Sharif Digital Repository

A magnetically recyclable vanadium(V) catalyst was synthesized by covalent anchoring of VO(salen)Cl on silica-coated Fe 3O 4 nanoparticles. This straightforward preparation yields magnetically separable Fe 3O 4@SiO 2@VO(salen) nanoparticles with high vanadium loading. These nanoparticles were efficient catalysts for selective oxidation of sulfides to corresponding sulfoxides with urea hydrogen peroxide in excellent yields. Leaching and recycling experiments revealed that the nanocatalyst can be applied for nearly complete oxidation of sulfides for at least five successive cycles  

A manganese(III) complex, [Mn(phox)2(CH3OH) 2]ClO4 (phox = 2-(2′-hydroxyphenyl)oxazoline), was immobilized on silica-coated magnetic Fe3O4 nanoparticles through the amino propyl linkage using a grafting process in dichloromethane. The resulting Fe3O4@SiO2-NH2@Mn(III) nanoparticles are used as efficient and recyclable catalysts for selective oxidation of thiols to disulfides using urea-hydrogen peroxide as the oxidant. The nanocatalyst was recycled several times. Leaching and recycling experiments revealed that the nanocatalyst can be recovered, recycled, and reused more than five times, without the loss of catalytic activity and magnetic properties. The recycling of the nanocatalyst in six... 

Superparamagnetic ZnFe2O4/reduced graphene oxide (rGO) composites containing ZnFe2O4 nanoparticles (with ∼5-20 nm sizes) attached onto rGO sheets (with ∼1 μm lateral dimensions) were synthesized by hydrothermal reaction method. By increasing the graphene content of the composite from 0 to 40 wt%, the size as well as the number of the ZnFe2O4 nanoparticles decreased and the saturated magnetization of the composites reduced from 10.2 to 1.8 emu/g, resulting in lower responses to external magnetic fields. Concerning this, the time needed for 90% separation of ZnFe2O4/rGO (40 wt%) composite from its solution (2 mg/mL in ethanol) was found 60 min in the presence of an external magnetic field (∼1... 

A heterogeneous magnetic copper catalyst was prepared via anchoring of copper sulfate onto multi-layered poly(2-dimethylaminoethyl acrylamide)-coated magnetic nanoparticles and was characterized using various techniques. The catalyst was found to be active, effective and selective for one-pot three-component reaction of alkyl halide, sodium azide and alkyne, known as copper-catalyzed click synthesis of 1,2,3-triazoles. As little as 0.3 mol% of catalyst was found to be effective under the optimum conditions. The catalyst could also be recycled and reused up to seven times without significant loss of activity. Thermal stability, high loading level of copper on catalyst, broad diversity of... 

An efficient protocol was developed for the nano CoCuFe2O4-catalyzed C-N and C-S bond formation. By this catalytic system, both amine and sulfide-based structural motifs were formed efficiently in aryl halide-free route. The amination reaction of phenyl boronic acid with various types of amines was conducted under ligand-free conditions, in ethanol as a green solvent at 60°C. Unsymmetrical diaryl/aryl alkyl sulfide synthesis via the coupling reaction of arylboronic acids with thiols was also conducted. The nano cobalt-copper ferrite was used as a heterogenous efficient, inexpensive, magnetically separable and recyclable catalyst that can be used for several cycles. © 2018 John Wiley & Sons,... 

We report a facile method to synthesize a magnetically separable Pd-rGO/CNT/CaFe2O4 photocatalyst. The incorporation of CNTs into rGO can form a conductive network structure to bridge the gaps between rGO sheets. This conductive network can prevent the restacking of GO nanosheets during the reduction process. Also, for photocatalysis, the aforementioned conjugated network can provide rapid electronic conducting channels. It was found that the Pd-rGO/CNT/CaFe2O4 nanocomposite is an efficient photocatalyst for the Heck-Mizoroki coupling reaction under irradiation of visible light. Interestingly, the electrons which are excited by the photons can be transferred to the palladium nanoparticles... 

An attempt was made to produce an iron bearing and a titanium bearing product, using solid state reduction of Fanouj mine titanomagnetite concentrate. For this purpose, the concentrate was mixed with pulverised coal and sodium carbonate and was reduced in a muffle furnace. The product was then subjected to magnetic separation. In this work, the effect of temperature, time, added coal and additive amount on reduction was studied. The Separation Efficiency (SE) index was used for optimisation of the process. Using SE is more appropriate than degree of metallization, which is usually used, for optimising reduction processes. The results show that the optimal conditions are 1325°C, 2.5 h, 25... 

We report a facile method to synthesize a magnetically separable Pd-rGO/CNT/CaFe2O4 photocatalyst. The incorporation of CNTs into rGO can form a conductive network structure to bridge the gaps between rGO sheets. This conductive network can prevent the restacking of GO nanosheets during the reduction process. Also, for photocatalysis, the aforementioned conjugated network can provide rapid electronic conducting channels. It was found that the Pd-rGO/CNT/CaFe2O4 nanocomposite is an efficient photocatalyst for the Heck-Mizoroki coupling reaction under irradiation of visible light. Interestingly, the electrons which are excited by the photons can be transferred to the palladium nanoparticles... 

