Sharif Digital Repository

Nanostructured TiO2-Al2O3 films and powders were prepared by a straightforward aqueous particulate sol-gel route. Titanium (IV) isopropoxide and aluminum chloride were used as precursors, and hydroxypropyl cellulose was used as a polymeric fugitive agent in order to increase the porosity. The effect of Al:Ti molar ratio was studied on the crystallization behavior of the products. X-ray diffraction (XRD) revealed that the powders crystallized at 800°C, containing anatase-TiO2, rutile-TiO2 and cubic-Al2O3 phases. Furthermore, it was found that Al2O3 retarded the anatase to rutile transformation. Transmission electron microscope (TEM) image showed that one of the smallest crystallite sizes was... 

Nanocrystalline and nanostructured TiO2-Cr2O3 thin films and powders were prepared by a facile and straightforward aqueous particulate sol-gel route at low temperature of 400°C. The prepared sols showed a narrow particle size distribution with hydrodynamic diameter in the range of 17.7 nm to 19.0 nm. Moreover, the sols were stable over 4 months, with constant zeta potential measured during this period. The effect of the Cr:Ti molar ratio on the crystallization behavior of the products was studied. X-ray diffraction (XRD) analysis revealed that the powders crystallized at low temperature of 400°C, containing anatase-TiO2, rutile-TiO2, and Cr2O3 phases, depending on the annealing temperature... 

Nanostructured TiO2-SnO2 thin films and powders were prepared by a facile aqueous particulate sol-gel route. The prepared sols showed a narrow particle size distribution with hydrodynamic diameter in the range 17.2-19.3 nm. Moreover, the sols were stable over 5 months, since the constant zeta potential was measured during this period. The effect of Sn:Ti molar ratio was studied on the crystallisation behaviour of the products. X-ray diffraction analysis revealed that the powders were crystallised at the low temperature of 400 °C containing anatase-TiO2, rutile-TiO2 and cassiterite-SnO2 phases, depending on annealing temperature and Sn:Ti molar ratio. Furthermore, it was found that SnO2... 

The XW/rGO compounds (XW = Co or Ni modified WO3) have has been utilized as catalysts in the oxidative desulfurization (ODS) process of a liquid model fuel containing dibenzothiophene (DBT). Various characterization methods were carried out to complete evaluations of the prepared catalysts. Moreover, using the GC–MS method, it became clear that the final product of the process was dibenzothiophene sulfone (DBTO2). Furthermore, results showed that under the optimized conditions (oxidant to substrate molar ratio = 6, 75 °C and catalyst to substrate molar ratio = 0.08), the DBT content of a model fuel was declined by 100% only within a reaction duration time of 45 min using the CoW (20)/rGO... 

In this study, we have reported the preparation of bi-supported Ziegler-Natta catalysts using magnesium ethoxide and graphene oxide as support. The polymerization process was carried out in slurry phase using triisobutylaluminum as a co-catalyst.The XRD analysis of TiCl4/graphene oxide/Mg(OEt)2 catalyst demonstrated that the space between the layers of graphene oxide had increased to 0.2 nm.The catalyst was characterized by XPS, BET, BJH, SEM, and TGA. The catalyst activity was studied for various Al/Ti molar ratios, and the catalyst activity was optimum at Al/Ti molar ratio of 315. © 2016, Pleiades Publishing, Ltd  

The oxidative desulfurization of a real refinery feedstock (i.e., non-hydrotreated kerosene with total sulfur mass content of 0.16%) with a mixture of hydrogen peroxide and acetic acid was studied. The influences of various operating parameters including reaction temperature (T), acid to sulfur molar ratio (nacid/nS), and oxidant to sulfur molar ratio (nO/nS) on the sulfur removal of kerosene were investigated. The results revealed that an increase in the reaction temperature (T) and nacid/nS enhances the sulfur removal. Moreover, there is an optimum nO/nS related to the reaction temperature and the best sulfur removal could be obtained at nO/nS8 and 23 for the reaction temperatures of 25... 

