Sharif Digital Repository

A simple and straight forward method for acoustic impedance measurement is presented and evaluated. In this method a speaker is used as the signal source. The relationship between the electrical impedance of the speaker and its acoustical load is developed and studied. It is shown that the electrical current and voltage of the speaker relate to the acoustical pressure and volume velocity. The mechanical and acoustical impedances are therefore easily derived by measuring the electrical current and voltage of the circuit. The proposed method yield itself to the automatic computer measurement and can be used for the field and in situ measurements. Comparison of the measurement data with those... 

A large number of people are exposed to whole body vibration in their occupational life. Measuring vibration is an important tool in rehabilitation and biomechanical fields of research. We have proposed image processing as a new method to record and determine the frequency response of human body. The arranged set up for forced vibration consisted of an AC motor, a variable speed drive unit and a shaking table for producing one directional sinusoidal vibration. Volunteers were asked to stand on the shaking table at a relaxed posture. Two digital camcorders were used to capture the motion of colored pencil-dot markers on the skin of human body (forehead) and on the edge of the shaking table.... 

This paper presents a biomechanical model with seven degrees of freedom as a seated human exposed to vertical vibration. Experimental data is used to find the stiffness and damping parameters of the model. The data includes values of seat to head transmissibility, driving point mechanical impedance and apparent mass. The multi-objective function is used to obtain theoretical results similar to three different experimental cases. The unknown coefficients are calculated by a genetic algorithm. Improved results, in comparison with previous models, are achieved from the presented model. Next, this modified model is assembled on a quarter car and parameters of the cushion and the suspension... 

Organic-inorganic perovskite solar cells (PSCs) have gained considerable attention owing to their impressive photovoltaic properties and simple device manufacturing. In general, PSC employs a perovskite absorber material sandwiched between an electron and hole selective transport layer optimized with respect to optimal band alignment, efficient charge collection, and low interfacial recombination. The interfaces between the perovskite absorber and respective selective contacts play a crucial role in determining photovoltaic performance and stability of PSCs. However, a fundamental understanding is lacking, and there is poor understanding in controlling the physical processes at the... 

Ground reaction force (GRF) characteristics of amputee walking are important for the analysis of clinical gait data, and also to update model reference adaptive impedance (MRAI) controllers. GRF estimation is a better alternative than direct GRF measurement because of the disadvantages of load cells, such as high cost, integration difficulties due to weight and physical dimensions, the possibility of overload, and measurement noise. This paper presents four robust MRAI observer/controller combinations for GRF estimation-based control of a prosthesis and a legged robot model in the presence of parametric uncertainties and unmodeled dynamics, in which the robot model is employed to mimic... 

Damage detection and structural health monitoring using the electromechanical impedance method has been accepted as an effective technique between various approaches of nondestructive evaluation. Many efforts have been made on experimental methods for obtaining the impedance of structures. However, expensive experimental methods encourage researchers to develop theoretical models. In this paper, a new theoretical model is developed for damage detection of L-shaped beams, which are basic components in frame structures, with an embedded piezoelectric wafer active sensor. For this purpose, a chirp signal of voltage is used to activate a piezoelectric patch for inducing local strains that lead... 

The electro-mechanical impedance (EMI) method has been accepted as an effective technique for detecting damages in the Structural health monitoring (SHM). EMI at any point of the structure depends on material properties, geometry and boundary conditions that all appears in dynamic stiffness of the structure. In spite of the expensive experimental methods for measuring the mechanical impedance, or the cheaper one electromechanical impedance, of structures, various analytical methods could be substitutions for them. In this paper, an analytical method is developed to obtain the EMI response of L-shaped beams through calculating the dynamic stiffness of the structure. To verify the model, an... 

Abstract: Using adhesively bonded composite patch repairs has been increased in various industries to improve the structural integrity of cracked metallic structures in recent decades. Monitoring of crack propagation and composite patch debonding, as two dominant failure mechanisms in this repair technique, plays a significant role in the integrity assessment of the component. This research conducts an experimental investigation on the simultaneous monitoring of these two failure mechanisms in a cracked metallic specimen repaired by a composite patch. For this purpose, the electromechanical impedance method was used to evaluate the feasibility of recognizing the type of damage at any phase...