Sharif Digital Repository

This study reports synthesis and characterization of polymeric [MoO2(Salen)] complexes that combine MoO2(acac)2 and polymeric ligands bearing N2O2 coordination sites, abbreviated herein as [piperazinCH2{MoO2(Salen)}]n (6), [piperazinCH2{MoO2(Salophen)}]n (7), and [piperazinCH2{MoO2(Salpn)}]n (8). The epoxidation of alkenes using tert-butyl hydroperoxide and oxidation of sulfides to sulfoxides by urea hydrogen peroxide were enhanced with excellent selectivity under the catalytic influence of these coordination polymers. No relevant difference in activity was found due to change in the diamine in the Schiffs base ligands. The stability of polymeric catalysts was assessed by recycling a sample... 

A new mononuclear oxo-peroxo complex of molybdenum(VI) of the formula [MoO(O2)(phox)2] (where phox = 2-(2′-hydroxyphenyl) oxazoline) has been synthesized and characterized by X-ray structure analysis, elemental analysis, infrared, UV-visible and 1H, 13C NMR spectroscopy. A monoclinic space group P-1 was determined by X-ray crystallography from single-crystal data of this complex. Complex functions as facile alkane oxidation catalyst with hydrogen peroxide as terminal oxidant at room temperature. The catalyst shows very much efficient reactivity in the oxidation reactions giving high yield, turnover number (TON) and selectivity  

Graphene oxide was an effective supporting material for immobilizing a dioxomolybdenum Schiff base complex via covalent interaction. The large surface of graphene oxide plays important roles to obtain a good degree of catalytic reaction. Catalytic capacity of the graphene-bound dioxomolybdenum Schiff base complex was investigated for the oxidation of various sulfides to sulfoxide compounds using hydrogen peroxide urea as an oxidant. The catalyst was characterized by various techniques including XRD, FTIR, TGA, SEM, UV–vis, and ICP-AES. The immobilized complex was very efficient with the extra benefits of easy recovery and recycling of the heterogeneous catalyst. The graphene oxide bound... 

Single-layer MoS2-MoO3-x heterojunction nanosheets with visible-light-sensitive band gap energy and average lateral dimensions of ~70 nm were synthesized by using a two-step combined exfoliation method. The exfoliation was initiated from pristine MoS2, while some sulfur sites in expanded MoS2 sheets during exfoliating were substituted by ambient non-thermal oxygen, resulting in formation of α-MoO3-x crystalline domains. The morphological features, crystalline structure, phase formation, number of layers, and optical properties of the MoS2-MoO3-x nanosheets were determined by atomic force microscopy; X-ray diffraction; field emission electron microscopy; transmission electron microscopy; and... 

A three–dimensional metal organic framework (3D–MOF) and a two–dimensional polyoxometalate (2D–POM), both incorporating nanostructured molybdenum (VI) oxide, were synthesized and implemented for headspace needle trap extraction of traces of chlorobenzenes (CBs). The 3D–MOF of type {(Mo2O6)(4,4′–bpy)}n and the 2D–POM of type [4,4′–bpy][Mo7O22] were synthesized by a solvothermal process and characterized by FT–IR, powder X–ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetry, energy dispersive X–ray, elemental mapping and Brunner–Emmet–Teller adsorption analyses. The 3D–MOF proved to be superior. Following thermal desorption, the CBs... 

Nanostructured molybdenum oxide having a particle size in the range of 30-80 nm was prepared by potentiodynamic electrodeposition method, and the effects of H2SO4 concentration on its capacitive behavior were studied by cyclic voltammetry, galvanostatic discharge, and electrochemical impedance spectroscopy. Poor to fair capacitive behaviors were witnessed depending on the electrolyte concentration and conditions of charge/discharge. Increasing acid concentration to 0.02 M had favorable effect, while beyond that, the effect was detrimental. Capacitance around 600 F g-1 was recorded in the potential range of 0 to -0.55 V vs. Ag/AgCl  

Nanostructured molybdenum oxide was potentiodynamically deposited onto a stainless steel surface from an aqueous bath by cycling the potential between 0 and -0.75 V vs. Ag/AgCl. The deposit consisted of particulates in the range of 30 to 80 nm. Electrochemical studies under galvanostatic charge/discharge and also impedance spectroscopy revealed capacitive behavior in the potential range of -0.3 to -0.55 V vs. Ag/AgCl with the value of 477 F g-1 at 0.1 mA/cm2. An equivalent circuit comprising of three parallel branches consisting of double-layer capacitance, Warburg impedance, and a constant phase element signifying pseudo-capacitance each coupled with their corresponding resistances was... 

