Loading...
Search for: microscopic-displacement
0.004 seconds

    Investigation of the microscopic displacement mechanisms and macroscopic behavior of alkaline flooding at different wettability conditions in shaly glass micromodels

    , Article Journal of Petroleum Science and Engineering ; Vol. 122, issue , August , 2014 , pp. 595-615 ; ISSN: 09204105 Mehranfar, A ; Ghazanfari, M. H ; Sharif University of Technology
    Abstract
    Among various chemical methods, alkaline flooding has a great potential for enhancing heavy oil recovery, especially for reservoirs which contain acidic crude oil. However, fundamental understanding about microscopic displacement mechanisms and macroscopic behavior during alkaline floods at different wettabilities is not well understood, especially in five-spot shaly models. In this work several alkaline floods are performed on a glass micromodel containing randomly distributed shale streaks at different wettability conditions. Various mechanisms responsible for enhancing heavy oil recovery during alkaline flooding are investigated at different wettability conditions. These mechanisms... 

    Heavy oil recovery using ASP flooding: A pore-level experimental study in fractured five-spot micromodels

    , Article Canadian Journal of Chemical Engineering ; Volume 94, Issue 4 , 2016 , Pages 779-791 ; 00084034 (ISSN) Sedaghat, M ; Mohammadzadeh, O ; Kord, S ; Chatzis, I ; Sharif University of Technology
    Wiley-Liss Inc  2016
    Abstract
    Although alkaline-surfactant-polymer (ASP) flooding has proven efficient for heavy oil recovery, the displacement mechanisms and efficiency of this process should be discussed further in fractured porous media. In this study, several ASP flooding tests were conducted in fractured glass-etched micromodels with a typical waterflood geometrical configuration, i.e. five-spot injection-production pattern. The ASP flooding tests were conducted at constant injection flow rates but different fracture geometrical characteristics. The ASP solutions consisted of five polymers, two surfactants, and three alkaline types. It was found that using synthetic polymers, especially hydrolyzed polyacrylamide... 

    Investigating the effect of co-solvents on heavy oil recovery in different pore geometries using five-spot micromodels

    , Article 15th European Symposium on Improved Oil Recovery 2009, 27 April 2009 through 29 April 2009, Paris ; 2009 , Pages 669-682 ; 9781622768912 (ISBN) Dehghan, A. A ; Kharrat, R ; Ghazanfari, M. H ; Vossoughi, S ; Sharif University of Technology
    Abstract
    The main issue in heavy oils enhanced recovery methods is to reduce their viscosity in order to get a better mobility. This is commonly obtained by blending the oil with light hydrocarbons. Co-solvents are good candidates to improve the hydrocarbon recovery efficiency especially in miscible processes. However, the effect of co-solvents on miscible flooding of heavy oil reservoirs at different pore geometries is not well understood. In this work different one-quarter five-spot network patterns along with those generated from reservoir rocks' thin sections were etches on glass surfaces. The models that had been initially saturated with the heavy crude oil were used to perform a series of... 

    Investigating the fracture network effects on sweep efficiency during wag injection process

    , Article Transport in Porous Media ; Volume 93, Issue 3 , July , 2012 , Pages 577-595 ; 01693913 (ISSN) Dehghan, A. A ; Ghorbanizadeh, S ; Ayatollahi, S ; Sharif University of Technology
    2012
    Abstract
    In this study, the main recovery mechanisms behind oil/water/gas interactions during the water-alternating-gas (WAG) injection process, in a network of matrix/fracture, were fundamentally investigated. A visual micromodel was utilized to provide insights into the potential applications of WAG process in fractured oil-wet media as well as the possibility of observing microscopic displacement behavior of fluids in the model. The model was made of an oil-wet facture/matrix network system, comprised of four matrix blocks surrounded with fractures. Different WAG injection scenarios, such as slug arrangements and the effects of fluid injection rates on oil recovery were studied. A new equation... 

    Pore-Scale Monitoring of Wettability Alteration by Silica Nanoparticles During Polymer Flooding to Heavy Oil in a Five-Spot Glass Micromodel

    , Article Transport in Porous Media ; Volume 87, Issue 3 , 2011 , Pages 653-664 ; 01693913 (ISSN) Maghzi, A ; Mohebbi, A ; Kharrat, R ; Ghazanfari, M. H ; Sharif University of Technology
    Abstract
    It is well known that the oil recovery is affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of medium surfaces has remained a topic of debate in the literature. Furthermore, there is a little information of the way dispersed silica nanoparticles affect the oil recovery efficiency during polymer flooding, especially, when heavy oil is used. In this study, a series of injection experiments were performed in a five-spot glass micromodel after saturation with the heavy oil. Polyacrylamide solution and dispersed silica nanoparticles in polyacrylamide (DSNP) solution were used as injected fluids. The oil recovery as well as fluid distribution in... 

    Pore-level investigation of heavy oil recovery during water alternating solvent injection process

    , Article Transport in Porous Media ; Volume 83, Issue 3 , July , 2010 , Pages 653-666 ; 01693913 (ISSN) Dehghan, A. A ; Farzaneh, S. A ; Kharrat, R ; Ghazanfari, M. H ; Rashtchian, D ; Sharif University of Technology
    2010
    Abstract
    This study concerns with the microscopic and macroscopic fluid distribution and flow behavior during water alternating solvent (WAS) injection process to heavy oil using micromodel generated from thin section of a real rock which has rarely attended in the available literature. In this study, a one-quarter five-spot glass micromodel was deployed to examine the effect of flow media topology on microscopic displacements as well as macroscopic efficiency of WAS process. The micromodel was initially saturated with the heavy oil, and then the hydrocarbon solvent and water were injected alternately into it. The observations confirmed that WAS injection scheme is an effective method for the...