Sharif Digital Repository

This paper focused on the conceptual design of a conventional gas turbine combustor via the multi-objective optimization approach. The suggested method integrated the design and estimation of the performance of the combustion chamber. The geometry and performance parameters could be found by applying the design tool. According to the level of available information in the primary phases of the design process, a chemical reactor network approach for modeling the combustion was chosen; thus, the droplet evaporation of the liquid fuel and unmixedness of the fuel-air mixture in the primary zone was modeled. The results obtained from the design tool for the two annular combustors were compared... 

In this study a hybrid method of neural networks-genetic algorithms is proposed and applied in an economical case study. The results of this study show that the proposed hybrid algorithm is a more efficient modeling approach compared to either a single neural network method or a single genetic algorithm approach. Since modeling based on the observed data is also employed in other fields of science, the application of the proposed method is not restricted only to economics. © 2008 Asian Network for Scientific Information  

This paper is a summary and in-depth evaluation of some popular models for power electronic converters. Proper examples are given to support the evaluation with a complete comparison between the actual and simulated results. The paper presents the effort behind the design and analysis of DC-DC Converters and discuses their features. Some advantages and disadvantages of the studied models and the complicities of the nonlinear structure of the switching function of the converters are explained here. The paper offers some useful criteria for future selection and development on different DC-DC Converters. © 2006 IEEE  

In this paper, we propose a new packet routing scheme, i.e., a combined digital and analog network coding scheme (DNC-ANC) suitable for multiple unicast scenario. In this respect, we consider a random access WLAN comprised of single and multi-hop unicast sessions. Then we modify the MAC scheme in order to enable ANC. In order to evaluate the effect of the proposed DNC-ANC scheme analytically, we employ an open queueing network and map the details of MAC as well as routing schemes onto its suitable parameters. By writing the corresponding traffic equations and applying the stability condition, we are able to find the maximum stable throughput for the considered scenario. Finally, we will show... 

The strengthening behavior of particle reinforced metal-matrix composites is primarily attributed to the dislocation strengthening effect and the load transfer effect. To account for these two effects in a unified way, a new multi-scale approach is developed in this paper incorporating the aspect ratio effect into the geometrically necessary dislocation strengthening relationships. By making use of this multi-scale approach, the deformation behavior of metal-matrix composites (MMCs) and metal-matrix nanocomposites (MMNCs) as a function of size, volume fraction, aspect ratio, etc. of the particles has been investigated. Comparison with the previously proposed models and the available... 

Streaming potential measurement is one of the electrokinetic techniques used to determine the average zeta potential of porous rock which can provide reliable information on reservoir flow behavior and wettability state of the rock surface. Streaming potential measurement using electrodes has recently been introduced in the oil reservoirs applications and there are still significant uncertainties during the measurements and interpretation of streaming potential results. The primary purpose of this work is to establish a setup to measure the streaming potential of porous media with low scattering and evaluate voltage measurements based on the paired stabilization and pressure ramping methods.... 

Based on Lagrangian mechanics, we present a novel and computationally efficient set of equations of motion in the matrix notation, for unconstrained or constrained mechanical systems including ignorable coordinates. The equations are applicable to multibody systems including holonomic or nonholonomic constraints. It is shown that by appropriate selection of generalized speeds as a new set of motion variables, the constraint reaction forces can be automatically eliminated from the set of developed reduced dynamical equations in a straightforward manner, resulting in a minimal set of dynamic equations. We present simulation results on one constrained and one unconstrained system to demonstrate... 

The rise of the damage to energy systems caused by both natural and man-made disruptive events and the connection between energy systems and socio-economic systems have motivated the study of energy system resilience. This paper conceptualizes and comprehensively presents a systematic review of the recent literature focused on the analytical, technical, and mathematical points from the standpoint of the energy systems facing disruptive events. To this end, five phases are developed. Firstly, the concept of the energy system resilience is presented, and then the energy resilience characters and the resilience states are introduced and connected. Thirdly, the formulation and indicators of the... 

The rise of the damage to energy systems caused by both natural and man-made disruptive events and the connection between energy systems and socio-economic systems have motivated the study of energy system resilience. This paper conceptualizes and comprehensively presents a systematic review of the recent literature focused on the analytical, technical, and mathematical points from the standpoint of the energy systems facing disruptive events. To this end, five phases are developed. Firstly, the concept of the energy system resilience is presented, and then the energy resilience characters and the resilience states are introduced and connected. Thirdly, the formulation and indicators of the... 

A dc-dc resonant converter has the advantage of overcoming switching losses and electromagnetic interference which are the main limitations of high frequency power converters. Nevertheless, the modeling and stability analysis of dc-dc resonant converters are considerably more complex than pulsewidth modulation counterparts. The conventional averaged linearized model of the resonant converter has limitations due to averaging and linearization. First of all, the linearized model has large modeling error in presence of large variations of reference voltage and input voltage. Furthermore, Converging area for stabilizing controllers is smaller in the averaged model. In order to overcome these... 

