Sharif Digital Repository

We have compared the electrical and magnetic properties of Ru(Gd 1.5-x Pr x )Ce 0.5Sr 2Cu 2O 10-δ (Pr/Gd samples) with x = 0.0, 0.01, 0.03, 0.033, 0.035, 0.04, 0.05, 0.06, 0.1 and RuGd 1.5(Ce 0.5-x Pr x ) Sr 2 Cu 2O 10-δ (Pr/Ce samples) with x = 0.0, 0.01, 0.03, 0.05, 0.08, 0.1, 0.15, 0.2 prepared by the standard solid-state reaction technique. We obtained the XRD patterns for different samples with various x. The lattice parameters versus x for different substitutions have been obtained from Rietveld analysis. To determine how the magnetic and superconducting properties of these layered cuprate systems can be affected by Pr substitution, the resistivity, and magnetoresistivity, with H ext... 

The aim of this paper was to improve the magnetic properties of magnetoplumbite-type (M-type) strontium hexaferrite substituted with Co 2+-La3+ produced by conventional ceramic forming techniques. The effect on the magnetic properties of varying the composition of the target compound Sr1-xLaxFe12-yCo yO19 and the primary and secondary firing temperatures was investigated. Microstructure studies and XRD phase analysis indicated that optimum values of the remanent magnetization Br and coercive field Hcj were obtained with a primary firing temperature of 1240 C and a final firing temperature of 1180 C, where (x=y)th 1=0.15, (y/x)exp 2=0.75 and the molar ratio of ferric oxide to strontium... 

In this study, the kinetics of nanocrystallization of amorphous Fe 73.5Si13.5B9Nb3Cu1 (F1) and Fe77Si11B9Nb2.4Cu0.6 (F2) alloys is investigated. The microstructure and magnetic properties of the nanocrystalline alloys are compared. The crystallization temperature of F2 alloy is shifted towards lower temperatures with respect to F1. Thus, the crystalline volume fraction and the crystalline grain size at specific annealing temperature for the F2 alloy are higher than for the F1 alloy, accounting for the higher coercive force of F2 alloy with respect to the one of F1 alloy. According to isoconversional methods, the activation energy for crystallization is variable as a function of transformed... 

In present research, nanocrystalline Fe100-xSix (x = 6.5, 10, 13.5, 20 and 25 at.%) and Fe83.5Si13.5Nb3 alloy powders were prepared by mechanical alloying using high-energy ball milling. The resulting powders mainly consist of micron-sized particles with an average grain size of less than 20 nm. According to the XRD test results, by increasing the milling time and/or the Si content the lattice parameter decreases and the internal microstrain increases. In addition, the specific saturation magnetization diminishes as Si content increases. The coercive forces of the as-milled nanocrystalline powders are much higher than those of corresponding Fe-Si bulk alloys with a minimum at 13.5 at.% Si.... 

Due to the necessity for methods that are able to handle complexities of systems, use of Method Engineering (ME) to construct more adaptable and flexible methods has become of importance. Assemblybased approach is the most well-known approach of ME that performs method construction by reusing and assembling different method fragments. This approach, like other approaches of ME, suffers from the lack of suitable guidelines. In this way, architecture-centric method engineering (ArCME) is a new approach which aims at performing ME processes in a more disciplined and cohesive way. In this paper, process of assemblybased ME is enhanced by ArCME. Furthermore, benefits of implementing the process... 

In this work, milled Nd12.8Fe79.8B7.4-type powders with three different oxygen contents were processed into sintered anisotropic magnets via a standard powder metallurgy technique. Minimizing the oxygen content within the powder material, resulted in an almost full densification in the sintered magnets even at the lower end of the sintering temperature limit. Under this condition, the amount of hard magnetic Φ phase (Nd2Fe14B) was maximized in the structure of sintered bodies, which resulted in the highest energy density [BHmax] values. In the sintered magnets made from the powder with a higher oxygen content, full densification could only be obtained at the upper end of the sintering... 