The nitrate-citrate gel exhibits auto-catalytic behavior, which can be used to synthesize nanocrystalline YIG powders. In this study, yttrium iron garnet (Y3Fe5O12) nanocrystalline powders were prepared by a sol-gel auto-combustion process. The influence of metal nitrates to citric acid molar ratio (MN/CA) of the precursor solution on the combustion behavior and crystallite size of synthesized powders was investigated by scanning electron microscopy (SEM), thermal analyses (DTA/TGA) and X-ray diffraction (XRD). The results show that with increasing MN/CA value, the combustion rate increases and the single-phase YIG forms at a higher temperature. The crystallite size of the single phase YIG... 

CaO–La2O3 mixed oxides were synthesized by co-precipitation coupled with Li doping through wet impregnation. These were used as catalysts for transesterification of canola oil and methanol toward biodiesel production. To determine the structure and morphology of the prepared catalysts, they were characterized by the XRD, FESEM, BET, and basic strength measurements. Under optimum reaction conditions of methanol/oil molar ratio of 15:1, 5 wt% catalyst at 65 °C, 96.3% conversion was obtained in 2.5 h of reaction duration. Moreover, the catalyst demonstrated a rather high stability where reuse of up to five cycles without significant loss of performance observed. © 2016 The Korean Society of... 

In this study, a cryogenic distillation column has been designed and simulated via a computer code based on the theta method of convergence. The required thermodynamic properties are determined from the enhanced predictive Peng-Robinson (E-PPR 78) equation of state which has a good accuracy in predicting the corresponding thermodynamic properties of natural gas components. The combined code of distillation column/equation of state has been verified with that of another study. In the present study, the results are achieved by the constant molar over-flow and inclusion of energy equations assumptions. In order to have more accuracy in the results, the energy equations were considered in the... 

Nanostructured and nanoporous TiO2-Er2O3 films and powders with various TiO2 : Er2O3 molar ratios and high specific surface area (SSA) have been prepared by a new straightforward particulate sol-gel route. X-ray diffraction and Fourier transform infrared spectroscopy revealed that erbium oxide formed in the range 50-100 mol.-%Er2O3, whereas erbium dititanate formed in the range 25-100 mol.-%Er2O3. Oxygen deficient titania phases (TiO2-x), such as Ti7O13 and Ti 2O3, were observed for TiO2:Er 2O3=25:75 (molar ratio) system annealed at 800°C. It was observed that Er2O3 retarded anatase to rutile transformation. Furthermore, TEM analysis also showed that Er2O 3 hindered the crystallisation and... 

Hand in hand with the flourish of the biodiesel industry, glycerol (GLY) as an inconvenient by-product has generated environmental and sustainability concerns. Devising measures for efficient transformation of GLY into value-added products is a promising solution. In this contribution, the transformation of GLY to lactic acid (LA) as a valuable chemical was investigated in a continuous process for industrial applications. In this regard, a catalytic method using heterogeneous Cu nanoparticles in NaOH solution was studied in a microreactor by a CFD simulation. A seven-inlet micromixer comprising an optimized mixing unit was incorporated for uniform distribution of the species. The effects of... 

The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd + Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution... 

The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd + Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution... 

In this study, biodiesel (FAME) was prepared using a novel heterogeneous catalyst of phosphomolybdic acid (H3PMo12O40, HPMo)/support graphene oxide (GO). The characterization of the catalyst was evaluated by SEM, EDX, Map analysis, TEM, FT-IR, and Raman analyses. The production of biodiesel from waste cooking oil (WCO) was carried out by the electrolysis method. The process of the trans-esterification reaction was optimized by applying the response surface methodology (RSM) based on the central composite design (CCD) approach. The effects of four independent variables of methanol to oil molar ratio (6–12 mol:mol), catalyst weight (0.5–1.5 wt%), time (8–24 h), and voltage (30–70 V) were... 