We have evaluated the catalytic activity of a molybdenum(VI) oxo-peroxo complex through the oxidation and reduction of sulfur-based compounds. Arylalkyl, diaryl and dialkyl sulfides are selectively oxidized to corresponding sulfoxides, with tert-butyl hydroperoxide (TBHP), in the presence of MoO(O 2)(phox) 2 complex as catalyst. This molybdenum complex was also found to be an efficient catalyst for the deoxygenation of sulfoxides to sulfides with PPh 3 in excellent yields and chemoselectivity  

The current study was carried out to investigate the kinetics of reactions for the pressure oxidative leaching of a molybdenite concentrate in less than one hour. The effects of oxygen pressure, stirring speed, pulp density, acid concentration and temperature on the leaching rate of the molybdenum were studied. It was found that about 85% of molybdenite was oxidized to molybdic oxide precipitate with remaining molybdenum dissolved in the leaching liquor. Analysis of experimental data showed that the reaction is chemically controlled with activation energy of 68.8 kJ/mol. Furthermore SEM images showed no significant boundary diffusion layer and it was noted that the molybdic oxide... 

Heterogeneous nanoscale catalyst was successfully synthesized via anchoring of oxoperoxo molybdenum(VI) complex on the chloro-functionalized SBA-15. The mesoporous nanomaterials, MoO3(sal-phz)/SBA-15 (where sal-phz is salicylidene 2-picoloyl hydrazine) were identified by several characterization techniques. MoO3(sal-phz)/SBA-15 and MoO3(sal-phz) were also treated as catalysts in the olefins epoxidation reactions. Both homogenous and heterogeneous catalysts exhibit outstanding activity and selectivity for epoxide with tert-BuOOH in decane as oxidant at 95 °C. In addition, the heterogeneous nanocatalyst was chemically stable and can be efficiently reused for at least six cycles without a... 

Unidirectional current flow is at the heart of modern electronics, which has been conceived by making p–n junctions or Schottky barriers between different kinds of materials. Within such elements, however, synthesis of thin film lateral heterostructures has so far remained challenging. Here, a one-step simple synthesis of p-type, n-type, and metallic lateral heterostructures using bipolar electrodeposition (BPE) technique is reported. Molybdenum oxides and sulfides with gradient of oxygen and sulfur are deposited at a metallic substrate. A lateral heterostructure is achieved with electrical properties that change from p- to n-type semiconductor and then to metal by moving in the plane of the... 

Novel molybdenum complex, cis-[MoO2(phox)2] has been synthesized and characterized by IR, 1H NMR, elemental analyses (CHN), and X-ray molecular structure determination methods. This complex was found to be an efficient, selective catalyst for the oxidation of various sulfides to sulfoxides with urea hydrogen peroxide (UHP) in excellent yields (100% for diallylsulfide) and short reaction times (20 min) at room temperature. The catalytic system oxidizes diallylsulfide chemoselectively to its corresponding sulfoxide without any over oxidation in double bond. © 2007 Elsevier B.V. All rights reserved  

A novel ɑ-NiMoO4/ɑ-MoO3 binary nanocomposite was fabricated by using facile method. The fabricated nanocomposite was characterized by various techniques, and the photocatalytic activity was evaluated in degradation of Acid blue 92 dye. Among of as-made photocatalysts with various weight ratios of ɑ-MoO3, ɑ-NiMoO4/ɑ-MoO3 (1:5%w/w) exhibited the best photocatalytic performance, and selected as optimum photocatalyst. Under optimum reaction conditions ([dye] = 10 mg L−1, [catalyst] = 200 mg L−1, and pH = 7.0), complete removal efficiency was obtained within 100 min. Also, the first-order rate constant value of reaction in the presence of ɑ-NiMoO4/ɑ-MoO3 was calculated to be 0.032 min−1 that was... 

Molybdenum oxide nanostructures were synthesized utilizing the solution combustion method where the ammonium molybdate powder and an organic additive were used as precursors. Different organic additives including ethylene diamine tetraacetic acid (EDTA), polyethylene glycol 200 (PEG 200), sorbitol and urea were used as surfactants in order to investigate the effect of additive structure on morphology and particle size of products. Also various reaction parameters such as the additive/Mo molar ratio, concentration of metal ion in solution, pH of the reaction, and temperature of the synthesis media were changed to study effects on product morphology and size. Outcomes were characterized by... 

Selective oxidation of H2S to elemental sulfur is a low cost and highly efficient process for sulfur removal from H2S-containing hydrocarbon streams in medium scale (i.e. 0.2–10 ton sulfur/day) for environmental protection and prevention of emitting toxic gases to the atmosphere. In this research, in order to prepare a highly active and selective nanocatalyst for selective oxidation of hydrogen sulfide, for the first time, molybdenum oxides were loaded uniformly over nitrogen- doped carbon nanotubes through incipient wetness impregnation. Different metal loadings including 5, 10, and 15 wt% Mo were considered in the synthesis procedure to achieve the optimized performance and provide...