Loading...
Search for:
monolithic-dye-sensitized-solar-cells
0.006 seconds
Fabrication of Monolithic Dye Sensitized Solar Cell Based on Composite Cathode with Platinum Nanoparticles
, M.Sc. Thesis Sharif University of Technology ; Taghavinia, Nima (Supervisor)
Abstract
Increasing of human demanding for energy and limiting of fossil fuels and bio-logical problems, it seems necessary to access new and clean source of ener-gy. For instance, one of these sources of energy is sun. If we can impart from this infinite energy source so health and natural life can be pictured for human. Nanostructure dye sensitized solar cells in compare with other photovoltaic cells are more economical and practical as a result of lower material cost and simpler manufacturing process. In general, a typical dye sensitized solar cell is a sandwich structure based on two transparent conducting oxide (FTO) glasses. The FTO glass substrates are expensive and account for most of...
Monolithic Solar Cells with Dye or Perovskite Light Absorbent
, Ph.D. Dissertation Sharif University of Technology ; Taghavinia, Nima (Supervisor)
Abstract
According to Iran's proper location to take advantage of solar energy and the ability of nanostructured solar cells fabrication in the country, in this study, the manufacturing problems and complexities of nanostructured solar cells such as dye solar cells and perovskite-based solar cells are investigated. The chromium metal as an alternative to the transparent conductive substrates in order to reduce the manufacturing cost of dye solar cells (DSCs) and reducing series resistance is introduced in this study. In case of utilizing chromium as a substrate for photoanode, the thickness of CrxOy layer is controlled by depositing TiO2 compact layer and the efficiency of DSC is increased from 2.6%...
Monolithic dye sensitized solar cell with metal foil counter electrode
, Article Organic Electronics ; Volume 57 , June , 2018 , Pages 194-200 ; 15661199 (ISSN) ; Taghavinia, N ; Ghazyani, N ; Sharif University of Technology
Elsevier B.V
2018
Abstract
Monolithic dye-sensitized solar cells are conventionally fabricated using carbon composite layer as the counter electrode. In the current research, the brittle carbon composite layer is replaced with a metal foil, aiming to decrease the device series resistance and using less catalyst material in counter electrode. This metallic structure has also an advantage of mechanical strength and decreases the fabrication complexity. The counter electrode is prepared by electrodepositing Cr film followed by electrodepositing Pt nanoparticles on a metal foil. As the porous spacer layer, different composite layers of SiO2, TiO2, and Al2O3 are investigated and the best results are obtained for TiO2...