An attempt was made to produce an iron bearing and a titanium bearing product, using solid state reduction of Fanouj mine titanomagnetite concentrate. For this purpose, the concentrate was mixed with pulverised coal and sodium carbonate and was reduced in a muffle furnace. The product was then subjected to magnetic separation. In this work, the effect of temperature, time, added coal and additive amount on reduction was studied. The Separation Efficiency (SE) index was used for optimisation of the process. Using SE is more appropriate than degree of metallization, which is usually used, for optimising reduction processes. The results show that the optimal conditions are 1325°C, 2.5 h, 25... 

In this study, a new polymeric functionalized magnetic nanocatalyst containing a molybdenum Schiff base complex was prepared using a few consecutive steps. Poly (methylacrylate)-coated magnetic nanoparticles were synthesized via radical polymerization of methyl acrylate onto modified magnetic nanoparticles followed by the amidation of the methyl ester groups with hydrazine. Polymeric functionalization efficiently provides the advantage that more catalytic units can be grafted on the surface of magnetic nanoparticles. The functionalization process was continued with salicylaldehyde which introduced Schiff base groups on to the surface of the polymeric support. In the final step, the desired... 

Magnetic Fe3O4@SiO2 starch-graft-poly(acrylic acid) (SPAA) nanocomposite hydrogels were prepared and used as absorbents for removal of crystal violet from aqueous solutions. Dynamic swelling, effect of contact time, absorption kinetics and nanocomposite hydrogel mass for removal of crystal violet dyes from aqueous solutions were studied. Fourier transform infrared spectroscopy, scanning electron microscopy and vibrating sample magnetometer measurements were used for the characterization of the nanocomposite hydrogels. The nanocomposite hydrogels had high magnetic sensitivity under an external magnetic field, which allowed their magnetic separation from water, thus avoiding secondary... 

A molybdenum complex, [MoO2Cl2(DMSO)2], was immobilized on amino propyl and Schiff base modified magnetic Fe3O4@SiO2 nanoparticles by covalent linkage. The resulting nanoparticles were used as efficient and recyclable catalysts for the selective oxidation of sulfides to sulfoxides using urea hydrogen peroxide as the oxidant. The complete characterization of catalysts was carried out by means of thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), X-ray photoelectron spectroscopy (XPS), elemental analysis, FT-IR and Raman microprobe... 

A manganese porphyrin, meso-tetrakis(pentafluorophenyl)porphyrinato manganese(iii) acetate, Mn(TPFPP)OAc, was immobilized on silica-coated magnetic Fe3O4 nanoparticles functionalized with 3-aminopropyltriethoxysilane (APTS) through the amino propyl linkage using a grafting process in toluene solvent. This enabled the covalent immobilization of Mn(iii) porphyrin via an aromatic nucleophilic substitution reaction, to afford the Fe3O4@SiO2-NH2@MnPor catalyst. The resulting nanoparticles were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), FT-IR spectroscopy, UV-Vis spectroscopy, elemental analysis (CHN), atomic absorption spectroscopy (AAS), and vibrating... 

A novel and cost effective method of bio-separation developed recently is magnetic separation technology. In this study, super paramagnetic Fe3O4 nanoparticles are used for separation of bovine serum albumin (BSA) protein from plasma/serum samples at optimized conditions. The synthesis of chitosan hydrogel networks by two variant approaches that involve (1) crosslinking of chitosan with formaldehyde and (2) formation of carboxy methyl chitosan mediated complex, was investigated and the percent of gelation, swelling ratio and equilibrium water content were calculated. The results revealed the formation of better quality hydrogel from the first approach. In step 1, to quantify the BSA... 

This research aims to expand the body of information that researchers require before starting electronic waste (E-waste) recovery experiments. With this purpose, the basic metal contents, alkalinity, polymer components, iron magnetic separation, metal recovery priority and economic values of different types of waste printed circuit boards (PCBs) were investigated. The selected wastes were computer PCBs (CPCBs), CPCBs with wires, mobile phone PCBs (MPPCBs), television PCBs (TVPCBs), fax machine PCBs (FPCBs), copy machine PCBs (COPCBs) and central processing units (CPUs). These E-wastes were prepared in the three fraction sizes of F1<1 mm, 1 < F2<3 mm, and 3 < F3<8 mm to evaluate the metal... 

Porous carbon (PC) material was prepared from the carbonization of pomegranate peel waste. Subsequently, magnetically separable Fe3O4@PC was synthesized from Fe3O4 nanoparticles decorated on PC by the co-precipitation method of iron ions. Finally, Fe3O4@PC was successfully decorated with palladium nanoparticles in a simple route by reducing H2PdCl4 in the presence of sodium dodecylsulfate, which was used as both surfactant and reducing agent. Additionally, the effect of temperature on the carbonization process was studied. The Pd/Fe3O4@PC nanocomposite was used as an efficient and heterogeneous catalyst for Suzuki–Miyaura and Sonogashira cross-coupling reactions in an environmentally...