Sharif Digital Repository

For direction of arrival (DOA) estimation in compact arrays, a new approach based on time delay and amplitude estimation is presented for a known signal. The DOA can be accurately estimated without any calibration sources since the mutual coupling and multipath effects can be eliminated by the inherent mechanism of the proposed algorithm. The algorithm has significantly lower error and much less computational burden compared with the previous methods in high signal-to-noise ratio (SNR) conditions  

In this study, the authors perform a complete survey on S-parameter method applications to compensate the coupling effect in circular arrays. The authors illustrate that, despite the simplicity and ease of measurements, the S-parameter algorithm has an adequate performance in comparison with the external calibration techniques in real environments. Based on the simulation and experimental results, for unmatched arrays and low-frequency applications [e.g. high-frequency (HF) radars], the S-parameter method performance is demonstrated to be comparable in accuracy to the external calibration techniques. Despite multipath effect and structural scattering, the direction of arrival can be... 

In a Multiple Input Multiple Output (MIMO) radar unlike conventional phased array radar, we can choose freely between the probing signals transmitted via its antennas to maximize the transmitted power around specific target locations or to approximate a desire beam-pattern in different manners that many papers have taken into consideration so far. In an operational radar or communication environment, one of the usual phenomenon that happens is multipath. In this paper we'd like to take this effect into consideration and show that how this effect can influence our beam-pattern in a covariance based MIMO radar beam-forming. We will show that multipath can change beam-pattern peak direction,... 

The multi-path phenomenon is one of the main causes of error in Direction Of Arrival Estimation systems which are located in a complex environment. The received signal in this environment consists of Line Of Sight (LOS) and multi-path components which are delayed versions of the LOS signal with the amplitude and the phase depending on the path length. In order to eliminate the multi-path signal, it is necessary to estimate the amplitude, the phase, and the delay of the signal. To this end, a method based on correlation which has been already used to estimate amplitudes and delays of Line Of Sight and multi-path signals in GPS systems, is implemented. After this estimation process, a phase... 

Bistatic passive radars have many advantages over the monostatic ones because they are undetectable and silent. In passive coherent location, the original source of energy is derived from a waveform of opportunity in the environment and the re-radiated energy from the target is processed to decide about the existence of the target. More over bistatic radars receive forward scatters from target in place of the backscatters in monostatics systems. As a result of the larger forward scattered RCS, the stealth targets can be detected easier. Passive radar does not need any frequency allocation so are very attractive for surveillance. Multipath effects and direct path interference are two problems... 

Exact spread-spectrum code tracking in the presence of multipath is an important issue in distance and time measurement systems. Different tracking algorithms based on feedback, feedforward or a combination of them reduce multipath effects, however, the accuracy of the tracking in presence of short-delay multipath signals is still a problem. In this paper, we consider feedback delay lock loops (DLL) and gating function schemes that have shown better performance with lower complexity under multipath. We develop a shot-noise process model for the control signal of a DLL in the presence of multipath signals and determine the range of tracking errors they cause. Then, we propose a method based... 

In the realization of adaptive beamforming algorithms, the least-mean-squares (LMS) algorithm had been the most popular scheme used for Smart Antenna systems. This Paper proposes an alternate scheme in the form of the Normalized LMS (NLMS) algorithm with active tap detection for WCDMA systems. By taking advantage of spatial filtering, the proposed scheme promises to reduce the bandwidth required for transmitting data by improving convergence rate. The performance of the Frequency Domain NLMS algorithm in the presence of multipath effects and multiple users is analyzed using simulations. This analysis is compared to that of LMS algorithm and suggests improvement in the convergence rate and...