This fact is well known that during any scenario of production, asphaltene deposition in porous media has a substantial effect on oil flow. But a clear understanding of asphaltene deposition mechanisms can help to minimize asphaltenic problem in oil-bearing formations. In this study, the experimental results of three dynamic CO 2 miscible injection tests were investigated. Regarding the effects of adsorption, mechanical entrapment, and sweeping mechanisms on permeability behavior, a mathematical mass and permeability variation model were developed. According to the experimental results asphaltene deposition causes a 70% loss of sand stone initial permeability while the loss is significantly... 

Wind power is a promising source of electric power generation since it has tremendous environmental and social benefits. The generation scheduling (GS) problem encounters several uncertainties in terms of the system's parameters such as load, reserve and available wind power generation. The modeling of those uncertainties is an important issue in power system scheduling. A fuzzy based modeling approach can be used to develop the generation schedule under an uncertain environment. In this paper, the type-2 fuzzy membership function (MF) is implemented to model the linguistic uncertainty of type-1 MF of available wind power generation which stems from opinions of different experts. The... 

Gas turbine has broad applications in variety of industries. The developing gas turbine efficiency is of great engineering concern. This appeals to more precise modeling as somewhat inevitable. Modeling plays a decisive and essential role not only in all design phases, but also in development and manufacturing process to investigate performance of an engine. In this research, components of a gas turbine including air intake, axial and centrifugal compressors, combustion chamber and axial turbine are investigated. A novel dimensionless modeling approach is introduced and then, the engine performance parameters are predicted. Setting up a systematic series of experiments on the existing engine... 

The present study deals with the feasibility of a microfluidic microbial electrolysis cell (MEC) as an efficient biohydrogen generator for medical usage for the first time. The evaluation of nickel in microfluidic MEC as an alternative for conventional electrodes indicates successful performance in the improvement of bioenergy production. The maximum biohydrogen production rate and produced power density of 2.2 μW cm−2 and 1.4 μl H2 μl substrate−1 day−1 were obtained, respectively. It is considered a promising technology for medical usage due to the following factors: significant biohydrogen generation, low consumption of expensive materials, simple construction, and utilization of human... 

Filtrate and solid invasion from drilling fluids are two key sources of formation damage, and can result in formation permeability impairment. Typically, spurt invasion of mud solids causes the evolution of an external mud cake which tends to reduce further solids and filtrate influx. However, uncontrolled spurt and filtrate invasion are detrimental because they reduce the permeability of the formation. Mud composition, formation rock's permeability and porosity, and temperature can influence both spurt and filtrate invasion. The sizes of mud solids relative to the average pore size of a rock are also important in predicting the extent of mud invasion and permeability impairment. In this... 

This paper presents a hybrid adaptive network based fuzzy inference system (ANFIS), computer simulation and time series algorithm to estimate and predict electricity consumption estimation. The difficulty with electricity consumption estimation modeling approach such as time series is the reason for proposing the hybrid approach of this study. The algorithm is ideal for uncertain, ambiguous and complex estimation and forecasting. Computer simulation is developed to generate random variables for monthly electricity consumption. Various structures of ANFIS are examined and the preferred model is selected for estimation by the proposed algorithm. Finally, the preferred ANFIS and time series... 

Wireless mesh networks (WMNs) are well-promising future networks especially for ubiquitous connection to Internet. In this paper, we propose an analytical model in order to evaluate the maximum stable throughput of a WMN based on a simplified version of IEEE 802.11s MAC protocol. Our modeling approach is based on a multi-class open queueing network. In this respect, we map some of the important features of IEEE 802.11s MAC protocol, esp., its contention-based and contention-free periods onto different parameters of the proposed queueing network. By solving the related traffic equations and applying the stability condition, we determine the maximum stable throughput, i.e., the maximum packet... 

Traffic models exert different message flows in a network and have a considerable effect on power consumption through different applications. So a good power analysis should consider traffic models. In this paper we present power and throughput models in terms of traffic rate parameters for the most popular traffic models, i.e. Uniform, Local, HotSpot and First Matrix Transpose (FMT) as a permutational traffic model. We also select Mesh topology as the most prominent NoC topology and validate the presented models by comparing our results against simulation results from Synopsys Power Compiler and Modelsim From the comparison, we show that our modeling approach leads to average error of 2%... 

Online selection of the appropriate model and identifying its parameters based on measured vibrational data are among the challenging issues in dynamic system identification. After a severe earthquake, quick monitoring and assessment of structural health status play a crucial role in effective critical risk management for the building owners and decision-makers. The Bayesian multiple modeling approach is a suitable tool for optimal model class selection, which is used in this article mainly for improving data fitting precision, decreasing dimensions of structural unknown vector through removing unnecessary parameters, detecting the occurrence and type of predominant phenomenon related to...