 

This paper presents a new landslide-generated wave (LGW) model based on incompressible Euler equations with Savage-Hutter assumptions. A two-layer model is developed including a layer of granular-type flow beneath a layer of an inviscid fluid. Landslide is modeled as a two-phase Coulomb mixture. A well-balanced second-order finite volume formulation is applied to solve the model equations. Wet/dry transitions are treated properly using a modified non-linear method. The numerical model is validated using two sets of experimental data on subaerial and submarine LGWs. Impulsive wave characteristics and landslide deformations are estimated with a computational error less than 5 %. Then, the... 

This paper represents a numerical study on the effects of landslide initial submergence and its geotechnical and rheological properties on the characteristics of landslide-generated waves (LGWs) and landslide deformation. A number of 117 numerical experiments are performed using a two-layer Coulomb Mixture Flow (2LCMFlow) model on a real-sized numerical flume as a simplified cross section of the Maku dam reservoir, located in the Northwest of Iran. Three different initial locations are considered for landslide representing a subaerial (SAL), a semi-submerged (SSL), and a submarine (SML) landslide. Based on the numerical results, the majority of SMLs and in some cases SSLs generate tsunami... 

Various approaches have been developed by researchers to predict earthquake induced landslide displacements. This study evaluates the applicability of these approaches on sandy slopes. For this purpose, nine physical models are constructed inside a rigid box and thirty-six shaking table tests are conducted. Dynamic responses are then converted to the full scale model by applying similitude laws. Five statistical criteria are applied to compare the measured and predicted displacements and evaluate the precision of the approaches. By combining the outcomes and using a scoring procedure, the approaches are scored. Consequently, the approaches of Fotopoulou and Pitilakis [23] and Hsieh and Lee... 

Underwater landslide can trigger impulsive waves with high amplitude and run-up, which may cause substantial damage. In this work, the experimental investigations are performed to study the impulsive wave characteristics caused by underwater landslides. The effects of landslide geometry and kinematics on wave characteristics are studied by performing 84 laboratory experiments. The influences of thickness, volume and shape of failure mass on the characteristics of initial wave are discussed. The impacts of water body conditions such as the slope of sliding bed and the initial submergence of underwater landslide are also examined. The present experimental data as well as the available data in... 

This paper presents a new landslide-generated wave (LGW) model based on incompressible Euler equations with Savage-Hutter assumptions. A two-layer model is developed including a layer of granular-type flow beneath a layer of an inviscid fluid. Landslide is modeled as a two-phase Coulomb mixture. A well-balanced second-order finite volume formulation is applied to solve the model equations. Wet/dry transitions are treated properly using a modified non-linear method. The numerical model is validated using two sets of experimental data on subaerial and submarine LGWs. Impulsive wave characteristics and landslide deformations are estimated with a computational error less than 5 %. Then, the... 

This paper represents a numerical study on the effects of landslide initial submergence and its geotechnical and rheological properties on the characteristics of landslide-generated waves (LGWs) and landslide deformation. A number of 117 numerical experiments are performed using a two-layer Coulomb Mixture Flow (2LCMFlow) model on a real-sized numerical flume as a simplified cross section of the Maku dam reservoir, located in the Northwest of Iran. Three different initial locations are considered for landslide representing a subaerial (SAL), a semi-submerged (SSL), and a submarine (SML) landslide. Based on the numerical results, the majority of SMLs and in some cases SSLs generate tsunami... 

This paper studies the influence of burial depth on slope response and pipe performance under earthquake induced landslide. Three physical models are constructed and tested using 1 g shaking table device. The slope is divided into four sections as toe, lower and upper sections of the slope face and crest. The pips which perpendicularly cross the slope are embedded at these positions in three burial depths to demonstrate burial depth effect in each section. According to the experiments, dynamic slope response which moderately develops at deeper depths at toe and lower section, displays a clear downtrend at upper section and crest. Also, the pipe response depends on pipe route and slope... 