In this contribution, reduced grapheme oxides (rGO) with immobilized tin oxide (SnO2) nanocatalysts were synthesized via the Incipient Wetness Impregnation (IWI) method. To characterize the SnO2/rGO composites, several analyses including the; XRD, Raman, FTIR, ICP-OES, BET-BJH, XPS, TEM, and TPD were utilized. Then the effects of parameters including reaction time, total metal loading, and the initial sulfur concentration of model fuel in the dibenzothiophene (DBT) oxidation desulfurization process were evaluated. After determining the optimal conditions for the aforementioned parameters, the influences of 3 effective factors of the molar ratio of oxidant/substrate (O/S), the molar ratio of... 

The present study aims to convert waste cooking oil (WCO) into biodiesel via phosphomolybdic acid (H3PMo12O40, PMA) supported on Clinoptilolite as a novel green acid catalyst through an electrolysis procedure. The prepared catalysts were characterized by XRD, FTIR, FESEM, EDS, Elemental map, and TEM analyses. The effect of four independent variables on biodiesel yield including methanol to oil molar ratio (6:1–14:1), catalyst weight (2–5 wt%), time (3–5 h), and voltage (15–35 V) was optimized and evaluated by the response surface methodology (RSM) employing central composite design (CCD). The maximum value of biodiesel yield was 96% under the optimal conditions, including the methanol to oil... 

The effect of bisulfite (HSO3–) in nCaO2/Fe(III)/HSO3– system on improving HO• generation and trichloroethene (TCE) removal was innovatively reported. The enhancement mechanism of HSO3– for TCE removal in nCaO2/Fe(III)/HSO3– system was caused not only by the complexing and reducing effects on promoting the conversion of Fe(III) to Fe(II), but also due to the reaction with O2 in water to produce SO4–• for accelerating TCE degradation. A double effect of nCaO2 as an oxidant source to generate HO• and as a O2 source to promote SO4–• generation was revealed. A pseudo-second-order kinetic model of TCE removal was determined and 94.6% TCE degradation was achieved within 60 min at the... 

Surface modification of titanium implants is recently considered by several researchers. In this study, PEO was performed over commercially Ti-6Al-4V alloy pellets in an aqueous electrolyte containing calcium acetate (C.A.) and calcium glycerphosphate (Ca-GP) with a Ca/P molar ratio of 6.8, and applying current density of 0.212 A/cm2, frequency of 100 Hz and duty ratio of 60% for 4 min. In the next step, hydrothermal treatments were carried out for various durations and at different temperatures inside an autoclave chamber containing a NaOH solution with pH of 11.5. XRD and SEM results confirmed formation of needle-shaped HAp after all hydrothermal conditions. Maximum intensity of HAp peaks... 

The morphological manipulation and structural characterisation of TiO 2-MgO binary system by an aqueous particulate sol-gel route were reported. Different crystal structures including pure MgTiO 3, mixtures of MgTiO 3 and TiO 2 and mixtures of MgTiO 3 and Mg 2TiO 4 were tailored by controlling Mg:Ti molar ratio and annealing temperatures as the processing parameters. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that all compounds crystallised at the low temperature of 500 °C. Furthermore, it was found that the average crystallite size of the compounds depends upon the Mg:Ti molar ratio as well as the annealing temperature, being in the range 3-5 nm at... 

Heterogeneous solid catalysts comprising CaO and ZrO 2 mixed oxides with various Ca-to-Zr molar ratios were synthesized by means of coprecipitation method. These synthesized mixed oxide catalysts were used for the transesterification of waste cooking oil (WCO) as feedstock with methanol to produce biodiesel fuel (BDF) at 65 °C and 1 atm. The influences of Ca-to-Zr molar ratio, catalyst loading, methanol-to-oil molar ratio, and the reaction time on the BDF yield were carefully investigated. In addition, the stability of prepared solid catalysts was studied. These catalysts were characterized by using techniques of X-ray diffraction, X-ray florescence, X-ray photoelectron spectroscopy, surface...