Sharif Digital Repository

Free vibration of multilayered composite cylinder which volume fraction of fiber varies according to power law in longitudinal direction has been studied. Rule of mixture model and reverse of that are employed to represent elastic properties of this fibrous functionally graded composite. Straindisplacement relations employed are based on Reissner- Naghdi-Berry's shell theory. The displacement finite element model of the governing equations of motion is derived by writing weak form of them. The Lagrangian shape functions for in-plane displacements and Hermitian shape functions for displacement in normal direction to the surface of mid-plane are utilized by defining a conformal quadrilateral... 

The effect of tungsten and nitrogen on the as cast and the creep aged microstructures of heat resistant HP-Nb steel was studied. The steel was directionally solidified under two cooling rates of 31.2 and 7.6 K sec-1. Creep rupture tests were performed at temperatures of 1150-1255 K on the specimens prepared from the cast ingots in transverse and longitudinal directions. It is shown that the addition of nitrogen significantly increases the eutectic temperature and thus refines the dendrites and alters the morphology of M7C3 eutectic carbide. Also, it is found that due to short time aging, nitrogen addition decreases the M7C3 carbide fragmentation, increases the secondary M23C6 precipitation... 

In the present investigation, the buckling of generally laminated conical shells with various boundary conditions subjected to axial pressure is studied using an analytical approach. The governing equations are obtained using classical shell theory with Donnell assumptions in strain–deformation relations and the principle of minimum potential energy. The differential equations are solved using trigonometric functions in circumferential and power series in longitudinal directions. All types of boundary conditions can be applied in this method. The results are compared and validated with the results available in the literature, and good agreement is observed. Finally, the effects of the... 

The alkaline treatment condition plays a crucial role in governing the ultimate properties of flax fibers. In this study, flax fibers were modified with mild alkalization and severe mercerization conditions to give fundamental insight into how the molecular-scale changes in cell wall fine structure and cellulose supramolecular structure can affect the macroscopic properties of fibers. SEM, FTIR, XRD, TGA, and DSC techniques were employed to characterize the variations in morphology, composition, crystalline structure, and thermal properties of fibers. Also, tensile tests evaluated their reinforcing performance in polypropylene-based composites. The results indicated that alkalization in 5%... 

Most of the studies related to the modeling of masonry structures have by far investigated either the in-plane (IP) or the out-of-plane (OP) behavior of walls. However, seismic loads mostly impose simultaneous IP and OP demands on load-bearing or shear masonry walls. Thus, there is a need to reconsider design equations of unreinforced masonry walls by taking into account bidirectional effects. The intent of this study is to investigate the bidirectional behavior of an unreinforced masonry wall with a typical aspect ratio under different displacement-controlled loading directions making use of finite element analysis. For this purpose, the numerical procedure is first validated against the... 

Liquefaction-induced lateral spreading has imposed severe damages to many important structures supported on pile foundations during past earthquakes. As a result, evaluation of pile response to lateral spreading is an important step towards safe and resistant design of pile foundations against this destructive phenomenon. Current paper aims to study the response of a group of piles subjected to liquefaction-induced lateral spreading using a large scale 1-g shake table test. General test results including time-histories of accelerations, pore water pressures, displacements and bending moments are presented and discussed in this paper. In addition, distribution of lateral soil pressure on... 

This paper studies the output voltage from a novel inertial energy harvester using magnetic shape memory alloys (MSMAs). The MSMA elements are attached to the root of a cantilever beam by means of two steps. In order to get electrical voltage, two coils are wound around the MSMAs and a shock load is applied to a tip mass at the end of the beam to have vibration in it. The beam vibration causes strain in the MSMAs along their longitudinal directions and as a result the magnetic flux alters in the coils. The change of magnetic flux in the surrounding coil produces an AC voltage. In order to predict the output voltage, the nonlinear governing equations of beam motion based on Euler-Bernoulli... 

The effect of welding current and polarity, i.e. AC and DCEN, on imposed thermal cycles, mechanical properties, microstructural events and residual stresses was investigated in GTA welding of AA5052. A three-dimensional thermo-mechanical model was utilized to evaluate thermal responses and residual stresses distribution in the weldments. Tensile testing and hardness measurements were also conducted to study the effect of welding polarity on the mechanical properties of components. Microstructural observations utilizing optical microscopy were carried out to assess the microstructural evolutions. The results show that wide varieties of microstructures are produced in DCEN sample from cells at... 

In this paper, the buckling analysis of a multilayered composite cylindrical shell which volume fraction of its fiber varies according to power law in longitudinal direction, due to applied compressive axial load is studied. Rule of mixture model and reverse of that are employed to represent elastic properties of this fiber reinforced functionally graded composite. Strain displacement relations employed are based on Reissner-Naghdi-Berry's shell theory. The displacement finite element model of the equilibrium equations is derived by employing weak form formulation. The Lagrangian shape function for in-plane displacements and Hermitian shape function for displacement in normal direction to... 

This paper describes methods used for determining the characteristic acoustic modes and frequencies of a liquid-propellant rocket-motor combustion chamber and effects of radial baffles on the chamber's acoustic field. A multi-point sensing experimental setup, including stationary and moving sensors, was used to measure characteristic frequencies and mode shapes of a combustion chamber. A new technique based on the comparison of signal phase angles from stationary sensors to that of a moving sensor was used to map complex characteristic mode shapes of a combustor. A three-dimensional Helmholtz acoustic solver was also developed using an efficient finite volume approach for complex geometries... 

Density Current is formed when a fluid with heavier density than the surrounding fluid flows down an inclined bed. These types of flows are common in nature and can be produced by; salinity, temperature inhomogeneities, or suspended particles of silt and clay. Driven by the density difference between inflow and clear water in reservoirs, density current plunges clear water and moves towards a dam, while density current flows on a sloping bed. The vertical spreading due to water entrainment has an important role in determining the propagation rate in the longitudinal direction. In this work, two-dimensional steady-state salt solutions' density currents were investigated by means of...