Laboratory investigations have been performed on the submarine landslide generated waves by performing 120 laboratory tests. Both rigid and deforming-slide masses are considered. The effects of bed slope angle, initial submergence, slide geometry, shape and deformation on impulse wave characteristics have been inspected. Impulse wave amplitude, period, energy and nonlinearity are studied in this work. The effects of bed slope angle on energy conversion from slide into wave are also investigated. Laboratory-based prediction equations are presented for impulse wave amplitude and period in near and far-field and are successfully verified using the available data in previous laboratory and... 

Power systems are stretched across thousands of miles of diverse territories, often in remote locations, to generate and transfer the energy to geographically dispersed customers. The system is therefore subjected to a wide range of natural hazards which could potentially damage critical system components and cause interruption of electricity supply in some areas. To improve system resilience against natural hazards, management frameworks are required to identify hazardous areas and prioritize reinforcement activities in order to take the most out of the limited resources.Landslide is a natural disaster that involves the breakup and downhill flow of rock, mud, water, and anything caught in... 

In this work, a two-dimensional fourth-order Boussinesq-type numerical model is applied to estimate the impact of landslide-generated waves in dam reservoirs. This numerical model has recently been extended for simulating subaerial landslides. The extended model is validated using available three-dimensional experimental data, and a good agreement is obtained. The numerical model is then employed to investigate the impact of landslide-generated waves in two real cases, the Maku and Shafa-Roud dam reservoirs in the northwestern and the north of Iran, respectively. Generated wave heights, wave run-up, maximum wave height above dam crest, and dam overtopping volume have been estimated for each... 

Impulsive water waves generated by landslides impose severe damage on coastal areas. Very large mass ows in the ocean can generate catastrophic tsunamis. Preventing damage to dams and coastal structures, and saving the lives of local people against landslide-generated waves, has become an increasingly important issue in recent years. Numerical modeling of landslide-generated waves is a challenging subject in CFD. The reason lies in the difficulty of determining the interaction between the moving solids and sea water, which causes complicated turbulent regimes around the moving mass and at the water surface. Submarine or aerial types of landslide can further complicate the problem. Up to now,... 

Landslides have disastrous influence on buried pipeline operation. In order to overcome this phenomenon, many retrofitting solutions have been proposed in literature and practice. This paper concentrates on the solutions which deal with pipe thickness change and rerouting method. As an answer to this,ABAQUS FE program has been used for numerical modeling. Soil-pipe interaction was modeled as hard and frictional contact in normal and tangential directions respectively. Typical geotechnical parameters of Tehran soil and predicted acceleration time history, compatible with Tehran geological condition, have been introduced to program for numerical calculations. Usefulness of two basic proposed... 

The land-sliding forces applied to buried pipelines depend on the ground condition, types of loading and pipelines features. This paper intends to numerically investigate the effect of ground condition on pipelines. The loading type and pipeline features are kept constant. The pipeline which is positioned at mid-length of the slope, is made of steel and intersects the slope at the angle of 90o. The slope material specifications are determined based on geotechnical reports andthe harmonic loading simulates a 7.5 magnitude earthquake. The descending trend of slope displacement in sandy clay, loose to medium sand, cemented sand and medium to hard clayare shown by numerical calculations. But,... 

The land-sliding forces applied to buried pipelines depend on the ground condition, types of loading and pipelines features. This paper intends to numerically investigate the effect of ground condition on pipelines. The loading type and pipeline features are kept constant. The pipeline which is positioned at mid-length of the slope, is made of steel and intersects the slope at the angle of 90o. The slope material specifications are determined based on geotechnical reports andthe harmonic loading simulates a 7.5 magnitude earthquake. The descending trend of slope displacement in sandy clay, loose to medium sand, cemented sand and medium to hard clayare shown by numerical calculations. But,... 

A two-dimensional depth-integrated numerical model is developed using a fourth-order Boussinesq approximation for an arbitrary time-variable bottom boundary and is applied for submarine-landslide-generated waves. The mathematical formulation of model is an extension of (4,4) Padé approximant for moving bottom boundary. The mathematical formulations are derived based on a higher-order perturbation analysis using the expanded form of velocity components. A sixth-order multi-step finite difference method is applied for spatial discretization and a sixth-order Runge-Kutta method is applied for temporal discretization of the higher-order depth-integrated governing equations and boundary...