Sharif Digital Repository

Review of waste management models indicate that optimization models based on the chain of waste flow are developed and applied in waste management systems. These models do represent the flow of material through few stages and they lack an integrated approach that may include the flow of material from the point of waste generation in different sectors till the end point at the land fill. It is also argued that the existing models do rarely consider the interrelated issues of economics, environment and social aspects. This conclusion has been followed by the development of an integrated multi stage and multi period dynamic model of waste flow based on quasi dynamic optimization techniques. The... 

This paper develops methodology and technique tor the design, analysis, and impie mentation of an adaptive generalized predictive controller (AGPC) for Active Queue Management in TCP Networks. The TCP/AQM dynamic is modeled experimentally as a second-order system with a time delay where its parameters are estimated using the standard gradient algorithm. Based on this model, an AGPC is designed to gain the set-point tracking and robustness. AGPC, as a queue-based control mechanism, responds quickly to traffic changes, thus allowing for high utilization and small loss. We illustrate our results using ns-2 simulations and demonstrate the practical impact of adaptive model reference control on... 

Unpredictable occurrence of natural disasters in modern power systems has significantly increased the attentions to the outage management of multi-microgrid (MMG) systems. In this regard, a multi-objective two-stage outage management scheme is presented in this paper to protect undamaged microgrids (MGs) against load curtailment and minimize the curtailed loads simultaneously. Considering the importance of power system economic, this scheme is designed in a privacy-preserved transactive energy (TE) market and enables all MGs to participate in outage management voluntarily. In detail, a DC optimization is autonomously operated in the first stage in each MG to supply its demand loads. Then,... 

Aerial firefighting plays an integral role in containing wildfires, which have been growing rapidly in frequency and intensity over the past decades. However, the current aerial-resource management models were developed decades ago, based on the technology available then. This research aims to investigate how and what modern technologies can be integrated into aerial firefighting operation to help it keep up with the worsening situation. DSM has been used as an engineering tool to decompose the complex problem space into separate manageable segments. Using a task-based DSM, the interdependencies which give rise to unnecessary complexities are visualized, and the potential to integrate new... 

Successful design and implementation of knowledge management systems have been the main concern of many researchers. It has been reported that more than 50% of knowledge management systems have failed, therefore, it is required to seek for a new and comprehensive scientific approach to design and implement it. In the design and implementation of a knowledge management system, it is required to know 'what we want to achieve' and 'how and by what processes we will achieve it'. A literature review conducted and axiomatic design theory selected for this purpose. For the first time, this paper develops a conceptual design of knowledge management systems by means of a hierarchical structure,... 

In this paper, a wide area measurement, centralized, load frequency control using model predictive control (MPC) is presented for multi-area power systems. A multivariable constrained MPC was used to calculate optimal control actions including generation rate constraints. To alleviate computational effort and to reduce numerical problems, particularly in large prediction horizon, an exponentially weighted functional MPC was employed. Time-based simulation studies were performed on a three-area power system, and the results were then compared with decentralized MPC and classical PI controller. The results show that the proposed MPC scheme offers significantly better performance against load... 

Nowadays companies strive to survive in a competitive global environment. To speed up product development/modifications, it is suggested to adopt a collaborative product development approach. However, despite the advantages of new IT improvements still many CAx systems work separately and locally. Collaborative design and manufacture requires a product information model that supports related CAx product data models. To solve this problem many solutions are proposed, which the most successful one is adopting the STEP standard as a product data model to develop a collaborative CAx platform. However, the improvement of the STEP's Application Protocols (APs) over the time, huge number of STEP... 

One of the underlying factors in the conservation and development of urban green spaces is the available water resources use for green areas in each region. The primary purpose of this study is to introduce the integration of a proper simulation method for runoff along with AHP-PROMETHEE decision-making method for water resources management in urban basins. The application of this approach was investigated in the city Buin Zahra of Qazvin Province of Iran. In the first step by using the analytic hierarchy process (AHP), the available water resources in the case study were weighted. In the second step, the water resources of the municipal and residential wells and water collected by... 

One of the underlying factors in the conservation and development of urban green spaces is the available water resources use for green areas in each region. The primary purpose of this study is to introduce the integration of a proper simulation method for runoff along with AHP-PROMETHEE decision-making method for water resources management in urban basins. The application of this approach was investigated in the city Buin Zahra of Qazvin Province of Iran. In the first step by using the analytic hierarchy process (AHP), the available water resources in the case study were weighted. In the second step, the water resources of the municipal and residential wells and water collected by... 

Smart home is a small but an important energy segment that has a significant potential to implement authentic energy policies, where human is a major decision-maker in the home energy management dilemma. Therefore, humans’ emotions and tendencies plays a vital role as the End-User's daily decisions. In this paper, we develop a behavioral home energy management model based on time-driven prospect theory incorporating energy storage devices, distributed energy resources, and smart flexible home appliances. The conventional prospect theory is then modified by considering the psychological time discount effect in the value function. The non-flexible load and photovoltaic generation uncertainties... 

Predictive functional control (PFC) as a new active queue management (AQM) method in dynamic TCP networks supporting explicit congestion notification (ECN) is proposed. The ability of the controller in handling system delay along with its simplicity and low computational load makes PFC a privileged AQM method in the high speed networks. Besides, considering the disturbance term (which represents model/process mismatches, external disturbances, and existing noise) in the control formulation adds some level of robustness into the PFC-AQM controller. This is an important and desired property in the control of dynamically-varying computer networks. In this paper, the controller is designed based... 

This paper proposes a new energy management model for residential buildings to handle the uncertainties of demand and on-site PV generation. For this purpose, the building energy management system (BEMS) organizes a transactive energy (TE) market among plug-in electric vehicles (PEVs) to determine their charge/discharge scheduling. According to the proposed TE framework, the PEV owners get reimbursed by the BEMS for the flexibility they offer. In this regard, the PEV owners submit their response curves for reimbursement upon arrival. Then, the BEMS solves an optimization problem to maximize its own profit and determine the real-time TE market-clearing price. Afterward, based on the clearing... 

The purpose of this study is to apply managerial economics and methods of decision analysis to study the optimal pattern of innovation activities for development of new energy technologies in developing countries. For this purpose, a model of energy research and development (R&D) planning is developed and it is then linked to a bottom-up energy-systems model. The set of interlinked models provide a comprehensive analytical tool for assessment of energy technologies and innovation planning taking into account the specific conditions of developing countries. An energy-system model is used as a tool for the assessment and prioritization of new energy technologies. Based on the results of the... 

Strategic health, safety, and environmental management system (HSE-MS) involves systematic and cooperative planning in each phase of the lifecycle of a project to ensure that interaction among the industry group, client, contractor, stakeholder, and host community exists with the highest level of health, safety, and environmental standard performances. Therefore, it seems necessary to assess the HSE-MS performance of contractor(s) by a comparative strategic management model with the aim of continuous improvement. The present Strategic Management Model (SMM) has been illustrated by a case study and the results show that the model is a suitable management tool for decision making in a contract...