Sharif Digital Repository

Simply obtained by the oxidation of levodopa in alkaline media, polylevodopa nanoparticles are able to quench the fluorescence emission of CdTe quantum dots (QDs) via energy transfer mechanism. The extent of this quenching can be exploited for the quantification of levodopa, as an important therapeutic agent in the treatment of Parkinson's disease. However, to effectively improve the detection performance, in this study, we have designed a ratiometric probe by making use of variations in both the emission of QDs and the intrinsic emission of polylevodopa nanoparticles. The enhanced sensitivity, in particular, arose from the measurement of the ratio of fluorescence intensities at two... 

A turn-on fluorometric assay is described for determination of the activity of enzyme telomerase. For this purpose, graphene quantum dots (GQDs) were first modified with the telomeric sequence (5′-amino-AATCCGTCGAGCAGAGTT-3′) via a condensation reaction. Injection of graphene oxide causes instant quenching of the blue fluorescence of the GQDs. Addition of cell extract containing telomerase, triggers the extension of telomer via addition of specific sequence (TTAGGG)n to its 3′ end. Fluorescence, best measured at excitation/emission wavelengths of 390/446 nm, is subsequently restored due to folding of the extended telomeric sequence into G-quadruplex structure. The method was applied to the... 

The creation of novel engineered multimodal nanoparticles (NPs) is a key focus in bionanotechnology and can lead to deep understanding of biological processes at the molecular level. Here, we present a multi-component system made of gold-coupled core-shell SPIONs, as a new nanoprobe with signal enhancement in surface Raman spectroscopy, due to its jagged-shaped gold shell coating  

Signal generation techniques for visual detection of analytes have received a great deal of attention in various sensing fields. These approaches are considered to be advantageous when instrumentation cannot be employed, such as for on-site assays, point-of-care tests, and he althcare diagnostics in resource-constrained areas. Amongst various visual detection approaches explored for non-invasive quantitative measurements, ratiometric fluorescence sensing has received particular attention as a potential method to overcome the limitations of intensity-based probes. This technique relies on changes in the intensity of two or more emission bands (induced by an analyte), resulting in an effective... 

A ratiometric fluorescent nanoprobe is developed with a wide color variation for visual determination of spermine (SP) and spermidine (SD) in meat samples. The green emission provided from the combination of yellow emissive quantum dots and blue emissive carbon dots turns into pink when SP or SD are present. The results show that the developed sensor has good linearity in the range of 0.5–10 and 0.5–80 µM for SP and SD and suitable detection limits were achieved including 0.2 and 2.1 µM for SP and SD. The probe was highly selective in the presence of amino acids and other biogenic amines. RGB indices were extracted to build a combinational logic gate for visual and simultaneous detection of... 

Chiral discrimination has always been a hot topic in chemical, food and pharmaceutical industries, especially when dealing with chiral drugs. Enantiomeric recognition not only leads to better understanding of the mechanism of molecular recognition in biological systems, but may further assist in developing useful molecular devices in biochemical and pharmaceutical studies. By emerging nanotechnology and exploiting nanomaterials in sensing applications, a great deal of attention has been given to the design of optical nanoprobes that are able to discriminate enantiomers of chiral analytes. This review explains how engineering nanoparticles (NPs) with desired physicochemical properties allows... 

In this study, a novel approach for sensitive and extremely selective detection of copper ions has been developed based on fluorescence resonance energy transfer (FRET) between AuNPs as an acceptor and fluorescein isothiocyanate (FITC) as a donor. Initially, the fluorescence of the FITC molecule turns-off due to adsorption to the AuNPs surface. However, the fluorescence of the FITC-AuNPs system was switched to turn-on by adding d-Pencillamine (d-PC) to the solution mixtures as FITC molecules are released upon displacement by d-PC on the NPs surface. The higher affinity of d-PC toward the surface of AuNPs was further evidenced by controlling the fluorescence intensity enhancement of the... 

A reliable, simple, and sensitive fluorescence method was developed for the determination of methyl parathion (MP) in rice using MoS2 quantum dots (QDs). Rapid hydrolysis of MP under alkaline conditions, and thus the formation of p-nitrophenol (p-NP) can be used for MP detection. The functional mechanism of the nanoprobe relies on p-nitrophenol-induced photoluminescence quenching of MoS2 QDs. The high probability of resonance energy transfer (RET) stems from the spectral overlap of MoS2 QD emission spectra and the absorption spectra of p-NP. The high value of the Stern-Volmer constant (KSV = 3.73 × 104 M-1) suggests the efficient quenching of MoS2 QDs by MP in the course of the ET process.... 

A sensitive fluorometric assay is described for the direct determination of the antibiotic sulfadiazine. Silver nanoparticles placed on graphene quantum dots (Ag NP-GQDs) were synthesized by reduction of AgNO3 with sodium borohydride in the presence of GQDs. The growth of Ag NPs on the surface of the GQDs causes quenching of the blue fluorescence of the GQDs with an emission maximum at 470 nm by surface-enhanced energy transfer. If sulfadiazine is added, it interacts with Ag NPs and fluorescence is restored. Under optimal conditions, the fluorescence increases linearly in the sulfadiazine concentration range of 0.04–22.0 μM. The detection limit is 10 nM with relative standard deviations of... 