In order to provide sufficient heat without overheating healthy tissue in magnetic fluid hyperthermia (MFH), a careful design of the magnetic properties of nanoparticles is essential. We perform a systematic calculation of magnetic properties of Ni-alloy nanoparticles. Stoner-Wohlfarth model based theories (SWMBTs) are considered and the linear response theory (LRT) is used to extract the hysteresis loop of nickel alloy nanoparticles in alternating magnetic fields. It is demonstrated that in the safe range of magnetic field intensity and frequency the LRT cannot be used for the calculation of the area in the hysteresis for magnetic fields relevant for hyperthermia. The best composition and... 

Properties of FeCo nanocrystalline intermetallic powders prepared by salt-matrix hydrogen reduction of a milled Fe 2O 3-Co 3O 4 mixture were investigated. The product of 72 ks ball-milling at 350 rpm was CoFe 2O 4 nanopowder. Reduction of this powder for 3.6 ks by hydrogen at 750 °C resulted in the formation of Fe 0.67Co 0.33 stoichiometric compound. Scanning electron microscopy, electron dispersive spectrometry, X-ray diffraction and vibrating sample magnetometry were used to characterize the nanopowder. Using a salt-matrix (NaCl as a dispersion medium) resulted in the decrease of the reduction temperature and improvement of the morphology and magnetic properties of the nanopowder.... 

Finemet soft magnetic alloy has been in the focus of interest in the last years due to its high saturation magnetization, high permeability and low core loss. The great quantity of papers has been devoted to the study of its structural and magnetic properties, confirms this claim. This paper reviews the different researches performed on Finemet up to now. The criteria that should be satisfied in order to have the high glass forming ability in an alloy and also the techniques applied for production of Finemet ribbons, powders and bulk samples have been explained. In addition, the mechanism of devitrification, nanocrystallization and magnetic softness in this applicable magnetic alloy has been... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

Most recent findings on structural and magnetic properties of Fe-Ni-Co nano-powders produced by mechanical alloying and subsequent low-temperature hydrogen reduction are presented in this paper. At 300 rpm, with ball to powder weight ratio of 20, single phase nickel-cobalt ferrite is mechanically synthesized for 50 h. The as-milled powder is then subjected to 1 h hydrogen reduction at 700 °C. Hydrogen reduction results in the formation of Fe-16.5%Ni-16.5%Co nano-powders. The phases of the powders are identified by X-ray diffraction (XRD) utilizing Cu Kα radiation. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) are used to study the morphology and the average... 

In this study, internal microstrain of an iron-resin composite produced by powder metallurgy has been calculated using the Williamson-Hall method. The effects of microstrain evolution during different processing conditions on magnetic properties such as coercive force and hysteresis loss have been investigated. The results show that there are regular and similar changes of coercivity and hysteresis loss. Both of these properties are directly dependant on the pinning effect of the internal microstrain against the movement of magnetic domain walls during magnetization process. © 2006 Elsevier B.V. All rights reserved  

The single-domain particles, especially FeCo fine particles have many applications in magnetic information technology. We have prepared Fe 1-xCox fine particles for different x by borohydride method and measured the magnetic and structural properties of the samples. We have then determined the variations of coercivity and anisotropy energy versus x in Fe1-xCox fine particles. The obtained results have been analyzed on the basis of various magnetic anisotropies. Magnetic anisotropies affect the coercivity of the medium for each x as follows: shape and crystal anisotropies for x=0, surface and crystal anisotropies for x=1, shape, induced and crystal anisotropies for x=0.3 and 0.5, and shape... 

In this study, maghemite (γ-Fe2O3) nanoparticles were produced using gelatin protein as an effective mediator. Size, shape, surface morphology and magnetic properties of the prepared γ-Fe2O3 nanoparticles were characterized using XRD, FT-IR, TEM, SEM and VSM data. The effects of furnace temperature and time of heating together with the amount of gelatin on the produced gelatin-Fe3O4 nanocomposite were examined to prove the fundamental effect of gelatin; both as a capping agent in the nanoscale synthesis and as the director of the spinel γ-Fe2O3 synthesis among possible Fe 2O3 crystalline structures  

The acetylation of phenols with acetic anhydride proceeded in excellent yields when it was catalyzed by gadolinium triflate immobilized on magnetically recyclable nanocomposites. This heterogeneous catalyst provided high catalytic activity with low loading level (1 mol%), because the Lewis acid catalyst was grafted on the surface of the nanocomposites. The catalysts were also easily recovered from the reaction mixture using a magnet and reused for six consecutive cycles