Sharif Digital Repository

Mordenite (MOR) nanocrystals were synthesized using the hydrothermal method. Sol–gel and deposition methods were utilized to modify the zeolite surface with TiO2 and then AgBr or AgCl particles. Photocatalysts were characterized by using X-ray diffraction, Brunauer–Emmett–Teller (BET), and scanning electron microscopy techniques. Activity was evaluated by photodegradation of Acid Blue 92 as an azo dye. The effect of silver halide deposition on the photocatalytic behavior of the prepared nanocomposites was studied under both ultraviolet (UV) and visible light, and the results were compared. The results showed that AgCl/TiO2/MOR was more active under UV, while with visible source,... 

Methanol conversion was investigated on dealuminated mordenite (DM) as well as a series of promoted DM (i.e., metal/DM) catalysts prepared by impregnation. Prepared catalysts characterized by the powder XRD, BET, and NH3-TPD techniques. Chemical analysis was performed using induced coupled plasma (ICP) method. The conversion of methanol over different metal/mordenite catalysts was compared at 460C and WHSV of 1 h-1. Several metals including Fe, La, and Ca had been used to prepare metal/DM catalysts, which displayed high selectivity toward propylene production. Ultimately, La/DM catalyst was determined to be the best material amongst those investigated for methanol conversion based upon its... 

ZnO and Mordenite zeolite (MOR) nanoparticles were prepared by precipitation process using ultrasonic irradiation and hydrothermal method, respectively. Supported ZnO catalysts were prepared and the effect of different supports on the photocatalytic activity of ZnO nanoparticles was investigated. All prepared samples were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Fourier Transform-Infra Red Spectroscopy (FTIR), UV–vis spectroscopy (UV–vis) and BET surface area technique. The photocatalytic activity of the synthesized catalysts was elucidated using the photo-oxidation of Acid Blue 92 (AB92) as a hazardous pollutant under UV light. The effect of different... 

Functionalized magnetic core-zeolitic shell nanostructures were prepared by hydrothermal and coprecipitation methods. The products were characterized by Vibrating Sample Magnetometer (VSM), X-ray powder diffraction (XRD), Fourier Transform Infrared (FTIR) spectra, nitrogen adsorption-desorption isotherms, and Transmission Electron Microscopy (TEM). The growth of mordenite nanoparticles on the surface of silica coated nickel ferrite nanoparticles in the presence of organic templates was also confirmed. Antibacterial activity of the prepared nanostructures was investigated by the inactivation of Escherichia coli as a gram negative bacterium. A new mechanism was proposed for inactivation of E.... 

A series of bifunctional catalysts Cu-ZnO-ZrO 2/Al-modified H-Mordenite were prepared by co precipitating sedimentation method and were characterized. Active sites were dispersed well. The synthesis of dimethyl ether (DME) via direct CO hydrogenation was evaluated in a three-phase slurry reactor. Cu-ZnO-ZrO 2/Al-modified H-Mordenite was a suitable catalyst for the production of dimethyl ether from synthesis gas. The appropriate ratio of methanol synthesis catalyst (Cu-ZnO-ZrO 2) to methanol dehydration catalyst (Al-modified H Mordenite) was 2:1. In this condition, CO conversion and DME selectivity were ≈ 68% and 82%, respectively. This is an abstract of a paper presented at the 7th European... 

The liquid-phase dehydration of methanol to dimethyl ether was investigated over various materials including synthetic zeolites, namely, ZSM-5, Y, Mordenite, Ferrierite and Beta as well as silica and alumina. The key characters investigated were the Si/Al ratio and cation exchange. The results showed that the Mordenite zeolite exchanged with H+ exhibited the highest activity in dehydration of methanol. After finding the most active catalyst, the Mordenite zeolite was modified with Cu, Zn, Ni, Al, Zr, Mg and Na via wet-impregnation method to further improve its selectivity, and characterized by AAS, XRD, NH3-TPD, NH3-FT-IR and BET surface area techniques. It was found that these materials... 

Mordenite (MOR) nanocrystals were synthesized using the hydrothermal method. Sol-gel and deposition methods were utilized to modify the zeolite surface with TiO2 and then AgBr or AgCl particles. Photocatalysts were characterized by using X-ray diffraction, Brunauer-Emmett-Teller (BET), and scanning electron microscopy techniques. Activity was evaluated by photodegradation of Acid Blue 92 as an azo dye. The effect of silver halide deposition on the photocatalytic behavior of the prepared nanocomposites was studied under both ultraviolet (UV) and visible light, and the results were compared. The results showed that AgCl/TiO2/MOR was more active under UV, while with visible source,... 

Functionalized magnetic core-zeolitic shell nanocomposites were prepared via hydrothermal and precipitation methods. The products were characterized by vibrating sample magnetometer, X-ray powder diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption-desorption isotherms, and transmission electron microscopy analysis. The growth of mordenite nanocrystals on the outer surface of silica-coated magnetic nanoparticles at the presence of organic templates was well approved. The removal performance and the selectivity of mixed metal ions (Pb2+ and Cd2+) in aqueous solution were investigated via the sorption process. The batch method was employed to study the sorption kinetic,... 

Synthesis of dimethyl ether (DME) via methanol dehydration were investigated over various catalysts, and via direct CO hydrogenation over hybrid catalysts composed of Al-modified H-Mordenite zeolite and Cu/ZnO/ZrO 2. H-Mordenite zeolite exhibited the highest activity in dehydration of methanol. However, its selectivity toward dimethyl ether was rather low. For this reason, the H-Mordenite was modified. Modification of zeolites was performed by wet impregnation method and considered catalysts were characterized by AAS, XRD and NH3-TPD analyses. Results of catalytic tests indicated that H-Mordenite modified with 8 wt% aluminum oxide was the best catalyst for synthesis of dimethyl ether from...