The widespread use of pesticides in pest management has boosted the demands for developing highly sensitive probes for on-site monitoring. Herein we presented a sensitive enzyme-free ratiometric probe for determination of methyl parathion (MP), as an organophosphate pesticide using TGA-capped CdTe QDs and carbon dots (CDs). Unlike previous methods in which hydrolysis product of MP is instrumental in the response of the sensors, here, self-assembly of cetyltrimethylammonium bromide (CTAB) on the surface of non-modified yellow-emissive CdTe QDs facilitates the quenching of CTAB-QDs upon addition of MP while the fluorescence intensity of CDs remains constant. Using a smartphone, the ratiometric... 

This research regards to a two-dimensional lateral pushing nanomanipulation using Atomic Force Microscope (AFM). Yet a reliable control of the AFM tip position during the AFM-based manipulation process is a chief issue since the tip can jump over the target nanoparticle and then the process can fail. However, a detailed Modeling and understanding of the interaction forces on the AFM tip is important for prosperous manipulation control and a nanometer resolution tip positioning. In the proposed model, Lund-Grenoble (LuGre) dynamic friction model is used as friction force on the contact surface between the nanoparticle and the substrate. This model leads to a stick-slip behavior of the... 

Introduction: Proximal spinal muscular atrophy (SMA) is one of the most significant neurodegenerative diseases amongst the autosomal-recessive genetic disorders which is caused by the absence of protein survival of motor neuron (SMN). A critical nucleotide difference in SMN2 compared to SMN1 gene leads to an inefficient protein. Hence, homozygous lack of SMN1 provides a progressive disease. Due to the high prevalence, up to now, several molecular diagnostic methods have been used which most of them are lengthy, expensive, and laborious. Methods: In the present study, we exploited a gold nanoprobe-based method for semi-quantitative SMN1 gene dosage analysis compared to SMN2. The assay was... 

This research presents two-dimensional controlled pushing-based nanomanipulation using an Atomic Force Microscope (AFM). A reliable control of the AFM tip position is crucial to AFM-based manipulation since the tip can jump over the target nanoparticle causing the process to fail. However, detailed modeling and an understanding of the interaction forces on the AFM tip have a central role in this process. In the proposed model, the Lund-Grenoble (LuGre) method is used to model the dynamic friction force between the nanoparticle and the substrate. This model leads to the stick-slip behavior of the nanoparticle, which is in agreement with the experimental behavior at nanoscale. Derjaguin... 

Although numerous molecular methods for spinal muscular atrophy (SMA) detection have been exploited, most of hem are laborious, time consuming and costly. Recently, gold nanoparticles (AuNPs) have attracted attention in the field of colourimetric bioanalysis, because AuNP aggregation can be tracked with the naked eye as well as ultraviolet-visible (UV-vis) peak analysis. Here, based on a non-cross linking platform, a colourimetric-based method was used to evaluate the capability of thiolated oligo-AuNPs (Au nanoprobes) to distinguish between normal individuals, carriers and those with SMA. In this platform, removal of the repulsive force of the Au nanoprobes using high salt concentration... 

This research regards to a two-dimensional lateral pushing nanomanipulation using Atomic Force Microscope (AFM). Yet a reliable control of the AFM tip position during the AFM-based manipulation process is a chief issue since the tip can jump over the target nanoparticle and then the process can fail. However, a detailed Modeling and understanding of the interaction forces on the AFM tip is important for prosperous manipulation control and a nanometer resolution tip positioning. In the proposed model, Lund-Grenoble (LuGre) dynamic friction model is used as friction force on the contact surface between the nanoparticle and the substrate. This model leads to a stick-slip behavior of the... 

In this study, a novel, simple and sensitive ratiometric fluorescence method is presented for the detection of very low quantities of the carbaryl in Iranian apple using cadmium telluride quantum dots (CdTe QDs) nanoprobe. The principle of the proposed strategy relies on the rapid hydrolysis of the carbaryl under an alkaline condition and production of the 1-naphthol with a blue emission at 470 nm. Besides, using the CdTe QDs with a yellow emission at 580 nm, as a reference, improves the visual tracking of carbaryl through changes in color tonality. The herein described methodology is applied for enzyme-free visual detection of carbaryl with satisfactory results in the presence of other... 

Chiral recognition has long been a challenging issue to deal with in biological systems, drug design and food authentication. Implementing nanoparticle-based probes with intrinsic or induced chirality in this field has addressed several issues concerning sensitivity, reliability, rapidness and the cost of chiral sensing platforms. Yet, research into chiral nanoprobes that can be used for visual monitoring of chiral substances is still in its infancy. As part of this study, a visual chiral recognition platform has been developed in which a combination of blue-emitting carbon dots (BCDs) and mercaptopropionic acid-capped CdTe quantum dots (MPA-QDs) with inherent chiroptical activity were...